Reactive Compatibilizer Precursors for LDPE/PA6 Blends, 4

Summary: The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamide‐6 (PA) has been studied. The CPs were produced by grafting different amounts of MA or GMA onto a styrene‐block‐(ethylene‐co‐1‐butene)‐block‐styrene copolymer (SEBS) (KRATON G 1652), either in the melt or in solution. A commercially available SEBS‐g‐MA copolymer with 1.7 wt.‐% MA (KRATON FG 1901X) was also used. The effect of the MA concentration and of other characteristics of the SEBS‐g‐MA CPs was also studied. The specific interactions between the CPs and the blends components were investigated through characterizations of the binary LDPE/CP and PA/CP blends, in the whole composition range. It was demonstrated that the SEBS‐g‐GMA copolymers display poor compatibilizing effectiveness due to cross‐linking resulting from reactions of the epoxy rings of these CPs with both the amine and the carboxyl end groups of PA. On the contrary, the compatibilizing efficiency of the MA‐grafted elastomers, as revealed by the thermal properties and the morphology of the compatibilized blends, was shown to be excellent. The results of this study confirm that the anhydride functional groups possess considerably higher efficiency, for the reactive compatibilization of LDPE/PA blends, than those of the ethylene‐acrylic acid and ethylene‐glycidyl methacrylate copolymers investigated in previous works.

SEM micrograph of the 75/25 LD08/PA blend (with 2 phr SEBSMA1).     

High-resolution subunit detection of glutamate receptor by ultrasmall gold nanoparticles

In this study, we aimed to increase the sensitivity of protein labeling using 1.4 nm gold nanoparticles and glutamate δ2 receptor (GluD2) from the postsynaptic membrane of the Purkinje cells. The very small marker size of the particles reduces the steric hindrance between antibodies leading to a higher labeling efficiency of more than one subunit per single receptor molecule. The nanoparticles are visible in 200 kV dark‐field scanning transmission electron microscope on freeze‐fractured carbon replica of nervous tissue after plasma cleaning treatment. The different elemental composition of nanoparticles as Au nanogold or CdS quantum dot can be distinguished by energy dispersive X‐ray spectroscopy. This method ensures detection of an average of three subunits per GluD2 and often labels all four of them with 1.4 nm Au nanoparticles. It is concluded that this high‐resolution microscopic method is useful for exploring the quaternary structure of membrane proteins. Microsc. Res. Tech. 75:1159–1164, 2012. © 2012 Wiley Periodicals, Inc.     

Evaluation of surface/interface quality,microstructure and mechanical properties of hybrid additive-subtractive aluminium parts

A disadvantage of selective laser melting (SLM) processes for the manufacture of large parts is their slow build time per unit volume. A hybrid route is to generate core simple shapes traditionally, for example by machining, followed by adding final features by SLM. Here the mechanical integrity of such hybrid parts is studied, choosing the building of AlSi10Mg by SLM on a machined AA6082 base, in the shape of a tensile test piece, as a simple example. These materials are chosen for their relevance to lightweight parts. As-built parts fail at the SLM/machined interface but standard heat treatments transfer failures to the machined material. Optimised SLM processing conditions and microstructures of the SLM and interfacial regions are reported.     

催化逆流反应器(CH4MIN)技术及其在中国的应用潜力

通过一系列的试验，加拿大矿物与能源技术中心开发出了一项专门处理和利用煤矿矿井乏风中甲烷(甲烷体积浓度0．1％～1．0％)的技术——催化逆流反应器(CH4MIN)技术。CH4MIN技术是在催化剂的作用下，促使乏风混合气体的温度升高到足以让甲烷发生氧化，从而产生热量。通过利用这种热量达到利用乏风中甲烷的目的。本文从CH4MIN技术工作原理、试验结果分析、经济可行性分析及在中国的应用前景作了分析和论述。     

Antibacterial and antifungal activities of selected microalgae and cyanobacteria

In vitro activity of nine cyanobacterial and ten microalgal newly isolated or culture collection strains against eight significant food‐borne pathogens has been evaluated and compared. Water extracts and culture liquids of Gloeocapsa sp. and Synechocystis sp. demonstrated the widest spectrum of activity with minimal inhibitory concentration (MIC) ranging from 1.56 to 12.5 mg mL^?1. Culture liquid of Anabaena sp. had the highest activity (MIC = 0.39 mg mL^?1) but only to Gram‐positive bacteria. Ethanol extracts and fatty acids from all cyanobacteria and microalgae were active against Streptococcus pyogenes and/or Staphylococcus aureus. The fatty acids of Synechocystis sp. inhibited the growth of Bacillus cereus, Escherichia coli and Candida albicans (MIC values of 2.5–1.25 mg mL^?1, respectively). Exopolysaccharides (EPS) of Gloeocapsa sp. were the sample that exhibited activity against all test pathogens with lowest MIC values (0.125–1 mg mL^?1). High activity with a narrower range of susceptible targets demonstrated the exopolysaccharides of Synechocystis sp. and Rhodella reticulata. Antimicrobial activity was proven for phycobiliproteins isolated from Synechocystis sp., Arthrospira fusiformis, Porphyridium aerugineum and Porphyridium cruentum, respectively. In conclusion Gloeocapsa sp. and Synechocystis sp. and especially their exopolysaccharides showed the most promising potential against the examined food pathogens.     

Method for temperature compensation of magnetic elements

With the establishment of a mechanical link between components of materials differing in their respective magneto-elastic properties and temperature indexes of linear distension, mechanical pressures take place, which are functually dependent on temperature. The effect of these pressures on the magnetic properties of magnetic conductors or permanent magnets formed in this manner compensates for the variations of magnetic permeability caused by temperature deviations.     

Numerical solution of a nonsteady extraction problem in the case of nonlinearity of the mass-transfer-coefficient relation

A numerical solution is presented to an extraction problem with a variable masstransfer coefficient and variable concentration of the external medium and a nonlinear condition of equilibrium on the surface of the body.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 47, No. 4, pp. 636–639, October, 1984.