3D television: Developing a multi‐modal multi‐viewer TV system of the future

Abstract— Under the European Union funded Advanced Three‐dimensional Television System Technologies (ATTEST) project, De Montfort University (DMU) is developing a 3D display system targeted specifically at domestic television applications. This system uses a modified transmissive LCD panel together with novel backlighting and optics to project multiple viewing regions, or exit pupils, into the viewing space. These exit pupils are located in space using a head tracker. The display accommodates multiple viewers simultaneously and imposes no physical constraints, such as special eyewear. Viewers may move freely over a “typical” room‐sized area. The design of the backlighting facilitates many other display regimes beyond the “standard” 3DTV mode in which each viewer sees the same image pair.     

The construction and performance of a multiviewer 3‐D television display

Abstract— The De Montfort University (DMU) autostereoscopic 3‐D display, intended for television applications, is described. It provides freedom of viewer movement over a typical “living room” sized area, with no restrictions on viewer's head positions. The display is capable of supplying 3‐D images to multiple viewers who do not need to wear special glasses. It operates by producing regions (exit pupils) in the viewing field where either a left or a right image is perceived. The positions of the exit pupils are steered to the viewers' eyes by the use of head tracking. Design issues that became apparent during the construction of a first prototype, and the findings from tests on it, are described. In addition, the current status of a more advanced prototype is reported.     

Effects of high temperature annealing on the device characteristics of Ga0.52In0.48P/GaAs and Al0.52In0.48P/GaAs heterojunction bipolar transistors

GaInP/GaAs and AlInP/GaAs heterojunction bipolar transistor (HBT) structures were grown by low pressure metalorganic vapor phase epitaxy and annealed at various temperatures up to 675°C for 15 min. Subsequent comparisons with HBTs fabricated on both annealed and unannealed control samples showed no effects for annealing up to and including 575°C, but significant changes in the electrical characteristics were observed at an annealing temperature of 675°C. For the GaInP/GaAs devices, the base current increased by a significant amount, reducing the gain and increasing the base current ideality factor from 1.07 to 1.9. Photoluminescence and electrical measurements on the structures indicated that both the emitter and base were affected by an increase in the recombination times in those regions. These effects were attributed to an out-diffusion of hydrogen from the base during annealing. The emitter of the AlInP/GaAs HBT was affected less by the hydrogen diffusion because of the larger bandgap. These observations have important implications for device performance dependence on the details of the temperature/time profile subsequent to the base growth.     

Experiences with a schematic logic preprocessor

A COBOL preprocessor to implement Michael Jackson's program design language, Schematic Logic, has been written and used in the Computation Department at UMIST. This paper investigates the problems inherent in using preprocessors of this type and details the advantages which accrue from the preprocessor when teaching and using the Jackson Method.     

The role of the gas species on the formation of carbon nanotubes during thermal chemical vapour deposition

In this paper, we investigate the several roles that hydrogen plays in the catalytic growth of carbon nanotubes from the point of view of gas species, catalyst activation and subsequent interaction with the carbon nanotubes. Carbon nanotubes and nanofibres were grown by thermal chemical vapour deposition, using methane and a mixture of hydrogen and helium, for a range of growth temperatures and pre-treatment procedures. Long, straight carbon nanotubes were obtained at 900?°C, and although the growth yield increases with the growth temperature, the growth shifts from nanotubes to nanofibres. By introducing a helium purge as part of the pre-treatment procedure, we change the gas chemistry by altering the hydrogen concentration in the initial reaction stage. This simple change in the process resulted in a clear difference in the yield and the structure of the carbon nanofibres produced. We find that the hydrogen concentration in the initial reaction stage significantly affects the morphology of carbon fibres. Although hydrogen keeps the catalyst activated and increases the yield, it prevents the formation of graphitic nanotubes.     

Controlled growth-reversal of catalytic carbon nanotubes under electron-beam irradiation

The growth of carbon nanotubes from Ni catalysts is reversed and observed in real time in a transmission electron microscope, at room temperature. The Ni catalyst is found to be Ni3C and remains attached to the nanotube throughout the irradiation sequence, indicating that C most likely diffuses on the surface of the catalyst to form nanotubes. We calculate the energy barrier for saturating the Ni3C (2-13) surface with C to be 0.14 eV, thus providing a low-energy surface for the formation of graphene planes.     

High-temperature DC characteristics of AlxGa0.52-xIn0.48P/GaAs heterojunction bipolar transistors grownby metal organic vapor phase epitaxy

A series of Al_xGa_0.52-xIn_0.48P/GaAs heterojunction bipolar transistors (HBT's) with x=0 to x=0.52 showed ideality factors close to unity for both base current and collector current and small variation in gain with temperature up to at least T=623 K across the whole range of x composition. Hole current injection from the base into the emitter in these devices was shown to be negligible. The current gain, β, which is temperature insensitive was thought to be limited by bulk base recombination for x⩽0.3 and recombination at the graded emitter region for x>0.3. The optimum emitter composition (highest β, and good β stability with collector current and temperature) was found to be x=0.18-0.30. Useful transistor action with very high gain and output resistance is possible up to at least T=623 K, limited only by the thermal performance of the unoptimized ohmic contacts employed in the devices     

Preparation and swelling characterization of poly (n‐isopropylacrylamide)‐based porous hydrogels

Nine different poly(n‐isopropylacrylamide)‐based hydrogels, including nonionic, cationic, and anionic hydrogels, were synthesized in with and without the addition of pore‐forming agents. The synthesized hydrogels were characterized with dry gel density measurements, scanning electron microscopy observations, and the determination of the swelling ratio swelling kinetics. All the results showed that the cationic hydrogels had faster swelling kinetics than the anionic and nonionic hydrogels. The addition of pore‐forming agents (NaHCO₃ and carboxymethylcellulose) during the synthesis process led to porous hydrogels with lower dry densities, swelling ratios, and swelling kinetic parameter values. An empirical equation was developed to successfully correlate the swelling kinetic parameter with the hydrogel swelling ratio. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3651–3658, 2004     

A controlled release of antibiotics from calcium phosphate-coated poly(lactic-co-glycolic acid) particles and their in vitro efficacy against Staphylococcus aureus biofilm

Ceramic-polymer hybrid particles, intended for osteomyelitis treatment, were fabricated by preparing poly(lactic-co-glycolic acid) particles through an emulsion solvent evaporation technique, followed by calcium phosphate (CaP) coating via a surface adsorption-nucleation method. The presence of CaP coating on the surface of the particles was confirmed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Subsequently, two antibiotics for treating bone infection, nafcillin (hydrophilic) and levofloxacin (amphiphilic), were loaded into these hybrid particles and their in vitro drug release studies were investigated. The CaP coating was shown to reduce burst release, while providing sustained release of the antibiotics for up to 4 weeks. In vitro bacterial study against Staphylococcus aureus demonstrated the capability of these antibiotic-loaded hybrid particles to inhibit biofilm formation as well as deteriorate established biofilm, making this hybrid system a potential candidate for further investigation for osteomyelitis treatment.     

Toxicity of some non‐metal ions to activated sludge

Abstract

In this paper a more flexible subdivision theorem for nonuniform B‐spline curves is given; this theorem is then used to derive a theorem for the arbitrary subdivision of Bézier curves.