Research and development of liquid hydrogen (LH2) temperature monitoring system for marine applications

Monitoring the temperature in liquid hydrogen (LH₂) storage tanks on ships is important for the safety of maritime navigation. In addition, accurate temperature measurement is also required for commercial transactions. Temperature and pressure define the density of liquid hydrogen, which is directly linked to trading interests. In this study, we developed and tested a liquid hydrogen temperature monitoring system that uses platinum resistance sensors with a nominal electrical resistance of approximately 1000 Ω at room temperature, PT-1000, for marine applications. The temperature measurements were carried out using a newly developed temperature monitoring system under different pressure conditions. The measured values are compared with a calibrated reference PT-1000 resistance thermometer. We confirm a measurement accuracy of ±50 mK in a pressure range of 0.1 MPa–0.5 MPa.     

Analysis of Reusability using ‘Marginal Reuse Rate’

While reuse is an effective lifecycle option in terms of reduction of environmental loads and value of reutilization, reuse has inherent difficulties. Our naive question is why component reuse of home appliances seems impossible while that of photocopiers succeeded. This paper clarifies an essential factor for successful reuse; that is, the balance between supply and demand of reusables, and proposes an index named ‘marginal reuse rate,’ which indicates upper limit of reusability. By using this index, reusability of several products is analyzed. The marginal reuse rate indicates that design of lifecycle, in addition to product design, is indispensable for successful reuse.     

Short- and long-term strength characteristics of particulate-filled cast epoxy resin

Particulate-filled thermosetting composites are widely used, yet little systematic work has been done on their long-term strength characteristics. In this study short-term tensile, flexural, and impact tests as well as tensile creep-rupture tests were made for unfilled and filled epoxy to clarify the effects of filler size, filler content, and temperature. Fillers used were silica, alumina particles, and glass beads. Test temperatures were varied from 25 to 110°C. As a result of short-term testing, it was found that the Petch relation held between strength and filler size if brittle fracture occurred, while a strength and filler size if brittle fracture occurred, while a strengthening effect existed when ductile fracture occurred. On creeprupture testing, a strengthening is observed with filler size and content for silica and glass beads. The Arrhenius plot of rupture time for various filler sizes and contents converges to a characteristic point corresponding to the glass transition temperature of the material. Using this relation, a modified Larson-Miller master rupture curve is proposed which can predict the long-term strength of particulate-filled thermosetting composites as functions of rupture time, temperature, filler size, and content.     

Mechanical strengthening of Si cantilever by chemical KOH etching and its surface analysis by TEM and AFM

Mechanical strengthening of a Si cantilever by applying KOH wet etching was investigated. Two kinds of Si cantilever specimens having the different crystallographic orientations of the sidewall surfaces, i.e., Si{100} and Si{110}, were fabricated from the same SOI wafer by a Bosch process. The typical height and pitch of the scalloping formed on the sidewall were 248 and 917 nm, respectively. A 50 % KOH (40 °C) chemical wet etching was applied to increase the fracture stress of the Si cantilever. The fracture stress in the both of Si{100} and Si{110} cantilevers increased with the advance of the etching. The obtained maximum fracture stress in Si{100} and Si{110} were 4.2 and 3.7 GPa, respectively. Sidewall surface of the cantilever was analyzed to investigate the mechanical strengthening of Si cantilever by wet etching. The etched surface crystalline was analyzed by the transmission electron microscope (TEM), and confirmed that the thickness of the affected flow layer was less than 10 nm from the obtained TEM image. Then the change of the surface roughness by the KOH etching was analyzed by the atomic force microscope. The surface was smoothened with the advance of the KOH etching. The roughness value of Ra in Si{100} and Si{110} decreased to 12.1 and 37.7 nm, respectively.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Characterization of the microbial community in an anaerobic ammonium-oxidizing biofilm cultured on a nonwoven biomass carrier

The enrichment and characterization of anaerobic ammonium-oxidizing biofilm cultures are ongoing in our laboratories. Biomass, with a predominately red color, demonstrating simultaneous removal of ammonium and nitrite under autotrophic and anoxic conditions, which is characteristic of anaerobic ammonium-oxidizing planctomycetes, was enriched and maintained for an extended period on a polyester nonwoven carrier. To investigate the bacterial composition of the mature biofilm community, 16S rDNA sequences were amplified by PCR and comparative analyses using DNA databases were conducted. Only one sequence had a notable similarity (92.2%) to that of the first discovered anaerobic ammonium-oxidizing planctomycete and lesser, yet significant, similarities to the 16S rDNA sequences of other recently reported anaerobic ammonium-oxidizing strains. The newly discovered strain (designated KSU-1) reported here was dominant among detectable members of the biofilm community. By fluorescence imaging, KSU-1 was shown to form spherical clusters wrapped in a thin layer of Zoogloea sp. Possible interactions and interdependencies of these two species are discussed with regard to the putative unculturability of the anaerobic ammonium-oxidizing planctomycetes.     

Multi-structure information retrieval method based on transformation invariance

The needs of efficient and flexible information retrieval on multi-structural data stored in database and network are significantly growing. Especially, its flexibility plays one of the key roles to acquire relevant information desired by users in retrieval process. However, most of the existing approaches are dedicated to a single content and data structure respectively, e.g., relational database and natural text. In this work, we propose “Multi-Structure Information Retrieval” (MSIR) approach applicable to various types of contents and data structures by adapting a small part of the approach to data structures. The power of this approach comes from the use of the invariant feature information obtained from byte patterns in the files through some mathematical transformation. The experimental evaluation of the proposed approach for both artificial and real data indicates its high feasibility. Fuminori Adachi: He received his Master of engineering from Osaka University in ’03. He is enrolled in the doctoral course of Osaka University from ’03. His current research interest includes scientific discovery, data mining and machine learning techniques. Takashi Washio, Ph.D.: He received his Ph.D. from Tohoku University in ’88. In ’88, he became a visiting reseacher in Massachusetts Institute of Technology. In ’90, he joined Mitsubishi Research Institute Inc., and is working for Osaka University from ’96. His current research interest includes scientific discovery, data mining and machine learning techniques. Atsushi Fujimoto: He is enrolled in the master cource of Osaka University from ’03. His Current research interest includes correlation analysis, data mining and machine learning techniques. Hiroshi Motoda, Ph.D.: He received his Ph.D. from University of Tokyo in ’72. In ’67, he joined Hitachi Ltd. and has been working for Osaka University since ’96. His current research interest includes scientific discovery, data mining and machine learning. Hidemitsu Hanafusa: He received Master of Engineering from Keio University in ’83. In ’83, he joined The Kansai Electric Power Co. Ins. (KEPCO). He researched on Maintenance Support System at INSS from ’97 to ’02. Now, he is working in KEPCO.     

Molecular characterization of Xenopus embryo heparan sulfate. Differential structural requirements for the specific binding to basic fibroblast growth factor and follistatin

Enzymatic elimination of heparan sulfate (HS) causes abnormal mesodermal and neural formation in Xenopus embryos, and HS plays an indispensable role in establishing the embryogenesis and tissue morphogenesis during early Xenopus development (Furuya, S., Sera, M., Tohno-oka, R., Sugahara, K., Shiokawa, K., and Hirabayashi, Y. (1995) Dev. Growth Differ. 37, 337-346). In this study, HS was purified from Xenopus embryos to investigate its disaccharide composition and binding ability to basic fibroblast growth factor (bFGF) and follistatin (FS), the latter being provided in two isoforms with core sequences of 315 and 288 amino acids (designated FS-315 and FS-288) originating from alternative mRNA splicing. Disaccharide composition analysis of the purified Xenopus HS showed the preponderance of a disulfated disaccharide unit with uronic acid 2-O-sulfate and glucosamine 2-N-sulfate, which has been implicated in the interactions with bFGF. Specific binding of the HS to bFGF and FS-288, the COOH-terminal truncated form, was observed in the filter binding assay, whereas HS did not bind to FS-315, indicating that the acidic Glu-rich domain of FS-315 precluded the binding. The binding of the HS to bFGF or FS-288 was markedly inhibited by heparin (HP) and various HS preparations, but not by chondroitin sulfate, supporting the binding specificity of HS. The binding specificity was further investigated using FS-288 and bovine intestinal [3H]HS. Competitive inhibition assays of the HS binding to FS-288 using size-defined HP oligosaccharides revealed that the minimum size required for significant inhibition was a dodecasaccharide, which is larger than the pentasaccharide required for bFGF binding. The binding affinity of FS to HS increased in the presence of activin, a growth/differentiation factor, which could be inactivated by direct binding to FS. These results, taken together, indicate that the structural requirement for binding of HS to bFGF and FS is different. HS may undergo dynamic changes in its structure during early Xenopus embryogenesis in response to the temporal and spatial expression of various growth/differentiation factors.