Bias-temperature instabilities of polysilicon gate HfO/sub 2/ MOSFETs

Bias-temperature instabilities (BTI) of HfO/sub 2/ metal oxide semiconductor field effect transistors (MOSFETs) have been systematically studied for the first time. NMOS positive BTI (PBTI) exhibited a more significant V/sub t/ instability than that of PMOS negative BTI (NBTI), and limited the lifetime of HfO/sub 2/ MOSFETs. Although high-temperature forming gas annealing (HT-FGA) improved the interface quality by passivating the interfacial states with hydrogen, BTI behaviors were not strongly affected by the technique. Charge pumping measurements were extensively used to investigate the nature of the BTI degradation, and it was found that V/sub t/ degradation of NMOS PBTI was primarily caused by charge trapping in bulk HfO/sub 2/ rather than interfacial degradation. Deuterium (D/sub 2/) annealing was found to be an excellent technique to improve BTI immunity as well as to enhance the mobility of HfO/sub 2/ MOSFETs.     

Rapid pyrolysis of brown coal and oil shale

A brown coal, peat and oil shale were subjected to a rapid pyrolysis process and medium-heat-value gases together with tar were collected. The char residue was of high activity and suitable for gasification to create a two-stage gasification system. The coal-tar is used for manufacturing liquid fuels and chemicals.     

Solvent extraction of oil from soybean flour II— pilot plant and two-solvent extractions

The process of grinding soybeans to a fine flour and extracting the flour with hexane was studied on a pilot plant scale. The crude oil from the pilot plant study had 15 ppm phosphorus and was suitable for physical refining after a light acid pretreatment and bleaching. The refined oil showed a Lovibond color of 1.4 yellow and 0.3 red. The pilot plant study also showed that grinding of the soybeans and the separation of solid from miscella were the most difficult steps in solvent extraction with fine flour. A laboratory study on separation of miscella from meal by aqueous ethanol reduced the hold-up volume, but it did not remove all the miscella. A test with betacarotene showed that only the miscella outside the flour particles was displaced. Aqueous ethanol solutions used as a second solvent extracted additional nontriglyceride materials (primarily phospholipids) from the meal. Also, the free fatty acid content of the oil was increased with aqueous ethanol solution wash. The quality of the extracted crude oil was lowered by using a second solvent, but it had the advantage of needing only one centrifugation to separate miscella from meal.     

Deformation of metallic glasses with special emphasis in supercooled liquid region

1　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｅｎｓｉｖｅｅｆｆｏｒｔｓｈａｖｅｂｅｅｎｃａｒｒｉｅｄｏｕｔｏｖｅｒｔｈｅｐａｓｔｄｅｃａｄｅｔｏｄｅｖｅｌｏｐｍｅａｎｓｔｏｓｌｏｗｄｏｗｎｔｈｅｐｈａｓｅｔｒａｎｓｆｏｒｍａｔｉｏｎｋｉｎｅｔｉｃｓｄｕｒｉｎｇｔｈｅ     

Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass

Mechanical deformation of Pd₄₀Ni₄₀P₂₀ was characterized in compression over a wide strain rate range (3.3×10⁻⁵ to 2×10³ s⁻¹) at room temperature. The compression sample fractured with a shear plane inclined 42 degree with respect to the loading axis, in contrast to 56 degree for the case of tension. This suggests the yielding of the material deviates from the classical von Mises yield criterion, but follows the Mohr-Coulomb yield criterion. Fracture stress as well as strain was found to decrease with increasing applied strain rate. The compressive stress (1.74 GPa) was also found to be higher than the tensile fracture stress at a quasi-static strain rate. Close examination of the stress–strain curves revealed that localized shear might have occurred at a compressive stress of about 1.4 GPa, much lower than the “apparent” yield stress of 1.74 GPa. However, the stress of 1.4 GPa for shear band initiation is almost the same as the fracture stress measured at a dynamic strain rate of 5×10² s⁻¹. These results suggested that the fracture of a bulk metallic glass is sensitive to the applied loading rate.     

Effects of CCEP and Sc on superplasticity of Al–5.6Mg–0.7Mn alloys

Trace amount (0.3?wt%) of scandium is added to Al–5.6Mg–0.7Mn alloy to form uniformly distributed Al₃Sc precipitates for producing a fine-grained and stable microstructure at high temperature through cross-channel extrusion process. Superplasticity and hot workability of the Sc-containing Al–5.6Mg–0.7Mn alloy, after extrusion, are also examined. The result indicates that Al–5.6Mg–0.7Mn alloys with and without 0.3?wt% Sc after extrusion of six passes at 300°C, fine-grained structures were observed with grain sizes of 1–2?µm and improvement of mechanical properties. Furthermore, Al₃Sc phase can effectively retard recrystallization to increase the thermal stability and remain equiaxed. The elongation of Al–5.6Mg–0.7Mn alloy with Sc addition to failure is extended to 873% maximum at high temperature of 450°C at strain rate of 1?×?10^?1?s^?1after six passes in the CCEP.     

支持软件演化过程的知识库

软件演化过程是当今软件工程研究的一个重要课题,一些支持软件演化过程的策略和方法被提出,有效地支持了软件的演化.本文以信息复用的策略为基础,提出了在软件演化过程中通过知识库的应用对信息进行复用,以及知识库的应用框架来支持软件演化过程.     

X80管线钢在力电化学耦合作用下CO2腐蚀行为的研究

以典型的管线钢材料X80钢为对象,采用动电位极化和电化学阻抗谱技术,研究了在弹性拉伸应力(60%σ_(ys))和塑性拉伸应力(108%σ_(ys))状态下,不同CO_2分压和Cl~-质量分数对材料腐蚀的影响规律。结果表明:受拉伸应力作用的X80钢腐蚀速率随CO_2分压的增大而增大,但并非单纯正相关关系;随Cl~-质量分数的增大,呈现先升高后降低的规律,当Cl~-质量分数为3.5%时,X80钢的腐蚀速率达到最大值。此外,塑性应力状态下X80钢的腐蚀速率明显高于弹性应力状态下的值,原因是塑性应力提高了金属表面的电化学反应活性。     

Serum levels of polybrominated diphenyl ethers (PBDEs) in foam recyclers and carpet installers working in the United States

Increased exposure to the flame retardants known as polybrominated diphenyl ethers (PBDEs) may be expected to occur during the recycling of polyurethane foam containing these chemicals. To date, no studies in the United States have investigated occupational exposure to these flame retardants during recycling processes. The objective of the present study was to determine if individuals working in foam recycling facilities, and/or carpet installers who may install carpet padding manufactured from recycled foam, possess significantly higher PBDE serum levels relative to that of the general U.S. population. As a control group, serum was collected from four spouses and one clerical worker. In addition, levels in workers were also compared to the recently published national health and nutrition examination survey (NHANES) data set on PBDEs in the general U.S. population. Serum samples were collected in duplicate and analyzed by two different laboratories as quality control. Total PBDE levels were found to be significantly higher (p < 0.05) in the individuals recycling foam and installing carpet (n = 15) relative to the control group (n = 5). Median sigmaPBDE levels in the foam recyclers, carpet layers, and control group were 160, 178, and 19 ng/g lipid, respectively. In contrast, concentrations of a polybrominated biphenyl (BB-153) and a polychlorinated biphenyl (CB-153) were equivalent among all groups tested. The PBDE congeners BDE-47, 99, 100, and 153 contributed 90% of the sigmaPBDE concentration in serum and no differences in congener patterns were apparent among the different groups. Relative to concentrations measured in the NHANES, foam recyclers and carpet layers have body burdens that are an order of magnitude higher. These data suggest individuals recycling foam-containing products, and/ or using products manufactured from recycled foam (i.e., carpet padding), have higher body burdens of PBDEs, and thus may be at higher risk from adverse health effects associated with brominated flame retardant exposure.