Aging response of the young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr for biomedical applications

Alloys for implant devices require improved strength but a reduced Young’s modulus, in order to become mechanically more compatible with adjacent bone tissues. In this study, a new metastable β-type titanium alloy, Ti-29Nb-13Ta-4.6Zr (wt pct), was subjected to aging treatment to produce different microstructures, and the resulting mechanical properties, including the Young’s modulus, were measured. The Young’s modulus of this alloy is found to be sensitive to microstructures generated by various heat treatments. For microstructures varying from (α + β) to (α + β + ω) and (β + ω), the Young’s modulus increases with an accompanying increase in tensile strength and hardness, but decreases in ductility. The (β + ω) microstructure has a low strength, high modulus, and poor ductility and cannot be used for biomedical applications. For an (α + β) microstructure, the volume fraction of the phases is shown to be the main factor that determines the mechanical properties.     

X-ray absorptiometry

Bone mass measurements are essential in the diagnosis of osteoporosis, the monitoring of its progression, and the evaluation of therapeutical responses. Among various methods of bone mass measurements, single- and dual-X-ray absorptiometry, SXA and DXA, have shown excellent fundamental performance. In this paper, the principles of SXA and DXA; i.e., factors of fundamental performance, such as precision, data-acquisition, and radiation dose, the practice of DXA, recent advances in DXA, such as the lateral spine scan, the measurement of body composition, application to BMD measurement of the bones of small animals and at sites of metal implants, morphometry of the spine, and geometrical measurement in the proxial femur, and clinical applications to osteoporosis were particularly reviewed.     

Radiation tolerance for the SMASH-series front-end chips for a silicon micro-strip detector

The radiation tolerance for prototype front-end chips designed for a silicon micro-strip detector was examined with a ⁶⁰Co irradiation source to establish an allowable range of the radiation dose. The irradiated front-end chips were SMA²SH-64A, a 64-channel preamplifier array; SMA²SH-1, a single-channel preamplifier circuit with a comparator; and Control-C, a digital-control chip for the preamplifiers.     

Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Thermal Expansion of Solid Solutions in the ZrTiO4—In2O3—M2O5 (M = Sb, Ta) System

Axial and dilatometric thermal expansions and phase transformations were studied for solid solutions having the α-PbO₂ structure in the ZrTiO₄—In₂O₃—M₂O₅ (M = Sb, Ta) system with nominal formulas of Zr _x Ti _y In _z Sb _z O₄ and Zr _x Ti _y In _z Ta _z O₄ where x + y + 2 z = 2. With increased substitution of z , the cell volume increased, the difference in the b parameters at room temperature between those quenched from 1400° and 1000°C decreased, and the thermal expansion decreased. The axial thermal expansion of ZrTi _y In _z · Ta _z O₄ with z = 0.3 was almost identical with that of HfTiO₄, and those with z = 0.4 and z = 0.45 were smaller than that of HfTiO₄. Unit-cell volumes of these compound were compared with those of single oxides to make it clear that the unit-cell volume of ZrTiO₄ was small anomalously and to distinguish the normal and abnormal substitution systems. These results were explained by the working hypothesis proposed for these compounds.     

Network Design with Edge-Connectivity and Degree Constraints

We consider the following network design problem; Given a vertex set V with a metric cost c on V, an integer k≥1, and a degree specification b, find a minimum cost k-edge-connected multigraph on V under the constraint that the degree of each vertex v∈V is equal to b(v). This problem generalizes metric TSP. In this paper, we show that the problem admits a ρ-approximation algorithm if b(v)≥2, v∈V, where ρ=2.5 if k is even, and ρ=2.5+1.5/k if k is odd. We also prove that the digraph version of this problem admits a 2.5-approximation algorithm and discuss some generalization of metric TSP.     

Automated discovery of local search heuristics for satisfiability testing

The development of successful metaheuristic algorithms such as local search for a difficult problem such as satisfiability testing (SAT) is a challenging task. We investigate an evolutionary approach to automating the discovery of new local search heuristics for SAT. We show that several well-known SAT local search algorithms such as Walksat and Novelty are composite heuristics that are derived from novel combinations of a set of building blocks. Based on this observation, we developed CLASS, a genetic programming system that uses a simple composition operator to automatically discover SAT local search heuristics. New heuristics discovered by CLASS are shown to be competitive with the best Walksat variants, including Novelty+. Evolutionary algorithms have previously been applied to directly evolve a solution for a particular SAT instance. We show that the heuristics discovered by CLASS are also competitive with these previous, direct evolutionary approaches for SAT. We also analyze the local search behavior of the learned heuristics using the depth, mobility, and coverage metrics proposed by Schuurmans and Southey.     

The 2-NN Rule for More Accurate NN Risk Estimation

By proper design of a nearest-neighbor (NN) rule, it is possible to reduce effects of sample size in NN risk estimation. The 2-NN rule for the two-class problem eliminates the first-order effects of sample size. Since its asymptotic value is exactly half that of the 1-NN rule, it is possible to substitute the 2-NN rule for the 1-NN rule with a resultant increase in accuracy. For further stabilization of the risk estimate with respect to sample size, 2-NN polarization is suggested. Examples are included. The 2-NN approach is extended to M-class and 2k-NN.     

Feature extraction using problem localization

Feature extraction is considered as a mean-quare estimation of the Bayes risk vector. The problem is simplified by partitioning the distribution space into local subregions and performing a linear estimation in each subregion. A modified clustering algorithm is used to fimd the partitioning which minimizes the mean-square error.     

Structural and hydration properties of amorphous tricalcium silicate

Mechanical milling was carried out to synthesize amorphous tricalcium silicate (Ca₃SiO₅) sample, where Ca₃SiO₅ is the most principal component of Portland cement. The partial phase transformation from the crystalline to the amorphous state was observed by X-ray and neutron diffractions. Moreover, it was found that the structural distortion on the Ca-O correlation exists in the milled Ca₃SiO₅. The hydration of the milled Ca₃SiO₅ with D₂O proceeds as follows: the formation of hydration products such as Ca(OD)₂ rapidly occurs in the early hydration stage, and then proceeds slowly after about 15 h. The induction time for the hydration of the milled Ca₃SiO₅ is approximately one half shorter than that for the hydration of the unmilled one. This result means that the mechanical milling brings about the chemical activity of Ca₃SiO₅ for hydration, and may be particularly useful for increasing the reactivity in the early hydration stage.