Synthesis of thermoresponsive copolymer/silica-coated magnetite nanoparticle composite and its application for heavy metal ion recovery

To enhance chemical stability and suppress of aggregation of magnetite nanoparticles (MNPs), which are used as a support for thermoresponsive copolymer immobilization, silica coating of the MNPs is applied via the electrooxidation method. Although the resulting silica coated-MNPs also formed aggregates, the size distribution of the aggregate shifted to smaller size range. Because of that, the surface area available for copolymer immobilization increased approximately 6.7 times at maximum as compared with that of the uncoated MNPs. It contributed to the increase of the amount of the immobilized copolymer on the silica-coated MNPs, which is approximately four times larger than that on the uncoated MNPs. Fe₃O₄ dissolution test confirmed enhancement of chemical stability of MNPs. The thermoresponsive copolymer immobilized on the silica-coated MNPs shows the ability to recycle Cu(II) ion from Cu(II) containing solution by changing temperature with significantly shorter time than those in other thermoresponsive adsorbents in gel form.     

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering, the studies related to risk analysis methodology, design, and operational management, physical phenomena, and emergency preparedness and nuclear security, have been progressed. Especially, ‘risk analysis methodology’ and ‘design and operational management’ are the main categories of the field, in which more than half of published articles on Journal of Nuclear Science and Technology are related to these categories.     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Hardware system of the Earth Simulator

The Earth Simulator (ES), developed under the Japanese government’s initiative “Earth Simulator project”, is a highly parallel vector supercomputer system. In this paper, an overview of ES, its architectural features, hardware technology and the result of performance evaluation are described.

In May 2002, the ES was acknowledged to be the most powerful computer in the world: 35.86 teraflop/s for the LINPACK HPC benchmark and 26.58 teraflop/s for an atmospheric general circulation code (AFES). Such a remarkable performance may be attributed to the following three architectural features; vector processor, shared-memory and high-bandwidth non-blocking interconnection crossbar network.

The ES consists of 640 processor nodes (PN) and an interconnection network (IN), which are housed in 320 PN cabinets and 65 IN cabinets. The ES is installed in a specially designed building, 65 m long, 50 m wide and 17 m high. In order to accomplish this advanced system, many kinds of hardware technologies have been developed, such as a high-density and high-frequency LSI, a high-frequency signal transmission, a high-density packaging, and a high-efficiency cooling and power supply system with low noise so as to reduce whole volume of the ES and total power consumption.

For highly parallel processing, a special synchronization means connecting all nodes, Global Barrier Counter (GBC), has been introduced.     

Inhibition of G1 cyclin expression in normal rat kidney cells by inostamycin, a phosphatidylinositol synthesis inhibitor

We previously reported that inostamycin, an inhibitor of CDP-DG: inositol transferase, inhibited cell proliferation in normal rat kidney (NRK) cells by blocking cell cycle progression at the G1 phase. In the present paper, we report the effect of inostamycin on the serum-induced activation of Ser/Thr protein kinases that are involved in G1 progression. In quiescent NRK cells mitogen-activated protein kinase (MAP kinase) and casein kinase II were activated within 15 min after serum addition. Neither activation was affected by the treatment with inostamycin. However, in the inostamycin-treated cell, cyclin-dependent kinase 2 (CDK2) failed to be activated after serum stimulation. Since serum-induced expression of cyclin E was also suppressed by inostamycin, this inhibitor would appear to block CDK2 activation by inhibiting cyclin E expression. Furthermore, inostamycin also inhibited cyclin D1 expression induced by serum; and consequently, hyperphosphorylation of retinoblastoma protein (pRB) by RB-kinases such as CDK4 and CDK2 was abolished, which would result in elimination of functional inactivation of pRB. Thus, early G1 arrest in NRK cells by inostamycin is due to the inhibition of cyclin D1 and E expressions.     

A Fuzzy Expert System for Damage Assessment Using Genetic Algorithms and Neural Networks

Abstract: An efficient knowledge-acquisition support method is required for improvement and maintenance of the knowledge base in durability evaluation of an RC bridge deck. Such a method is proposed in this paper to automatically acquire fuzzy production rules. This method makes joint use of genetic algorithms and a neural network. Using a neural network as a subsystem, the evaluation function of genetic algorithms can be provided with the weights of the neural network. Introducing a neural network into genetic algorithms, it is possible to acquire new knowledge so that the method is useful when it is difficult to acquire knowledge in the field.     

Diffusion-controlled size-selective chloride ion sensing in the presence of bromide ion using a thin, nanoporous, plasma-polymerized coating on an Ag/AgCl electrode

We have developed a diffusion-controlled size-selective method for sensing chloride ion in the presence of bromide ion, based on a thin, nanoporous, plasma-polymerized coating of hexamethyldisiloxane on an Ag/AgCl electrode. Sub-nanometer-sized pores responsible for a highly cross-linked polymer network in the plasma-polymerized coating allowed diffusion-controlled permeation of chloride ion while blocking the larger bromide ion. An electrode coating of thickness greater than 70 nm enabled chloride detection in the concentration range 1-10 mM in the presence of 0.63 mM bromide ion. Advantages of this approach are: (1) simple design compared with ionophore-based strategies and (2) compatibility with microfabrication and mass production processes.     

Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

Subarachnoid haemorrhage induced proliferation of leptomeningeal cells and deposition of extracellular matrices in the arachnoid granulations and subarachnoid space. Immunhistochemical study

Subarachnoid haemorrhage (SAH) often leads to subarachnoid fibrosis and resultant normal pressure hydrocephalus; however, how subarachnoid fibrosis occurs is unknown. We examined the changes within arachnoid granulations (AGs) and the subarachnoid space (SAS) chronologically at the parasagittal region obtained from patients with SAH at autopsy and made comparison with controls by immunostaining for cytokeratin, specific marker for leptomeningeal cells and by the elastica Masson-Goldner methods. Within a week some AGs were torn, and many inflammatory cells filled the AGs and SAS. Cytokeratin positive cells were scarce. During the next two weeks cytokeratin positive cells increased. After three weeks, AGs and SAS were filled by dense deposits of extracellular matrices surrounded by multiple layers of leptomeningeal cells.     

Superplastic behaviour of Ti-48at.%Al two-phase titanium aluminide compacts made from mechanically alloyed powder

An HIP compact of MA-processed powder having a nominal composition of Ti-48at.% Al was produced. The compact consisted of a large amount of TiAl(λ) and a small amount of Ti₃Al (₂), in a completely ultra-fine equiaxed grain structure. This two-phase compact showed typical superplastic deformation behaviour. A maximum elongation of 550% was obtained. A strain exponent, n = 2, and grain size exponent, p = 2, were determined from the results of a strain-rate-change test and a creep test at constant initial stress using samples having various grain sizes, respectively. The activation energy for creep, Q_c at constant stress was calculated to be 350 kJ/mole. It is concluded that the superplastic deformation mechanism of the material under study is grain boundary sliding controlled by lattice diffusion in the TiAl phase.