Stress due to a moving band source of heat and mechanical load on the work surface during grinding

The grinding operation is considered to be equivalent to a moving band source of heat and mechanical load on the surface of a semi-infinite solid, producing very high temperature on the surface of the workpiece. The resulting temperature may result in high stress in the workpiece. It is thus desirable to be able to predict the stress levels expected during the grinding process.     

Biobased thermosets from the free‐radical copolymerization of conjugated linseed oil

New polymeric thermosets were prepared through the bulk free‐radical copolymerization of 100% conjugated linseed oil, acrylonitrile, and divinylbenzene. Under the appropriate reaction conditions and with the appropriate curing sequence, 61–96 wt % of the oil was incorporated into the crosslinked thermosets. The resulting yellow, transparent thermosets varied from being soft and flexible to being hard and brittle. Dynamic mechanical analysis and thermogravimetric analysis showed that these thermosets had good mechanical properties and thermal stability. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 979–985, 2007     

Characteristic study of N07718 superalloy surface prepared by cold spray

For better performance in erosive–corrosive, wear and other extreme environmental conditions surface properties of metals and alloys are usually altered by different techniques. Amongst the various surface coating techniques cold spraying is a relatively new and less reported method. Coating formation at energy lower than the melting stage of materials brings novelty to this process. In this study surface of UNS No. - N07718 alloy is altered by cold spraying chromium-carbide (nickel-chromium) layer. The microstructure properties of this cold sprayed surface are observed by various characterization techniques and the results are used to study mechanism of coating layer formation by cold spray process. This newly developed cold sprayed surface is found to be eligible for further testing in wear and erosive-corrosive environmental conditions.     

Correlation between ionic conductivity and fluidity of polymer gel electrolytes containing NH4CF3SO3

Nonaqueous polymer gel electrolytes containing ammonium triflate (NH₄CF₃SO₃) and dimethylacetamide (DMA) with polymethylmethacrylate (PMMA) as the gelling polymer have been synthesized which show high value of conductivity (~ 10^-2 S/cm) at 25°C. The conductivity of polymer gel electrolytes containing different concentrations of NH₄CF₃SO₃ shows a small decrease with the addition of PMMA and this has been correlated with the variation of fluidity of these gel electrolytes. The small decrease in conductivity with PMMA addition shows that polymer plays the role of stiffener and this is supported by FTIR results which also indicates the absence of any active interaction between polymer and NH₄CF₃SO₃ in these gel electrolytes.     

Introducing Glycolinkers for the Functionalization of Cytotoxic Drugs and Applications in Antibody–Drug Conjugation Chemistry

Antibody–drug conjugates (ADCs) are promising alternatives to naked antibodies for selective drug‐delivery applications and treatment of diseases such as cancer. Construction of ADCs relies upon site‐selective, efficient and mild conjugation technologies. The choice of a chemical linker is especially important, as it affects the overall properties of the ADC. We envisioned that hydrophilic bifunctional chemical linkers based on carbohydrates would be a useful class of derivatization agents for the construction of linker–drug conjugates and ADCs. Herein we describe the synthesis of carbohydrate‐based derivatization agents, glycolinker–drug conjugates featuring the tubulin inhibitor monomethyl auristatin E and an ADC based on an anti‐EGFR antibody. In addition, an initial in vitro cytotoxicity evaluation of the individual components and the ADC is provided against EGFR‐positive cancer cells.     

Protonic polymer gel electrolytes based on carboxylic acids: ortho and inductive effects

The conductivity of polymer gel electrolytes containing three aromatic and three aliphatic carboxylic acids has been studied, viz. (i) ortho-, meta- and para-hydroxybenzoic acids and (ii) oxalic, malonic and succinic acids. Polymeric gels were prepared by adding different wt% of polymer poly(methylmethacrylate) (PMMA) in solutions of respective acids in high dielectric constant organic solvent mixtures of propylene carbonate, ethylene carbonate and dimethylformamide. The highest conductivity in the first of the above group of acids is for o-hydroxy benzoic acid and oxalic acid in the second group of acids. Results have been explained on the basis of ortho and/or inductive effects which depend upon the relative positions of the substituted hydroxyl (–OH) and carboxyl (–COOH) group or that of the two carboxylic groups.     

Fixation of distal femoral osteotomies with self-reinforced poly(L/DL)lactide 70 : 30/bioactive glass composite rods. An experimental study on rats

Self-reinforced poly(L/DL)lactide 70:30/bioactive glass [SR-P(L/DL)LA/bioactive glass] composite rods, 2 mm in diameter and 36 mm in length, were implanted into the dorsal subcutaneous tissue of 16 rats. Osteotomies of the distal femur were fixed with these rods (2 x 15 mm) in 64 other rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests, and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of the osteotomized and intact control femora were performed. At 24 weeks the mechanical properties had decreased significantly. Thirty-nine osteotomies healed uneventfully. One of the 64 evaluated osteotomies showed signs of infection at six weeks, and there were 19 non-unions and six delayed unions. In 20 operations the fixation was loose and out of these 14 non-unions were observed. No gross signs of inflammatory or foreign-body reactions were observed. The present investigation showed that the mechanical strength and fixation properties of SR-P(L/DL)LA/bioactive glass composite rods are suitable for fixation of cancellous bone osteotomies in rats as long as the operative technique is correct. The present article is the first report on the application of SR-P(L/DL)LA/bioactive glass composite rods for fixation of cancellous bone osteotomies.