Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Photoinduced Formation of Small Gold Particles in Silica Gels

AuCl⁻₄ ions in sol-gel-derived silica gels (Au/silica gels) were photoreduced by ultraviolet light irradiation at room temperature. In the presence of ethylene glycol in the silica gels, small Au particles were effectively formed by the irradiation. When the storage temperature of the gels was increased in the dark after the irradiation, the surface plas-mon resonance absorption peak of the Au particles was shifted to longer wavelengths, indicating that the Au particles became large. At a storage temperature below 9°C, Au particles could not be observed in the silica gels. The apparent activation energy of Au particle formation was estimated to be 17. 3 kcal·tmol⁻¹.     

2D Image Construction from Low Resolution Response of a New Non‐invasive Measurement for Medical Application

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two‐dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two‐dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home‐based medical care and other situations in which safety, simplicity, and economy are important.     

MITI projects on recycling

MITI has actively done R&D on industrial technology for waste and reclamation and so there are many research items from small scale to large scale. However, Ecofactory and researches on recycling of metallic materials are introduced here. Ecofactory was proposed by the Mechanical Engineering Laboratory and is now at the stage of the Leading Research, a new research scheme in AISt. Researches on recycling of metallic materials are being done with subsidy. Those researches should contribute to both the preservatin of the global environment and effective recycling of waste materials.Abbreviations AIST Agency of Industrial Science and Technology - MITI Ministry of International Trade and Industry - NEDO New Energy and Industrial Technology Development Organization     

Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

Soliton self-frequency shift in orthogonally polarised femtosecondsolitons

The soliton self-frequency shift (SSFS) in orthogonally polarised femtosecond soliton pulses is reported for the first time. It is shown that SSFS for orthogonally polarised solitons is approximately 1/3 of that for parallel polarised solitons. This is attributed to the orthogonal Raman term. The 2π and π dependences of the SSFS on the phase difference between the two solitons are newly obtained for parallel and orthogonal polarisations, respectively. The largest SSFS occurs in-phase under parallel polarisation     

30 GHz pulse train generation from a multiquantum well electroabsorption intensity modulator

Stable optical pulse trains with repetition rates as high as 20-30 GHz have been successfully generated at 1.55 mu m from an InGaAs/InAlAs multiquantum well electroabsorption modulator for the first time.<>     

Temporal integration method for image-processing-basedsuper-high-resolution image acquisition

The authors propose an image processing-based approach towards the development of a super-high-resolution image acquisition system. Imaging methods based on this approach can be classified into two main categories: a spatial integration imaging method and a temporal integration imaging method. With regard to the spatial integration imaging method, the authors have previously presented a method for acquiring an improved-resolution image by integrating multiple images taken simultaneously with multiple different cameras. They develop their work, aiming at a particular class of application where a user indicates a region of interest (ROI) on an observed image in advance, and apply a prototypal temporal integration imaging method. The prototypal temporal integration imaging method does not involve global image segmentation, but uses a subpixel registration algorithm which describes an image warp within the ROI, with subpixel accuracy, as a deformation of quadrilateral patches. The method then performs a subpixel registration by warping an observed image with the warping function recovered from the deformed quadrilateral patches. Experimental simulations demonstrate that the temporal integration imaging is promising as a basic means of high resolution imaging