A method for dynamic measurement of the resistance to dry heat exchange by footwear

Five different types of cold protective footwear have been tested with regard to their resistance to dry heat loss (i.e. the insulation) with a new electrically heated foot model. The model is able to simulate 'walking' movements in order to provide a more realistic simulation of wear conditions. Thermal insulation of shoes with and without a steel toe cap was the same. The insulating properties during simulated walking movements were 10-25% lower compared with static conditions. For two of the shoe models a significantly lower insulation value for the sole area was obtained when adding a weight of 30 kg. A significant difference could also be found between the insulation values of two different sizes of one of the models. Measurements with the standard method (EN 344) correlated well with the local insulation value of the sole part of the thermal foot. Correlation with the insulation value for the whole shoe was much less, variation was bigger and ranking in terms of cold protection differed between methods. The electrically heated foot model appears to provide a reproducible, accurate and more realistic method for measuring the insulation properties of shoes than EN 344.     

A planar integrated RCD snubber/voltage clamp

In order to reduce the cost, size, and weight of power electronic systems, it has become necessary to integrate electromagnetic structures, which until now have been constructed with discrete components. This approach not only reduces the component count, but also gives much greater control over parasitic elements. In this article, the authors describe an electromagnetically integrated resistor-capacitor-diode (RCD) snubber/voltage clamp that uses a planar construction technique. The design and construction are described and the performance is verified experimentally. Some advantages of the integrated component over its discrete counterpart are also given     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Primary prevention of malignant melanoma in the Stockholm Cancer Prevention Programme

The relation between intracoronary thrombus and endothelin-1 (ET-1) was studied. In a canine model, acute myocardial infarction (MI) was induced by coronary occlusive thrombus produced at a mock atheromatous plaque. Blood samples were collected from the aorta (A) and coronary vein (V). Twenty-eight open-chest dogs divided into three groups were studied. Group I (n = 15): acute MI was induced by coronary occlusive thrombus, and thrombolysis was obtained by urokinase two hours after MI. Group II (n = 8): nonocclusive thrombus was produced without inducing MI. Group III (n = 5): coronary artery was ligated for two hours and reperfused by release of ligation. In Group I, ET-1 was significantly increased after MI in A and V, and ET-1 in V was significantly more elevated than in A during thrombolysis, suggesting ET-1 production in the coronary vessels by thrombolysis. In Group II, ET-1 increased slightly during thrombus formation, but there was no difference in A and V. In Group III, ET-1 was elevated significantly after MI without A and V difference. These results indicate that there is no detectable ET-1 production with coronary thrombus formation, whereas coronary ET-1 production is detected during thrombolysis, most probably because resolved thrombus releases a more potent stimulus to ET-1 production.     

Identification of domains involved in superantigenicity of streptococcal pyrogenic exotoxin F (SpeF)

Coronary artery angioplasty or bypass is being performed for increasing numbers of patients in their seventh, eighth, ninth and even tenth decades of life. Because of the cost involved, justification for performing these procedures in the elderly has become a topic of daily discussion among those responsible for funding healthcare. Both silent and overt coronary artery disease (CAD) are more common in the population over 65 years of age. Because CAD in the elderly often presents in an atypical manner, diagnosis of the disease is frequently delayed. Partly because of the delayed diagnosis and partly because of cost considerations, coronary arterial bypass (CABG) is more often performed as an emergency procedure in the elderly with the results that both operative mortality and costs are increased over those observed in a younger population. Nevertheless, it is clear that performance of coronary revascularization procedures in the elderly can both prolong life and improve the quality of life beyond what can be achieved using alternative methods of treatment. Greater efforts directed toward detection of ischemic heart disease in the these patients and earlier, elective surgery could significantly reduce both the mortality and disability associated with CAD in the elderly.     

Mechanical properties of moist agglomerates in relation to granulation mechanisms part I. Deformability of moist,densified agglomerates

The mechanical properties of moist samples of fine, polydisperse powders are investigated by measuring the tensile strength by a diametrical compression test and the stress—strain relationship of samples exposed to uniaxial compression. The strengths determined by the two methods correlate well. The strength of moist samples compressed to porosities comparable to the level of intragranular porosities achieved by granulation in high-speed mixers is shown to be influenced significantly by particle interactions in addition to mobile liquid bondings. For a particular material the strength is controlled mainly by porosity and liquid saturation. It is shown that the effect of a growing liquid saturation is to reduce particle interactions and thus to facilitate densification during granulation. The deformability of moist samples, which is dependent on strength and deformation behaviour, is assessed for lactose and dicalcium phosphate.     

Two-Dimensional Whisker Percolation in Ceramic Matrix–Ceramic Whisker Composites

A computer model that treats ceramic-powder matrix–ceramic whisker composites as a percolative network of whiskers has been developed. The model calculates the critical fraction of whiskers at the percolation threshold for a two-dimensional random network of whiskers. The computed critical fraction was found to display an inverse dependence on whisker aspect ratio. In addition, the computed critical fraction (27 vol% for a whisker aspect ratio of 7) agreed well with the zero-shrinkage whisker fraction of 30 vol% in the densification of a colloid-pressed alumina–silicon carbide composite that exhibited a two-dimensional orientation of such whiskers.     

Slips and falls in a cold climate: underfoot surface, footwear design and worker preferences for preventive measures

Slips and falls and associated outdoor injuries are prevalent in cold climates. The objectives of this field investigation were to describe the consequences of slips and falls on ice and snow and the associated injuries, to assess the risks of various icy and snowy surfaces, to identify design needs of footwear, and to ascertain preventive measure preferences of outdoor workers. The organizations investigated were a newspaper delivery service, a military regiment, mining and construction industries. The results showed that fall events occur most frequently on ice covered with snow. This is due to the difficulty of perceiving hidden risks in order to adjust gait strategies. The professional footwear provided does not provide enough protection against slips and falls. Slip resistant properties are ranked as one of the top requirements by the users. Their most preferred preventive measures are footwear with anti-slip properties and the application of anti-slip materials, such as sand or salt.     

Interventional ultrasound in Europe

"Interventional ultrasound," defined as any diagnostic and therapeutic procedure performed under ultrasound guidance was first introduced in Europe, where its early development took place in Vienna, in Copenhagen, in Italy and in Switzerland. However, many of the applications of interventional ultrasound have been based on important pioneer work using other less-suitable needle guiding methods from the pre-ultrasound era. The European contributions to "interventional ultrasound" have especially been in the development of new puncture equipment, in the dissemination of various biopsy techniques, and draining procedures and, more recently, in the development of many different tissue-ablation techniques. The above contributions, which are outlined in this historical review, have, together with significant contributions from the rest of the world-not least from the United States and Japan-created a most efficient diagnostic as well as therapeutic tool for the benefit of our patients.