EFFECT OF DEVELOPER PROPERTIES ON PRINT QUALITY

We investigated the dependence of the toner charge-to-mass ratio (q/m) in a two-component electrophotographic developer on the shaking time, toner concentration (T/C), carrier sizes, and the carrier core and the coating materials, as well as the resulting print qualities in terms of print density, background density, tone reproduction, resolution, and dot gain. Four different sizes of spherical ferrite carriers, four different carrier coating materials, and an irregular iron carrier were used with two types of toner: 14 um red toner (NP-4080) and 8 um cyan toner (CLC-500). The q/m measurement by the blow-off method showed that the red toner charge was positive while the cyan toner charge was negative with these carriers. The toner q/m values, which depended on the shaking time and decreased with the increasing T/C were much more affected by the larger carrier and the smaller toner. The carriers which yielded charges in the proper range produced better print qualities than did the other carriers that yielded a toner q/m     

Breakdown characteristics of oil and paper insulation for a very fast transient voltage

This paper describes the dielectric breakdown characteristics of oil and oil‐impregnated paper for very fast transient (VFT) voltages. Blumlein circuits generate VFT voltages of 60 and 300 ns in a pulse width that simulates disconnecting switching surges in gas‐insulated switch gears. We measured the breakdown voltages of needle‐to‐plane, plane‐to‐plane oil gaps and several pieces of paper between plane electrodes for VFT and lightning impulse voltages. The measured data were formulated in V‐t characteristics and Weibull probability distributions. The inclination n of V‐t characteristics of insulating paper is 150, which is less than n = 13.7 of the plane‐to‐plane oil gap in the VFT time range. The shape parameters of Weibull distribution obtained in this study show that the scattering of breakdown voltages of paper is much less than that of oil. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 16–24, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10043     

Effect of Milling on Slip Casting of Partially Stabilized Zirconia

Specimens of partially stabilized zirconia were slip cast from aqueous suspensions and sintered at 1500°C for 3 h. The relative density of the cast specimens and the firing shrinkage of the sintered specimens depend on the milling time for the suspension. Vickers hardness and K_IC values of 11.46±s0.07 GN/m² and 6.10 ±0.04 MN.m^3/2, respectively, were obtained for all sintered specimens. The dispersion of the suspension is important in increasing the relative density of the cast specimens.     

Tri-Gate Bulk MOSFET Design for CMOS Scaling to the End of the Roadmap

A tri-gate bulk MOSFET design utilizing a low-aspect-ratio channel is proposed to provide an evolutionary pathway for CMOS scaling to the end of the roadmap. 3-D device simulations indicate that this design offers the advantages of a multi-gate FET (reduced variability in performance and improved scalability) together with the advantages of a conventional planar MOSFET (low substrate cost and capability for dynamic threshold-voltage control).     

Photoresponsive peptide and polypeptide systems: part II. Photochromism of poly(l-ornithine) containing various azo-contents in side chains

Poly(L-ornithine)s having various azo-contents in the side chains were synthesized by the water-soluble carbodiimide procedure. The photochemical properties of the polypeptides poly[N^δ-p-(phenylazo)benzoyl-L-ornithine] (PPABLO) containing 3–77 mol% azobenzene were investigated by absorption and circular dichroism spectroscopy in hexafluoro-2-propanol (HFIP) or water, and in HFIP-water or methanol-water solvent mixtures. The photochromism of the dichroic bands of the PPABLOs containing 20–77 mol% azobenzene in the visible and ultraviolet wavelength regions was found to be mostly reversible as a function of irradiation time at different wavelengths due to the photostationary state (above 80% trans-cis photoisomerization) of the azo aromatic moieties. The PPABLO containing 3.2 mol% azobenzene in water exhibited conformational changes from random coil to helix by the addition of methanol or sodium dodecyl sulphate (SDS). The photo-induced conformational change was observed in HFIP-water-SDS solvent mixtures, while no conformational change was seen in water and HFIP-water solvent mixtures.     

Mechanical stress control in a VLSI-fabrication process: a method for obtaining the relation between stress levels and stress-induced failures

An ideal fabrication process is designed to minimize mechanical stress in semiconductor devices and to improve device reliability. Mechanical stress levels were predicted by in-house simulations supported by a thin-film database. These stress levels were correlated with stress-induced defects by TEM analysis supported by fail bit addressing on matured megabit SRAMs. Amorphous-doped silicon film with various annealing temperatures were used for the gate electrode to change the mechanical stress in devices and to get the direct relationship between predicted stress levels and stress related defects. The authors describe brief guidelines for suppressing dislocations in the small geometry shallow-trench isolation process utilizing this system. Polysilicon thickness in the W-polycide gate electrode is designed to minimize mechanical stress in the gate oxide and to suppress the gate oxide failure in probe and class tests. Moreover, critical stress generates dislocations during post source/drain ion implantation anneal obtained by a ball indentation method. This indicated that lower temperature anneal is effective in suppressing the dislocations. A two-step anneal was introduced to suppress dislocations and to enable higher ion activation.     

STRUCTURE FORMATION OF COATED FILMS WITH DISPERSED PIGMENTS DURING DRYING

In the drying of coated films with dispersed pigments, such as floppy disks, the structure of the film is formed during the drying process and depends on the drying condition. It is important to understand the structure formation during drying for the design of the dryer and die better quality of the product. We measured die drying characteristics of the film and determined the structure of dried film experimentally. A qualitative model for the structure formation during drying of the coated film is suggested.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Melatonin inhibits naloxone-induced luteinizing hormone release in ovariectomized estrogen-primed rats

The present study aimed to examine the effect of melatonin on naloxone-induced luteinizing hormone (LH) secretion in ovariectomized estrogen-primed rats. A single intracerebroventricular (i.c.v.) injection of naloxone (mu opioid receptor blocker, 15 micrograms) or an intravenous (i.v.) injection of LH-releasing hormone (LHRH, 50 ng/kg) elicited a transient and significant increase in the serum LH concentration within 10 min. While an i.c.v. injection of 100 ng melatonin by itself did not change the basal LH release, it almost completely inhibited the naloxone-induced LH release. Melatonin (10 ng) also significantly reduced the effect of naloxone. However, an i.c.v. injection of 100 ng melatonin did not affect the LHRH-induced LH release. In separate experiments, the effect of melatonin on naloxone-induced pulsatile LH secretion was studied in estrogen-treated rats. A continuous i.v. infusion of naloxone (20 mg/kg/h) induced LH pulses in rats treated i.c.v. with saline. An i.c.v. administration of 100 ng melatonin, which by itself did not affect basal LH secretion, significantly reduced the frequency, but not the amplitude, of LH pulses induced by the naloxone infusion. These results show that melatonin has a suprapituitary site of action to inhibit naloxone-induced LH release, and suggest that melatonin has an effect in inhibiting the activity of the hypothalamic LHRH pulse generator, either directly or indirectly, in female rats.