Short- and long-term strength characteristics of particulate-filled cast epoxy resin

Particulate-filled thermosetting composites are widely used, yet little systematic work has been done on their long-term strength characteristics. In this study short-term tensile, flexural, and impact tests as well as tensile creep-rupture tests were made for unfilled and filled epoxy to clarify the effects of filler size, filler content, and temperature. Fillers used were silica, alumina particles, and glass beads. Test temperatures were varied from 25 to 110°C. As a result of short-term testing, it was found that the Petch relation held between strength and filler size if brittle fracture occurred, while a strength and filler size if brittle fracture occurred, while a strengthening effect existed when ductile fracture occurred. On creeprupture testing, a strengthening is observed with filler size and content for silica and glass beads. The Arrhenius plot of rupture time for various filler sizes and contents converges to a characteristic point corresponding to the glass transition temperature of the material. Using this relation, a modified Larson-Miller master rupture curve is proposed which can predict the long-term strength of particulate-filled thermosetting composites as functions of rupture time, temperature, filler size, and content.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Multi-structure information retrieval method based on transformation invariance

The needs of efficient and flexible information retrieval on multi-structural data stored in database and network are significantly growing. Especially, its flexibility plays one of the key roles to acquire relevant information desired by users in retrieval process. However, most of the existing approaches are dedicated to a single content and data structure respectively, e.g., relational database and natural text. In this work, we propose “Multi-Structure Information Retrieval” (MSIR) approach applicable to various types of contents and data structures by adapting a small part of the approach to data structures. The power of this approach comes from the use of the invariant feature information obtained from byte patterns in the files through some mathematical transformation. The experimental evaluation of the proposed approach for both artificial and real data indicates its high feasibility. Fuminori Adachi: He received his Master of engineering from Osaka University in ’03. He is enrolled in the doctoral course of Osaka University from ’03. His current research interest includes scientific discovery, data mining and machine learning techniques. Takashi Washio, Ph.D.: He received his Ph.D. from Tohoku University in ’88. In ’88, he became a visiting reseacher in Massachusetts Institute of Technology. In ’90, he joined Mitsubishi Research Institute Inc., and is working for Osaka University from ’96. His current research interest includes scientific discovery, data mining and machine learning techniques. Atsushi Fujimoto: He is enrolled in the master cource of Osaka University from ’03. His Current research interest includes correlation analysis, data mining and machine learning techniques. Hiroshi Motoda, Ph.D.: He received his Ph.D. from University of Tokyo in ’72. In ’67, he joined Hitachi Ltd. and has been working for Osaka University since ’96. His current research interest includes scientific discovery, data mining and machine learning. Hidemitsu Hanafusa: He received Master of Engineering from Keio University in ’83. In ’83, he joined The Kansai Electric Power Co. Ins. (KEPCO). He researched on Maintenance Support System at INSS from ’97 to ’02. Now, he is working in KEPCO.     

Endothelin-1 secretion from cultured vascular endothelial cells of DOCA-salt hypertensive rats

The profile of endothelin-1 (ET-1) release from cultured vascular endothelial cells (ECs) obtained from deoxycorticosterone acetate (DOCA)-salt hypertensive rats, was examined and compared with that from normotensive sham rats. ET-1 release from ECs was increased in a time-dependent manner, and the level of DOCA-salt hypertensive rats was higher than that of sham rats. Incubation of ECs with transforming growth factor (TGF)-beta 1 or thrombin resulted in a significant increase in the ET-1 release, while FK409, a novel nitric oxide donor, produced a dose-dependent decrease in the release. In the case of ECs from DOCA-salt hypertensive rats, the potencies of TGF-beta 1- or thrombin-induced action was much less than that seen with sham rats, while the difference of reactivity to FK409 was not observed between ECs of DOCA-salt rats and sham rats. Thus, ET-1 production in ECs appears to be up-regulated in DOCA-salt hypertensive rats. In addition, there seems to be an abnormalities in the signaling pathway via TGF-beta 1- or thrombin-induced enhancement of ET-1 production in ECs of DOCA-salt hypertensive rats.     

Influence of the image quality deterioration of a tilted thick specimen on electron tomography

In electron tomography (ET) based on a transmission electron microscope, the effective thickness of a specimen increases with the tilt angle and, therefore, the projection quality may deteriorate because of electron scattering. The information-missing region, however, can be reduced by broadening the specimen tilt range. To clarify the general influence of these effects on ET, the projection quality varying with the tilt angle was quantitatively evaluated for a 5-microm thick specimen observed with a 3 MV ultrahigh-voltage electron microscope. Simulations of three-dimensional reconstruction were then performed for different specimen thicknesses and tilt ranges. As a result, the ET accuracy was shown to decrease as the specimen thickness increased. However, an optimum specimen-tilt range, at which ET could reach its highest accuracy, was found to exist and become small with the increase of the specimen thickness. The presented results are helpful for determining the specimen thickness limitation on the ET resolution and improving the ET fidelity of thick specimens.     

Solving shortest paths efficiently on nearly acyclic directed graphs

Shortest path problems can be solved very efficiently when a directed graph is nearly acyclic. Earlier results defined a graph decomposition, now called the 1-dominator set, which consists of a unique collection of acyclic structures with each single acyclic structure dominated by a single associated trigger vertex. In this framework, a specialised shortest path algorithm only spends delete-min operations on trigger vertices, thereby making the computation of shortest paths through non-trigger vertices easier. A previously presented algorithm computed the 1-dominator set in O(mn) worst-case time, which allowed it to be integrated as part of an O(mn+nrlogr) time all-pairs algorithm. Here m and n respectively denote the number of edges and vertices in the graph, while r denotes the number of trigger vertices. A new algorithm presented in this paper computes the 1-dominator set in just O(m) time. This can be integrated as part of the O(m+rlogr) time spent solving single-source, improving on the value of r obtained by the earlier tree-decomposition single-source algorithm. In addition, a new bidirectional form of 1-dominator set is presented, which further improves the value of r by defining acyclic structures in both directions over edges in the graph. The bidirectional 1-dominator set can similarly be computed in O(m) time and included as part of the O(m+rlogr) time spent computing single-source. This paper also presents a new all-pairs algorithm under the more general framework where r is defined as the size of any predetermined feedback vertex set of the graph, improving the previous all-pairs time complexity from O(mn+nr²) to O(mn+r³).     

Influence of the methyl group on the dielectric constant of boron carbon nitride films containing it

LSI interconnect insulators made using low dielectric constant (low-k) materials are required for high performance devices with a small RC delay. We investigated a boron carbon nitride film containing the methyl group (Me–BCN) using tris-di-methyl-amino-boron (TMAB: B[N(CH₃)₂]₃) gas as a low-k material. In addition, we studied the influence of the methyl group on the dielectric constant (k-value) and the properties of the Me–BCN films. It was found that the k-value of the Me–BCN films decreases with increasing number of C–H bonds due to the methyl group (CH₃). The number of O–H bonds due to water incorporation is suppressed by increasing the number of C–H bonds. Consequently, we suggested that a lower k-value can be realized by the suppression of water invasion by a hydrophobic surface due to methyl bonds. Thus, the control of the methyl group is important to achieve a low-k material using Me–BCN films.     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043