Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

A case of macrocystic cervical neurinoma diagnosed by MRI with Gd-DTPA

The authors report a rare case of a large cystic cervical neurinoma. A 45-year-old female was admitted to our clinic because of motor weakness of the right upper extremity, numbness of the right fingers and right posterior cervical pain. Metrizamide CT myelography demonstrated the outline of a low density mass. MRI showed a mass revealing low signal intensity on T1-weighted image, high signal intensity on T2-weighted image and marginal enhancement on contrast image with Gd-DTPA. The mass which was diagnosed as cystic tumor, was located in the intradural extramedullary space between C4 to C5 segments. After C4 through C5 laminectomy, the tumor was found to originate from the C5 anterior motor root. The tumor consisted mostly of a cystic part with a very thin solid compartment beneath the capsule. Postoperative course of the patient was uneventful. Although spinal neurinoma is one of the most common spinal tumors, an almost completely degenerated large cystic spinal neurinoma is extremely rare. MRI with Gd-DTPA was useful for the diagnosis of the cystic neurinoma by clearly enhancing the margin of the tumor.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Effects of Environmental Temperature and Compression Energy on Polymorphic Transformation During Tabletting

The effects of temperature on the polymorphic transformation and the compression of chlorpropamlde forms A and C during tabletting were investigated by X-ray diffractometry. The X-ray diffraction profiles of the sample powders deagglomerated after compression were recorded to calculate the degree of polymorphic transformation. A single punch eccentric tabletting machine equipped with two load cells (upper and lower punches) and with a noncontact displacement transducer was used to measure the compression stress, energy and distance between punches. A heater and a liquid nitrogen pool were mounted on the die of the tabletting machine, and the die temperature was controlled with a thermocontroller. Two types of compression methods, multi-tabletting at room temperature and single tabletting at 0-45°C, were used in the present study. In the first method, the stable form A or metastable form C was loaded in to the die and the sample was compressed with a compression stress of 196 MPa. Compression was repeated from 1 to 30 times. The results for forms A and C suggested that both forms were mutually transformed, and that the content of forms A and C reached equilibrium above 100 J/g of compression energy after more than 10-times compression. After 30-times compression, the content of A, C, and the noncrystalline solid form were almost constant at about 45%, 25% and 30%, respectively. The compression energy was estimated to be 500-600 J/g. In the second method, single tabletting at 0° and 45°C, the amount of form C transformed from form A at 45°C was about two times larger than that at 0°C at the same compression energy. The amount of form A transformed from form C at 45°C was almost the same as that transformed at 0°C. This suggests that the mechanochemical stability of form A was affected by compression temperature, while that of form C was independent of temperature. The crushing strength (CS) of from A tablet was about two times higher than that of form C even at the same porosity. The relationships between log (CS) of form A tablets compressed at 0 or 45°C and porosity showed straight lines with the same slope, but the slope for form C tablets compressed at 45°C was smaller than that for those compression at 0°C. From these results it appears that the transformation mechanism of forms A and C during compression was as follows: Form A or C was converted to a noncrystalline solid by mechanical energy, and then the solid was transformed into form A or C. The transformation of every form was affected by the environmental temperature.     

Stability of tetragonal ZrO2 phase in Al2O3 prepared from Zr-Al organometallic compounds

Zr-Al organometallic compounds have been spray-dried and heated at temperatures 600 to 1400°C to prepare ZrO₂-Al₂O₃ composite powders. The powders consist of balloon-like particles 0.5 to 2 m in diameter with homogeneously dispersed tetragonal ZrO₂ grains 0.1 to 0.2 m in diameter. The tetragonal fraction of ZrO₂ in the composite powders is higher than that in the powders prepared from sols of Zr(OBuⁿ)₄ and Al[OCH(CH₃)₂]₃. The fraction is affected by the organofunctional group in the Zr-Al compounds.Zr(OBuⁿ)₄ = Zr(OC₄Hgⁿ)₄; Al[OCH(CH₃)₂]₃ = Al(OPrⁱ)₃.     

Age-related accumulation of phosphatidylcholine hydroperoxide in cultured human diploid cells and its prevention by α-tocopherol

The levels of phosphatidylcholine hydroperoxide in serially cultured human fetal diploid fibroblasts at various population doubling levels were determined by high-performance liquid chromatography combined with chemiluminescence detections. This methodology utilizes a mixture of cytochromec and luminol as post-column hydroperoxide group specific luminescent reagents. The cellular hydroperoxide content increased with age from 0.34 to 27.72 pmol/10⁶ cells. At the end of the cells'in vitro lifespan (51st population doubling level), the hydroperoxide content per 10⁶ cells reached about 80 times the level found in cells of the 20th population doubling level. Supplementation of exogenous α-tocopherol to the culture medium prevented hydroperoxide accumulation, but did not extent the lifespanin vitro. The results indicate that substantial intracellular phospholipid hydroperoxide accumulation occurred in the course of aging of human fetal liploid fibroblasts.