Quantification of cell adhesion force with AFM: distribution of vitronectin receptors on a living MC3T3-E1 cell

Distribution of vitronectin (VN) receptors on a living murine osteoblastic cell was successfully measured by atomic force microscopy (AFM). First, the distribution of the integrin beta(5) subunit which constitutes a part of the VN receptor on the cell was confirmed by conventional immunohistochemistry after fixing the cell. To visualize the distribution of the receptor on a living cell by an independent and potentially a more quantitative method, the AFM was used with a microbead attached to the cantilever tip to increase the area of contact and VN was immobilized on the microbead. Force measurements were then performed over a large area of a living murine osteoblastic cell using the microbead covered with VN.     

Surgical therapy for hepatocellular carcinoma with liver cirrhosis

Approximately 80% of hepatocellular carcinoma (HCC) patients in Japan have associated liver cirrhosis, which increases the difficulty of surgical treatment. Liver dysfunction associated with liver cirrhosis is one of the most important predictive prognostic factors for HCC patients. Percutaneous ethanol injection therapy (PEIT) is useful for patients with small HCC or with poor hepatic functional reserve. Transcatheter arterial chemoembolization (TACE) is also useful both for patients with unresectable HCC and patients with multiple intrahepatic recurrence. Liver resection, however, lead to better outcome than other treatments when liver function is maintained after surgery. To determine operative procedures, it is important to evaluate the exact function of remnant liver, based on the preoperative liver function test and the evaluation of tumor character. For advanced HCC patients with vascular invasion, non-surgical treatments such as PEIT or TACE are not indicated, and surgical intervention can be an effective modality to improve their survival. Improvements of surgical technique and perioperative management have decreased fatal complications at a major liver resection and allowed us to carry out liver resection on patients with advanced HCC.     

Morphology,Electrical, and Rheological Properties of Silane‐Modified Silver Nanowire/Polymer Composites

Electrically conducting films containing AgNws, hydrophilic and hydrophobic resins were prepared. FT‐IR reveals that the interface between the AgNws and epoxy could be successfully modified by APTES. XPS shows that the AgNws were attracted by hydrogen bonds of ? NH₂ and ? NH? groups after APTES modification. SEM analysis shows that the AgNws were well dispersed in the resin. The AgNws were also blended with hydrophilic and acrylic resins, and the resulting blends were compared with AgNws/epoxy blends. Results show that AgNw/PVA‐resin films possess the lowest surface electrical resistance. The AgNw/PVA‐resin and silane‐modified AgNw/epoxy resin conductive films possess a similar electrical percolation threshold.

     

Hexane Isomerization over Hierarchical Pt/MFI Zeolite

The contribution focuses on the pore structure of mesoporous MFI and its catalytic properties in hexane isomerization. Base post treatment creates defected pore channels in MFI structure, thus enhances catalytic activity and unprecedentedly high dimethylbutane (DMB) yield far beyond shape selectivity restrictions. On the other hand, re-crystallization post synthesis method forms a MFI/MCM-41 composite with MFI zeolite aggregates homogeneously supported inside MCM-41 channel and has the same global activity as MFI zeolite but having higher 23DMB product selectivity. The pore structures of both post treated MFI zeolite are elucidated from the changes in the product selectivity and sorption measurements.     

Dynamic transmission torque of a flexible multiple-disc clutch and brake to intermittent loads

This paper is concerned with a transmission torque of a flexible multiple-disc clutch subjected to dynamic loads. The analysis has been developed on the problem of the clutch subjected to a dynamic load which varies as a half-rectified sine function with time. In the analysis, the elastodynamic theory of a circular plate has been extended to this problem by application of the Laplace transform method. The dynamic pressures and the reaction forces along the edge between discs have been obtained from the conditions of continuity between discs, and from which the transmission torque of the clutch has been concluded. Numerical results of the transmission torque versus time and the deflections and bending moments in the clutch have been given for some important cases     

Quantitative analysis of the number of antigens immobilized on a glass surface by AFM

To develop force measurements using an atomic force microscope (AFM) in a quantitative manner, it is necessary to estimate the number density of target molecules on a sample surface, and for this, the sensitivity of detection should be known. In this study, the AFM was used as a mechanical detector and an antigen and its antibody were used as a model to evaluate the sensitivity of detection. Antigens were immobilized on a glass surface and number density was estimated by monitoring optical absorbance due to product formation by the reaction of crosslinkers. The concentration of antigen was controlled by mixing control peptides. A microbead was used as a probe and antibodies were immobilized on the bead. AFM force measurements were then made for a range of number densities in the order of 10–10⁶ antigen molecules per square micrometer of surface and were compared to evaluate the sensitivity of detection. Our result establishes the reliability of estimating a number of molecules like receptors on the cell surface, and indicates that the AFM is useful as a mechanical detector with high sensitivity.     

Quantitative measurement of mRNA at different loci within an individual living cell

Asymmetric localizations of cellular proteins and mRNAs are important for cell functions such as division, differentiation and development. The localization of specific mRNA generates cell polarity by controlling the translation sites of specific proteins and thereby restricting their locations to appropriate cellular regions. We have previously reported a novel method based on atomic force microscopy (AFM) for examining gene expression in a single living cell without killing or destroying it. An AFM tip was inserted into a living cell to extract mRNAs, which were analyzed after multiplication by RT-PCR and quantitative PCR. By applying this method, in this study we performed quantitative measurement of mRNA at different loci within individual living cells.     

Thrust bearing using a magnetic fluid lubricant under magnetic fields

This paper describes a thrust bearing using a magnetic fluid lubricant under a magnetic field. The critical pressures of the bearing versus the magnitude of the magnetic flux densities have been investigated experimentally. It is shown that the critical pressures of the proposed bearing are larger than those of the normal lubricated bearing under high speeds.     

Atomic force microscopy of histological sections using a new electron beam etching method

In order to examine histological sections of the rat vomeronasal epithelium with the atomic force microscope (AFM), we developed an electron beam etching method that improves the resolution of AFM images. This method results in AFM images comparable to those obtained with the transmission electron microscope (TEM). Ultrathin tissue sections embedded in epoxy resin were observed before and after the treatment with electron beam radiation. Before electron beam treatment, epithelial structures such as the microvilli surface, dendritic processes, the supporting cell layers and the neuronal cell layers were all visible using the AFM. However, only a few subcellular structures could also be resolved. The AFM images were not as clear as those obtained with the TEM. After electron beam treatment, however, the resolution of AFM images was greatly improved. Most of the subcellular structures observed in TEM images, including the inner membrane of mitochondria, ciliary-structure precursor body, junctional complexes between the neurons and supporting cells, and individual microvilli were now visible in the AFM images. The electron beam treatment appeared to melt the embedding resin, bringing subcellular structures into high relief. The result of this study suggests that electron beam etching of histological samples may provide a new method for the study of subcellular structure using the AFM.     

High-sensitivity detection of proteins using gel electrophoresis and atomic force microscopy

We have developed a method to detect specific proteins with a high sensitivity using a gel electrophoresis method and force measurement of atomic force microscopy (AFM). Biotinylated proteins were separated by electrophoresis and fixed with cross-linking chemicals on the gel, followed by direct force measurement between the biotinylated proteins on the gel and a streptavidin-modified tip of an AFM cantilever. We were able to achieve a high enough sensitivity to detect the picogram order of the biotinylated proteins by evaluating the frequency of the interaction force larger than 100 pN in the force profile, which corresponds to the rupture force of interaction between streptavidin and biotin.