Efficient Excitation of Hybrid Modes in a THz Clinotron

Journal of Infrared, Millimeter, and Terahertz Waves - Various regimes of hybrid, bulk-surface, modes being excited in the clinotron oscillator with a sheet electron beam and nonuniform grating...     

Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Up- and down-regulation of calpain inhibitor polypeptide, calpastatin, in postischemic hippocampus

A dental student developed swelling of the lips and peri-oral urticaria, immediately after placement of a dental rubber dam during a chairside demonstration of clinical dentistry. A provisional diagnosis of a Type I hypersensitivity reaction to natural rubber latex was made and an appointment organised for specialist investigations. The student reported an atopic history and allergy to peanuts. A Radioallergosorbent Test (RAST), to measure Ig-E antibodies to latex, was positive. The dental student was given advice concerning the avoidance of natural rubber latex. Dental staff must be aware of potentially serious reactions to natural rubber latex in the dental surgery.     

An innovative semianalytical technique for ceramic evaluation at microwave frequencies

We have developed an innovative semianalytical technique for various substrate material characterization. The developed technique is a measurement procedure and data-reduction formulation that takes into consideration the radiation loss in a resonant structure, allowing for a more effective means of dielectric- and conductor-loss determination for a microstrip ring resonator and its substrate material. We separate dielectric and conductor loss precisely, evaluate the contribution of each term in the overall loss performance, and analytically predict the error in their respective predicted value.     

Tunable laser for sensing atmospheric transmission in the infrared region of 11 ∼ 16 µm

We succeeded in observing the continuously tunable, pulsed InSb SFR (Spin-Flip Raman) laser emission in the infrared region of 11～16µm (11.4～16.3µm) from only one InSb device, merely by adjusting the pumping wavelength (11 lines from the infrared NH₃ laser) and the applied magnetic field (0～80 kGauss).     

A sensorless brushless dc motor system

This paper describes a brushless dc motor system without position or speed sensor. The brushless motor consists of a permanent magnet synchronous motor and a voltage-source inverter capable of controlling the amplitude and frequency of voltage. The rectangular-shaped stator current with a conducting interval of 120° (electrical) is controlled to be in phase with the trapezoidal back electromotive force. This results in producing maximum torque. Variable speed is achieved by adjusting the average motor voltage similarly to chopper control of dc motors. In this paper, two sensorless position detecting methods, i.e., an “indirect method” suited for the lower-speed range and a “direct method” suited for the higher-speed range are proposed. The combination of the two makes it possible to detect the rotor position over a wide-speed range. Furthermore, a speed-sen-sorless PLL control is proposed in applying the principle of the direct method. Experimental results obtained from a prototype brushless dc motor are shown to confirm the validity of the sensorless drive. The starting procedure of the motor also is discussed because it is impossible to detect the rotor position at a standstill.     

Dispersion compensation with SBS-suppressed fibre phase conjugator using synchronised phase modulation

204 km, 10 Gbit/s standard optical fibre transmission is successfully demonstrated using the mid-span spectral inversion technique with a stimulated Brillouin scattering suppressed fibre phase conjugator, proposed recently by Tani and Yamashita. Transmission performance has been improved compared with a conventional phase conjugator.     

Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

DNA-inorganic hybrid material as selective absorbent for harmful compounds

Double-stranded DNA is one of functional polymers, but the large amounts of DNA sources, such as salmon milt and shellfish gonads, have been discarded as industrial wastes. Therefore, conversion of this discarded DNA to be a useful material would be beneficial to utilize the unique property of DNA. These materials including DNA have been prepared by mixing with the organic polymers, such as alginic acid, collagen, and chitosan. However, since these materials have consisted from entirely organic components, these do not have the mechanical strength for a material. So, we prepared the organic-inorganic hybrid materials by mixing DNA with silane coupling reagents bis(trimethoxysilylpropyl)amine or bis[(3-trimethoxysilyl)propyl]ethylenediamine. These hybrid materials with the flexibility were water-insoluble and resistant to hydrolysis by nuclease. In addition, the mechanical strength of this hybrid material was approximately twice as high as that of DNA without mixing with silane coupling reagents. Furthermore, the double-stranded DNA in the hybrid materials has been maintained in a B-form structure in aqueous solution. Thus, we demonstrated the utilization of DNA as a functional material. As a result, this material could selectively accumulate harmful DNA-intercalating compounds with the planar structure, such as dibenzo-p-dioxin, dibenzofuran, and ethidium bromide. Organic-inorganic hybrid material including double-stranded DNA has potential to serve as a useful biomaterial for medical, engineering, and environmental applications.