1-GHz-spaced 16-channel arrayed-waveguide grating for a wavelength reference standard in DWDM network systems

We fabricated a 1-GHz-spaced 16-channel arrayed-waveguide grating (AWG) by using a new AWG configuration where the path of each arrayed waveguide winds backward and forward across a 4-in diameter wafer without crossing any other waveguides. The ultra-narrow (< 1 GHz) and stable transmission bands of this AWG can be used to construct a wavelength reference standard covering the S, C, and L bands in the dense wavelength-division-multiplexing network systems whose frequency deviation is /spl plusmn/160 MHz.     

370 W output power GaN-FET amplifier for W-CDMA cellular base stations

A single-ended amplifier using small packaged GaN-FETs exhibits a record 2.14 GHz W-CDMA output power. The amplifier, composed of paralleled 48 mm gate periphery FET die, delivers a peak saturated output power of 371 W with a linear gain of 11.2 dB at a drain voltage of 45 V under 2.14 GHz 3GPP W-CDMA signal input. The output power density (output power/package size) of 1.1 W/mm/sup 2/ is twice as high as that of the existing over 300 W GaAs-FET amplifiers. A low 5 MHz offset ACLR of -36 dBc with a drain efficiency of 24% is also obtained at 8 dB power back off from the saturated output power.     

Interfacial strength and chemistry of additive-free silicon nitride ceramics brazed with aluminium

Two kinds of additive-free silicon nitride ceramics were brazed with aluminium; one was with as-ground faying surfaces and the other was with faying surfaces heat-treated at 1073K for 1.8 ksec in air. The heat-treatment of the silicon nitride ceramics formed a silicon oxynitride layer on the faying surfaces and increased the brazing strength of the joints. A silica-alumina non-crystalline layer and a β′-sialon layer were formed successively from the aluminium side at the interface of the joints. The heat-treatment which made the former layer thicker is a necessary process in making reliable, strong brazed joints.     

Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

A construction of codes with exponential error bounds on arbitrarydiscrete memoryless channels

This correspondence proposes an explicit construction of codes achieving capacity for arbitrary discrete memoryless channels. The proposed code is obtained by concatenating variable inner codes and an algebraic geometry code. Further, we clarify that the proposed code achieves the error exponent obtained by Forney for concatenated codes     

Analysis of distribution of Campylobacter jejuni and Campylobacter coli in broilers by using restriction fragment length polymorphism of flagellin gene

The incidence of Campylobacter jejuni and Campylobacter coli in broiler farms was 33.9% (19/56). C. jejuni-positive flocks accounted for 20.0% (17/85) and C. coli-positive ones was 4.7% (4/85). There were 14 patterns (fla type) of restriction fragment length polymorphism (RFLP) of flagellin A gene among these 22 strains of C. jejuni and C. coli including the standard strain C. jejuni ATCC 33560. Different fla types of Campylobacter were isolated from broilers in different growing cycles on the same farms. Four strains of C. jejuni were isolated from four breeder farms and four fla types of C. jejuni were detected from their progenies reared on growing farms. Three fla types of C. jejuni detected from the progenies were different from those of each breeder. Also, the other three fla types of C. jejuni were detected from different progenies of each growing farm during the next growing cycle. These findings indicate that the RFLP analysis may contribute to epidemiological studies of C. jejuni and C. coli contamination of broilers and suggest the risk of contamination with different types of Campylobacter in every growing cycle of broilers on the farm even on the same farm. They also supported that there was little likeliness of the vertical transmission of C. jejuni and C. coli from breeders to broilers.