Drying Kinetics of Oil Palm Frond Particles in an Agitated Fluidized Bed Dryer

The drying kinetics of oil palm frond particles in a laboratory-scale agitated fluidized bed dryer were investigated under various operating conditions: inlet air temperature (50–80°C), superficial air velocity (0.6–1.0 m/s), bed load (200–300 g), and agitation speed (300–500 rpm). To study the effects of these variables on the drying time and drying rate, an experimental design using Taguchi orthogonal array was employed. Based on analysis of variance (ANOVA), the results indicated that inlet air temperature greatly affected the drying rate, followed by superficial air velocity and bed load. The effect of agitation speed on the drying rate was found to be small. The experimental drying kinetics data were compared with the values obtained from three different models, namely, the Page model, modified quasi-stationary method (MQSM), and a new composite model. It was found that the proposed new model could satisfactorily predict the complete drying rate curve for the drying of oil palm fronds.     

Effect of carbon precursor and initial pH on cobalt-doped carbon xerogel for oxygen reduction

In this study, cobalt-doped carbon xerogel (Co-CX) was synthesised via sol-gel polymerisation of phenolic compounds (i.e., resorcinol, phenol and m-cresol) and formaldehyde, and this polymerisation was catalysed by cobalt nitrate and followed by a carbonisation process. The effect of the initial pH value (5.5, 6.5 and 7.5) as well as the type of carbon precursors on the structural properties of Co-CX was investigated via field emission scanning electron microscope (FESEM), Brunauer-Emmett-Teller (BET) and X-ray diffractometry (XRD). The catalytic activity of Co-CX for the oxygen reduction reaction (ORR) in 0.1 M KOH was studied using a rotating ring-disk electrode (RRDE) technique. The structural properties and ORR activities were affected by different initial pH values as well as the type of carbon precursor. A carbon precursor consisting of resorcinol-formaldehyde with an initial pH value of 7.5 exhibited the best catalytic activity. The initial pH plays an important role in promoting micro/mesopores. The FESEM and BET results revealed that Co doping promotes the formation of additional pores. The RRDE result indicated that Co-CX exhibited good catalytic activity that tends to favour a four-electron pathway.     

Fluidization characteristics of oil palm frond particles in agitated bed

Fluidization characteristics of crushed oil palm fronds were studied. The elongated shape of the particles and their fibrous nature created entanglement between the particles and caused the bed to form crack and plug flow when aerated in ordinary fluidized bed. Fluidization of the fibres became feasible with the aid of mechanical agitation. Agitation helped to loosen the entanglement of the fibres which prevents air to pass through the bed of particles, as a result, fluidization state could be attained. Experiments were carried out in a column with height of 72 cm and ID of 14.4 cm. Superficial air velocities used ranged from 0.1 to 1.1 m/s, bed heights ranged from 4 to 8.5 cm, agitation speeds ranged from 300 to 500 rpm and particle initial moisture contents from 0.5 to 2.4 g water/g dry solids. Analysis of the fluidization characteristics showed that minimum fluidization velocity was independent with bed height and agitation speed. However, investigation on the effect of particle initial moisture content showed that minimum fluidization velocity increased with particle moisture content. A new empirical correlation to predict minimum fluidization velocity has been derived which gives good agreement with experimental data in this study and the data from other study in the literature.     

Direct plant tissue analysis and imprint imaging by desorption electrospray ionization mass spectrometry

The ambient mass spectrometry technique, desorption electrospray ionization mass spectrometry (DESI-MS), is applied for the rapid identification and spatially resolved relative quantification of chlorophyll degradation products in complex senescent plant tissue matrixes. Polyfunctionalized nonfluorescent chlorophyll catabolites (NCCs), the "final" products of the chlorophyll degradation pathway, are detected directly from leaf tissues within seconds and structurally characterized by tandem mass spectrometry (MS/MS) and reactive-DESI experiments performed in situ. The sensitivity of DESI-MS analysis of these compounds from degreening leaves is enhanced by the introduction of an imprinting technique. Porous polytetrafluoroethylene (PTFE) is used as a substrate for imprinting the leaves, resulting in increased signal intensities compared with those obtained from direct leaf tissue analysis. This imprinting technique is used further to perform two-dimensional (2D) imaging mass spectrometry by DESI, producing well-resolved images of the spatial distribution of NCCs in senescent leaf tissues.     

Ultrathin 2D‐Layered Cyclodextrin Membranes for High‐ Performance Organic Solvent Nanofiltration

Synthetic membranes with a high selectivity for demanding molecular separations and high permeance have a large potential for the reduction of energy consumption in separation processes. Herein, for the first time, the fabrication of an ultrathin layered macrocycle membrane for molecular separation in organic solvent nanofiltration using per‐6‐amino‐β‐cyclodextrin as a monomer for membrane manufacturing by interfacial polymerization is reported. Compared to a regular nonfunctionalized cyclodextrin, a higher reactivity is observed, enabling a very fast membrane formation under mild conditions. The formed membrane is composed of a layered structure of polymerized cyclodextrin, which shows high stability in different organic solvents. The membrane exhibits excellent separation performance for organic solvent nanofiltration, both with nonpolar and polar solvents. Most importantly, this new membrane type can discriminate between molecules with nearly identical molecular weights but different shapes. The unmatched high permeance and shape selectivity of the membranes can be attributed to the ultralow thickness, controlled microporosity, as well as the layered macrocycle structure, which makes the membranes promising for high‐performance molecular separation in the chemical and biochemistry industry.     

A Desorption Electrospray Ionization Mass Spectrometry Study of Aging Products of Diphenylamine Stabilizer in Double‐Base Propellants

Double‐base propellants consisting of nitrocellulose, nitroglycerin and stabilizer undergo chemical and physical changes upon aging, leading to changes in ballistic power and presenting explosive hazards. During aging, PTFE seals of the glass ampoules used in the aging studies undergo a yellow discoloration. This report studies the discoloration of the liners using desorption electrospray ionization (DESI), a gentle surface analysis technique based on electrospray ionization. The color bodies in the PTFE liners were identified by DESI together with tandem mass spectrometry to be the nitrated derivatives of the diphenylamine stabilizer: dinitro‐, trinitro‐, and tetranitrodiphenylamine. While increased nitration decreases vapor pressure of the DPA species, an increase in solubility in the PTFE liners occurs. This may account for these species not previously being observed during early aging studies as they are preferentially absorbed into the liners, which were not extracted prior to high performance liquid‐ chromatography analysis.     

Mass spectrometry imaging under ambient conditions

Mass spectrometry imaging (MSI) has emerged as an important tool in the last decade and it is beginning to show potential to provide new information in many fields owing to its unique ability to acquire molecularly specific images and to provide multiplexed information, without the need for labeling or staining. In MSI, the chemical identity of molecules present on a surface is investigated as a function of spatial distribution. In addition to now standard methods involving MSI in vacuum, recently developed ambient ionization techniques allow MSI to be performed under atmospheric pressure on untreated samples outside the mass spectrometer. Here we review recent developments and applications of MSI emphasizing the ambient ionization techniques of desorption electrospray ionization (DESI), laser ablation electrospray ionization (LAESI), probe electrospray ionization (PESI), desorption atmospheric pressure photoionization (DAPPI), femtosecond laser desorption ionization (fs‐LDI), laser electrospray mass spectrometry (LEMS), infrared laser ablation metastable‐induced chemical ionization (IR‐LAMICI), liquid microjunction surface sampling probe mass spectrometry (LMJ‐SSP MS), nanospray desorption electrospray ionization (nano‐DESI), and plasma sources such as the low temperature plasma (LTP) probe and laser ablation coupled to flowing atmospheric‐pressure afterglow (LA‐FAPA). Included are discussions of some of the features of ambient MSI for example the ability to implement chemical reactions with the goal of providing high abundance ions characteristic of specific compounds of interest and the use of tandem mass spectrometry to either map the distribution of targeted molecules with high specificity or to provide additional MS information on the structural identification of compounds. We also describe the role of bioinformatics in acquiring and interpreting the chemical and spatial information obtained through MSI, especially in biological applications for tissue diagnostic purposes. Finally, we discuss the challenges in ambient MSI and include perspectives on the future of the field. © 2012 Wiley Periodicals, Inc., Mass Spec Rev 32:218–243, 2013     

Characteristics of raw starch degrading α‐amylase from Bacillus aquimaris MKSC 6.2 associated with soft coral Sinularia sp.

Partially purified α‐amylase from Bacillus aquimaris MKSC 6.2, a bacterium isolated from a soft coral Sinularia sp., Merak Kecil Island, West Java, Indonesia, showed an ability to degrade raw corn, rice, sago, cassava, and potato starches with adsorption percentage in the range of 65–93%. Corn has the highest degree of hydrolysis followed by cassaca, sago potato and rice, consecutively. The end products of starch hydrolysis were a mixture of maltose, maltotriose, maltotetraose, maltopentaose, maltohexaose, and small amount of glucose.