Roller drawing of ultrahigh molecular weight polyethylene

The roller drawing of ultrahigh molecular weight polyethylene (UHMW-PE) sheets were carried out in the roller temperature T_r range of 100–140°C. In addition to the roller drawing in the solid state (T_r = 100°C), we attempted to crystallize the molten UHMW-PE sheet under the roller-drawing process (T_r = 100–140°C). The tensile and dynamic viscoelastic properties, the molecular orientation, and the microstructure of the roller-drawn UHMW-PE sheets were investigated. The mechanical properties of UHMW-PE sheets were much improved by crystallization during the roller drawing process at T_r = 140°C. The sheets roller-drawn at T_r = 135 and 140°C exhibited c-axis orientation to the draw direction and (100) alignment in the sheet plane. However, at T_r = 100°C the elastic motion of the amorphous chains induces the twinnings of lattice, which enhances the transition to the (110) alignment in the sheet plane. The dynamic storage modulus below γ-dispersion temperature showed good correlation with crystallinity and orientation functions, while taut tie molecules and thick crystallites play an important role in the storage modulus above γ-dipersion temperature.     

Anaerobic Biodegradation Tests of Poly(lactic acid) under Mesophilic and Thermophilic Conditions Using a New Evaluation System for Methane Fermentation in Anaerobic Sludge

Anaerobic biodegradation tests of poly(lactic acid) (PLA) powder were done at the thermophilic (55 °C) and mesophilic temperature (35 °C) under aquatic conditions [total solid concentrations of the used sludge were 2.07% (at 55 °C) and 2.24% (at 35 °C)] using a newly developed evaluation system. With this system, the evolved biogas is collected in a gas sampling bag at atmospheric pressure. This method is more convenient than using a pressure transducer or inverted graduated cylinder submerged in water. PLA was degraded about 60% in 30 days, about 80% in 40 days and about 90% in 60 days at 55 °C. On the other hand, the PLA degradation started in 55 days at 35 °C and degradation rate was much slower than at 55 °C.     

Effect of plasma surface modification on electrical conduction in polyethylene

High-density polyethylene films 50 μm thick were exposed to the downstream plasma flow of RF glow discharges in argon, hydrogen, or oxygen. It was found that many transvinylene and unreacted radicals remain after the argon or hydrogen plasma treatment, and that carbonyl groups are formed in the oxygen plasma treatment. The conduction current was smaller in the hydrogen-plasma treated samples and the samples exposed to oxygen or ozone after hydrogen-plasma treatment than in the untreated samples. Thermal pulse current measurements indicate that the treated surface layer traps electrons or holes and reduces the field strength at the electrode surface, thus suppressing further injection of electrons or holes.     

Reaction Sintering of Cubic Boron Nitride Using Volatile Catalysts

Reaction sintering behavior of cBN, which is accompanied by the transformation from hBN to cBN in the presence of 30 wt% diamond seed grains, was investigated under high pressure conditions (6.0–7.5 GPa, 1400–1700°C, 0–30 min) using volatile catalysts such as NH₄NO₃, NH₄Cl, and NH₂NH₂. Fully dense sintered compacts having a Vickers microhardness of more than 5000 kg/mm² were prepared with no residual catalytic solid components. The activation energy for the conversion from hBN to cBN was 200–230 kJ/mol. Adsorbed N₂, H₂, and/or NH _x components which were formed by decomposition of these catalysts during high pressure and temperature treatments, would have a favorable kinetic effect on cBN formation from hBN and its simultaneous sintering.     

Sintering Metal–Organic Framework Gels for Application as Structural Adhesives

Metal–organic frameworks (MOFs)/coordination polymers are promising materials for gas separation, fuel storage, catalysis, and biopharmaceuticals. However, most applied research on MOFs is limited to these functional materials thus far. This study focuses on the potential of MOFs as structural adhesives. A sintering technique is applied to a zeolitic imidazolate framework-67 (ZIF-67) gel that enables the joining of Cu substrates, resulting in a shear strength of over 30 MPa, which is comparable to that of conventional structural adhesives. Additionally, systematic experiments are performed to evaluate the effects of temperature and pressure on adhesion, indicating that the removal of excess 2-methylimidazole and the by-product (acetic acid) from the sintered material by vaporization results in a microstructure composed of large spherical ZIF-67 crystals that are densely aggregated, which is essential for achieving a high shear strength.     

Novel poly-gamma-glutamate-processing enzyme catalyzing gamma-glutamyl DD-amidohydrolysis

The pgdS gene product of Bacillus subtilis, PgdS, cleaves poly-gamma-glutamate (PGA) in an endo-peptidase-like fashion. However, its catalytic property remains obscure. In this study, a simple assay for the PgdS enzyme using 1-fluoro-2,4-dinitrobenzene was developed, and some characteristics of PgdS, such as optimal pH, were examined. The enzyme was strongly inhibited by a thiol-modifying reagent, suggesting that it possesses essential cysteine residue(s) in catalysis. PgdS exhibited a high affinity to PGA that consisted mainly of D-glutamate residues, but no affinity to PGA composed only of L-glutamate residues (L-PGA). The enzyme processed DL-copolymer-type PGA (DL-PGA) with an average molecular mass of 1,000 kDa to a high-molecular-mass L-glutamate-rich fragment (average 200 kDa), the L-rich PGA fragment, and low-molecular-mass fragment composed mostly of D-glutamate residues (average 5 kDa), D-fragment. To deepen our understanding of the catalytic property of the PgdS enzyme, we analyzed the structures of the N- and C-terminal regions and found that D-glutamyl residues successively lie even at both ends of the L-rich PGA fragment. Our observations indicate that PgdS is a novel endo-peptidase that specifically cleaves the gamma-amide linkage between two D-glutamate residues in PGA, i.e., gamma-glutamyl DD-amidohydrolase. The enzyme is possibly useful in the biochemical processing of B. subtilis DL-PGA.     

Synthesis of platelike CaTiO3 particles by a topochemical microcrystal conversion method and fabrication of textured microwave dielectric ceramics

Platelike CaTiO₃ particles with an orthorhombic perovskite structure have been synthesized by topochemical microcrystal conversion (TMC) from platelike precursor particles of the layer-structured CaBi₄Ti₄O₁₅ at 950 °C. The CaTiO₃ particles inherited and retained the shape of the precursor particles with a thickness of approximately 0.3 μm, and a width of 2–6 μm. XRD analysis showed that in the TMC reaction, the crystallographic {0 0 1} plane of CaBi₄Ti₄O₁₅ is converted into the {1 0 0} plane of CaTiO₃. Using the platelike CaTiO₃ particles as templates in the templated grain growth method, dense {1 0 0} grain-oriented CaTiO₃ ceramics having a {1 0 0} orientation could be fabricated at sintering temperatures between 1350 and 1500 °C. The maximum orientation factor reached 99.7% at 10% of template. It was found that texturing improves microwave dielectric low-loss properties, providing a 1.55 times higher Q_f value of 9310 GHz in textured ceramics compared to that of 6005 GHz in non-textured ceramics.     

Development of function-graded proton exchange membrane for PEFC using heavy ion beam irradiation

The graded energy deposition of heavy ion beam irradiation to polymeric materials was utilized to synthesize a novel proton exchange membrane (PEM) with the graded density of sulfonic acid groups toward the thickness direction. Stacked Poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) films were irradiated by Xe⁵⁴⁺ ion beam with the energy of 6 MeV/u under a vacuum condition. The induced trapped radicals by the irradiation were measured by electron spin resonance (ESR) spectroscopy. Irradiated films were grafted with styrene monomer and then sulfonated. X-ray photo-electron spectroscopy (XPS) spectra showed that the densities of sulfonic acid groups were controlled for injection “Surface” and transmit “Back” sides of the fabricated PEM. The membrane electrode assembly (MEA) fabricated by the function-graded PEM showed improved fuel cell performance in terms of voltage stability. It was expected that the function-graded PEM could control the graded concentration of sulfonic acid groups in PEM.     

A case of crushing head injury with bilateral abducens and facial nerve palsies

A 20-year-old male was admitted to our hospital suffering from a crushing head injury. At accident, his head had been compressed by the printing machine on both temporal regions. He remained at dull conscious. On admission one hour after the injury, he showed bilateral sixth-nerve and seventh nerve palsies and bleeding from the nose. CT scan showed marked pneumocephalus, traumatic subarachnoid hemorrhage, fluid collections in the bilateral sphenoid sinuses and right mastoid air cells. Bone CT disclosed bilateral temporal bone fractures. MRI did not show cerebral parenchymal damage. He recovered fully conscious at four hours after the injury, but cranial nerve palsies sustained over 30 days after the injury. Bilateral decompression of the facial canal were performed at day 31. At one year after the injury, bilateral abducens nerve palsies and facial nerve palsies recovered incompletely (grade III). The case report and the mechanism of such cranial nerve injuries by low-velocity crushing head injury is described.