Magnetic soy protein isolate–bovine serum albumin nanoparticles preparation as a carrier for inulinase immobilisation

Magnetic nanoparticles (NPs) were functionalised with soy protein isolate (SPI) and bovine serum albumin (BSA) for inulinase immobilisation. The results revealed the nanomagnetite size of about 50 nm with a polydispersity index (PDI) of 0.242. The average size of the SPI NPs prepared by using acetone was 80–90 nm (PDI, 0.277), and SPI–BSA NPs was 80–90 nm (PDI, 0.233), and their zeta potential was around −34 mV. The mean diameter of fabricated Fe₃ O₄ @SPI–BSA NPs was <120 nm (PDI, 0.187). Inulinase was covalently immobilised successfully through glutaraldehyde on Fe₃ O₄ @SPI–BSA NPs with 80% enzyme loading. Fourier transform infrared spectra, field emission scanning electron microscopy, and transmission electron microscopy images provided sufficient proof for enzyme immobilisation on the NPs. The immobilised inulinase showed maximal activity at 45°C, which was 5°C higher than the optimum temperature of the free enzyme. Also, the optimum pH of the immobilised enzyme was shifted from 6 to 5.5. Thermal stability of the enzyme was considerably increased to about 43% at 75°C, and K _m value was reduced to 25.4% after immobilisation. The half‐life of the enzyme increased about 5.13‐fold at 75°C as compared with the free form. Immobilised inulinase retained over 80% of its activity after ten cycles.Inspec keywords: magnetic particles, nanoparticles, proteins, molecular biophysics, nanofabrication, enzymes, Fourier transform spectra, infrared spectra, scanning electron microscopy, field emission ion microscopy, transmission electron microscopy, pH, biochemistry, nanobiotechnology, biomagnetism, electrokinetic effects, iron compoundsOther keywords: magnetic nanoparticles, soy protein isolate, bovine serum albumin, inulinase immobilisation, nanomagnetite, polydispersity index, SPI‐BSA NP, zeta potential, inulinase, glutaraldehyde, enzyme loading, Fourier transform infrared spectra, field emission scanning electron microscopy, transmission electron microscopy images, enzyme immobilisation, pH, size 80 nm to 90 nm, temperature 45 degC, temperature 75 degC, Fe₃ O₄      

Improvement of physical and mechanical properties of electrospun poly(lactic acid) nanofibrous structures

Iranian Polymer Journal - The electrospinning of stereocomplexed poly(lactic acid) (Sc-PLA) twisted yarns was our approach to produce PLA-based nanofibrous structures with improved physical and...     

Effect of HNT on the Microstructure,Thermal and Mechanical Properties of Al/FA<Subscript>CS</Subscript>-HNT Composites Produced by GPI

To develop an optimised manufacturing method of fly ash-reinforced metal matrix composites, the preliminary tests were performed on the cenospheres selected from fly ash (FA_CS) with halloysite nanotubes (HNTs) addition. The preform made out of FA_CS with and without the addition of HNT (with 5 and 10 wt.%) has been infiltrated by the pure aluminium (Al) via adapted gas pressure infiltration process. This paper reveals the influence of HNT addition on the microstructure (analysis was done by computed tomography and scanning electron microscopy combined with energy-dispersive x-ray spectroscopy), thermal properties (thermal expansion coefficient, thermal conductivity and specific heat) and the mechanical properties (hardness and compression test) of manufactured composites. The analysis of structure-property relationships for Al/FA_CS-HNT composites produced shows that the addition of 5 wt.% of HNT to FA_CS preform contributes to receiving of the best mechanical and structural properties of investigated composites.     

Wetting Behavior and Reactivity of Molten Silicon with h-BN Substrate at Ultrahigh Temperatures up to 1750 °C

For a successful implementation of newly proposed silicon-based latent heat thermal energy storage systems, proper ceramic materials that could withstand a contact heating with molten silicon at temperatures much higher than its melting point need to be developed. In this regard, a non-wetting behavior and low reactivity are the main criteria determining the applicability of ceramic as a potential crucible material for long-term ultrahigh temperature contact with molten silicon. In this work, the wetting of hexagonal boron nitride (h-BN) by molten silicon was examined for the first time at temperatures up to 1750 °C. For this purpose, the sessile drop technique combined with contact heating procedure under static argon was used. The reactivity in Si/h-BN system under proposed conditions was evaluated by SEM/EDS examinations of the solidified couple. It was demonstrated that increase in temperature improves wetting, and consequently, non-wetting-to-wetting transition takes place at around 1650 °C. The contact angle of 90° ± 5° is maintained at temperatures up to 1750 °C. The results of structural characterization supported by a thermodynamic modeling indicate that the wetting behavior of the Si/h-BN couple during heating to and cooling from ultrahigh temperature of 1750 °C is mainly controlled by the substrate dissolution/reprecipitation mechanism.     

Influence of the molecular weight of chitosan on the spinnability of chitosan/poly(vinyl alcohol) blend nanofibers

The electrospinning of the biopolymer chitosan (CS) and poly(vinyl alcohol) (PVA) was investigated with 90% acetic acid as the solvent and with different CS/PVA ratios. The long chains of high‐molecular‐weight CS prevented it from forming nanofibers in a high‐voltage field. The treatment of CS under high‐temperature alkali conditions reduced its molecular weight exponentially with the treatment time and caused a reduction of the viscosity consequently. PVA, acting as a plasticizer and accompanied by the alkali‐treated CS of lower viscosity, made the electrospinning of CS/PVA blends possible. The effects of the duration of the alkali treatment on the molecular weight of CS and its viscosity were investigated and optimized. The diameter of the bicomponent nanofiber decreased proportionally with the increase in the CS portion, whereas the surface porosity increased inversely. Fourier transform infrared studies illustrated that the alkali treatment or blending of CS with PVA had no effect on its chemical nature. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Intelligent network requirements for personal communicationsservices

It is shown that a moderate set of capabilities within the service switching point (SSP), service control point (SCP), and intelligent peripheral (IP), which are the intelligent network (IN) components directly responsible for the real-time execution and control of end-user services, can engender a wide range of end-user personal communication service (PCS) features. These capabilities could be used as the starting point for an economic analysis of IN implementation costs versus service worth. From a very large target set of call model trigger check points (TCPs), the dozen or so identified in the CCITT Capability Set 1 are shown to be sufficient. The SCP and IP functional entity actions identified are also sufficient to support PCS core network functions     

Hexon-only binding of VP26 reflects differences between the hexon and penton conformations of VP5, the major capsid protein of herpes simplex virus

VP26 is a 12-kDa capsid protein of herpes simplex virus 1. Although VP26 is dispensable for assembly, the native capsid (a T=16 icosahedron) contains 900 copies: six on each of the 150 hexons of VP5 (149 kDa) but none on the 12 VP5 pentons at its vertices. We have investigated this interaction by expressing VP26 in Escherichia coli and studying the properties of the purified protein in solution and its binding to capsids. Circular dichroism spectroscopy reveals that the conformation of purified VP26 consists mainly of beta-sheets (approximately 80%), with a small alpha-helical component (approximately 15%). Its state of association was determined by analytical ultracentrifugation to be a reversible monomer-dimer equilibrium, with a dissociation constant of approximately 2 x 10(-5) M. Bacterially expressed VP26 binds to capsids in the normal amount, as determined by quantitative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cryoelectron microscopy shows that the protein occupies its usual sites on hexons but does not bind to pentons, even when available in 100-fold molar excess. Quasi-equivalence requires that penton VP5 must differ in conformation from hexon VP5: our data show that in mature capsids, this difference is sufficiently pronounced to abrogate its ability to bind VP26.     

Optimal policies for investment and depletion in an oil-rich industrialized economy

There seems to be a tendency to determine the rate of oil extraction independently of the decisions to invest the proceeds of the resource. This paper sets out a general framework whereby the two policy variables can be analysed jointly. The methodology proposed is one of optimal control theory combined with a long-run macroeconomic model. The model presented here is structured with special reference to the UK economy but it can be applied, with the necessary modifications to any industrialized economy, with flexible exchange rate.     

The changing composition of abstracted categories under manipulations of decisional change, choice difficulty, and category size.

The role of decisional factors in category abstraction was investigated. The major prediction was that a change in instructional set would primarily affect the more difficult choices of a category (boundary contraction hypothesis), with this outcome modulated by category size. Subjects classified patterns into three prototype categories until they reached an errorless criterion; then they immediately took a transfer test under a conservative or liberal set. Category size was varied independently of category frequency in Experiment 1; in Experiment 2, category size functioned as a between-subjects variable. The results showed that instructional set affected new, but not old, instances, with this effect additive across choice difficulty and category size. The boundary contraction hypothesis was rejected, and a two-stage model of classification was proposed to account for the results. A compositional analysis revealed that far greater levels of learning may be needed before selective decision making can occur. (PsycINFO Database Record (c) 2010 APA, all rights reserved)