Biodegradable polycaprolactone/cuttlebone scaffold composite using salt leaching process

We prepared biodegradable polycaprolactone/cuttlebone scaffold composite by salt leaching process. In the first step, a co-continuous blend of biodegradable materials, polycaprolactone (PCL) and cuttlebone (CB), and an amount of sodium chloride salt particles were mixed using a stirrer. Next, the extraction of mineral salts using de-ionized distilled water was performed using a biodegradable PCL/CB scaffold with fully interconnected pores. Finally, the durable morphology of the scaffolds was fabricated by freeze-drying process at ?53 °C for 24 hrs in a vacuum. In addition, the quadrilateral pres ranged from about 250 to 300 ??m in diameter. Scanning electron microscopy (SEM) and mercury intrusion porosimeter techniques were carried out to characterize the pore morphology. By increasing the CB and sodium chloride salt particle content, the number of interconnected pores, material properties, and pore morphology were dramatically changed. The average compressive strengths (load at 50% strain) of the different porous PCL/CB scaffolds were found to decrease from 133 to about 79 (load at 50% strain, gf) with an increase in porosity. The values of the porosity increased as the sodium chloride salt volume fraction increased     

Development of cell morphologies in manufacturing flexible polyurethane urea foams as sound absorption materials

The effect of water content and a type of gelling catalysts [Triethylenediamine (DABCO) and dibutyltin dilaurate (DBTDL)] on chemical and physical structures of the flexible polyurethane foams (the flexible PUFs) is explored by a fourier transform infrared spectroscopy with attenuated total reflectance and a scanning electron microscope techniques. The amount of water usage plays a crucial role in controlling the sizes of cavities and pores of the PUFs. From the two gelling catalysts, the DBTDL reduces the rate of urea formation and NCO (isocyanate functional group) conversion due to the reduced molecular activity from the sterically hindered catalyst structure, comparing with the DABCO catalyst case. Strong gelling effect of the DBTDL can prevent the coalescence of the cavities and thus produce high number of well dispersed pores, but poor cavity and pore morphologies are observed in case of the fast reactions between isocyanate and water with the DABCO catalyst. The size uncertainties of cavity and pores with DBTDL catalyst are relatively smaller than with DABCO catalyst. In the sound absorption characteristics, uniformly distributed cavities and pores show better efficiency than the non-uniform cases.     

Effect of Repetitive Lysine-Tryptophan Motifs on the Eukaryotic Membrane

In a previous study, we synthesized a series of peptides containing simple sequence repeats, (KW)_n–NH₂ (n = 2,3,4 and 5) and determined their antimicrobial and hemolytic activities, as well as their mechanism of antimicrobial action. However, (KW)₅ showed undesirable cytotoxicity against RBC cells. In order to identify the mechanisms behind the hemolytic and cytotoxic activities of (KW)₅, we measured the ability of these peptides to induce aggregation of liposomes. In addition, their binding and permeation activities were assessed by Trp fluorescence, calcein leakage and circular dichrorism using artificial phospholipids that mimic eukaryotic liposomes, including phosphatidylcholine (PC), PC/sphingomyelin (SM) (2:1, w/w) and PC/cholesterol (CH) (2:1, w/w). Experiments confirmed that only (KW)₅ induced aggregation of all liposomes; it formed much larger aggregates with PC:CH (2:1, w/w) than with PC or PC:SM (2:1, w/w). Longer peptide (KW)₅, but not (KW)₃ or (KW)₄, strongly bound and partially inserted into PC:CH compared to PC or PC:SM (2:1, w/w). Calcein release experiments showed that (KW)₅ induced calcein leakage from the eukaryotic membrane. Greater calcein leakage was induced by (KW)₅ from PC:CH than from PC:SM (2:1, w/w) or PC, whereas (KW)₄ did not induce calcein leakage from any of the liposomes. Circular dichroism measurements indicated that (KW)₅ showed higher conformational transition compared to (KW)₄ due to peptide-liposome interactions. Taken together, our results suggest that (KW)₅ reasonably mediates the aggregation and permeabilization of eukaryotic membranes, which could in turn explain why (KW)₅ displays efficient hemolytic activity.     

Promising zeolite-type hydrocarbon trap catalyst by a knowledge-based combinatorial approach

Libraries consisting of more than 100 zeolite samples were prepared and examined for developing a promising HC trap catalyst. Parallel adsorptions of toluene onto the catalyst samples were conducted over a 10 × 10 array reactor under dry and wet conditions with or without a heating process three knowledge-based conditions for developing an automotive catalyst during the cold-start period. FAU and BEA type zeolites revealed a high performance of toluene adsorption under the dry condition. However, FAU type zeolite significantly decreased the amount of toluene adsorbed in the presence of water in the feed gas stream, mainly due to the hydrophobicity of the catalyst surface. Over Beta type zeolites, the toluene adsorbed was found to be considerably preserved, even after forced desorption temperature-ramping to the warm-up condition of an automotive engine. Li, K, or Ag ion-exchanged Beta zeolites seem to be particularly promising as an HC trap catalyst.     

KINETICS OF LIQUID PHASE CATALYTIC DEHYDRATION OF METHANOL TO DIMETHYL ETHER

The kinetics of the liquid phase catalytic dehydration of methanol to dimethyl ether were investigated. The experiments were carried out under low concentrations of feed in a 1-L stirred autoclave, according to a statistical experimental design. The inert liquid phase used for this investigation was a 78:22 blend of paraffinic and naphthenic mineral oils. A complete thermodynamic analysis was carried out in order to determine the liquid phase concentrations of the dissolved species. A global kinetic model was developed for the rate of dimethyl ether synthesis in terms of the liquid phase concentration of methanol. The activation energy of the reaction was found to be 18,830 cal/gmol. Based on a step-wise linear regression analysis of the kinetic data, the order of the reaction which gave the best fit was 0.28 with respect to methanol. Effects of the solid to liquid and the gas to liquid mass transfer resistances on the kinetic rate have also been investigated.     

Effects of Heat Treatment on the Microstructures and High Temperature Mechanical Properties of Hypereutectic Al–14Si–Cu–Mg Alloy Manufactured by Liquid Phase Sintering Process

Hypereutectic Al–Si alloy is an aluminum alloy containing at least 12.6 wt.% Si. It is necessary to evenly control the primary Si particle size and distribution in hypereutectic Al–Si alloy. In order to achieve this, there have been attempts to manufacture hypereutectic Al–Si alloy through a liquid phase sintering. This study investigated the microstructures and high temperature mechanical properties of hypereutectic Al–14Si–Cu–Mg alloy manufactured by liquid phase sintering process and changes in them after T6 heat treatment. Microstructural observation identified large amounts of small primary Si particles evenly distributed in the matrix, and small amounts of various precipitation phases were found in grain interiors and grain boundaries. After T6 heat treatment, the primary Si particle size and shape did not change significantly, but the size and distribution of CuAl₂ (θ) and AlCuMgSi (Q) changed. Hardness tests measured 97.36 HV after sintering and 142.5 HV after heat treatment. Compression tests were performed from room temperature to 300 °C. The results represented that yield strength was greater after heat treatment (RT?~?300 °C: 351?~?93 MPa) than after sintering (RT?~?300 °C: 210?~?89 MPa). Fracture surface analysis identified cracks developing mostly along the interface between the primary Si particles and the matrix with some differences among temperature conditions. In addition, brittle fracture mode was found after T6 heat treatment.     

Chlorella vulgaris Attenuates Dermatophagoides Farinae-Induced Atopic Dermatitis-Like Symptoms in NC/Nga Mice

Atopic dermatitis (AD) is a chronic and inflammatory skin disease that can place a significant burden on quality of life for patients. AD most frequently appears under the age of six and although its prevalence is increasing worldwide, therapeutic treatment options are limited. Chlorella vulgaris (CV) is a species of the freshwater green algae genus chlorella, and has been reported to modulate allergy-inducible factors when ingested. Here, we examined the effect of CV supplementation on AD-like symptoms in NC/Nga mice. CV was orally administrated for six weeks while AD-like symptoms were induced via topical application of Dermatophagoides farinae extract (DFE). CV treatment reduced dermatitis scores, epidermal thickness, and skin hydration. Histological analysis also revealed that CV treatment reduced DFE-induced eosinophil and mast cell infiltration into the skin, while analysis of serum chemokine levels indicated that CV treatment downregulated thymus- and activation-regulated chemokine (TARC) and macrophage-derived chemokine (MDC) levels. In addition, CV treatment downregulated mRNA expression levels of IL-4 and IFN-γ. Taken together, these results suggest that CV extract may have potential as a nutraceutical ingredient for the prevention of AD.     

Battery performance of PMMA-grafted PE separators prepared by pre-irradiation grafting technique

Poly(methyl methacrylate)-grafted polyethylene (PE-g-PMMA) separators were prepared by pre-irradiation grafting technique of methyl methacrylate onto a commercial polyethylene separator. The prepared separators were characterized by using charge/discharge (C/D) cycling test, AC impedance, and thermal stability analyses. Thermal shrinkage (TS) of the PE-g-PMMA separators decreased with an increasing degree of grafting up to 70% above which it was saturated. The PE-g-PMMA separators showed a better oxidation stability on the anode up to 5 V and a better cycle life performance than the original PE separator. These characteristics make the prepared separators suitable for applications in high voltage secondary lithium batteries.     

Intralenticular implant study in pigmented rabbits: opacity lensmeter assessment

PURPOSE: To quantitatively analyze the clarity of regenerated lens material after endocapsular lens extraction and restoration of the lens capsular bag with and without implantation of an intralenticular disc lens. SETTING: Shepherd Research Center, Allergan, Irvine, California, USA. METHOD: The clarity of regenerated lens material was evaluated by Interzeag Opacity Lensmeter 701 (OLM) recordings after endocapsular lens extraction in New Zealand/Dutch Belt pigmented rabbits with (n = 21) and without (n = 16) placement of a disc-shaped intralenticular implant in the capsular bag. Postoperative objective measurements were performed at 1, 2, and 3 weeks and 1, 2, 3, and 6 months. Comparisons were made between young and adult rabbits. RESULTS: Mean OLM results were similar in both groups at weeks 1, 2, 3, and 4. After 1 month, progressive central compaction of early irregular regenerated lens fibers was associated with increased OLM readings that were higher in the intralenticular implant group than in the control group. Regenerated lens opacification was greater in tissue posterior to the intralenticular lens than in that anterior to the disc lens. CONCLUSION: Insertion of an intralenticular disc lens into the lens capsule bag was associated with poor optical clarity primarily of the posterior regenerated lens tissue. The OLM was useful in assessing the degree of opacification of the regenerated lenses.