Surface characterization and catalytic properties of La1−x -Sr x CoO3

The surface chemical states of the perovskite-type compounds, strontium doped lanthanum cobalt oxides (La_1?x Sr _x CoO₃), have been investigated using X-ray photoelectron spectroscopy (XPS). Catalytic oxidations of both methane and CO have also been investigated using flow methods. The chemical composition of the surface of La_1?x Sr _x CoO₃ was very different from that in the bulk, which was measured by X-ray fluorescence spectroscopy (XRFS). The catalytic activity of La_1?x Sr _x CoO₃ increased with an increase in the quantity of cobalt atoms on the surface.     

Far-Infrared Reflection Spectra of Dielectric Ceramics for Microwave Applications

Far-infrared reflection spectra of dielectric ceramics, BaSm₂Ti₅O₁₄, BaTi₄O₉, and some pcrovskites such as Ba(Zn_1/3Nb_2/3)O₃, have been measured at room temperature using a Fourier transform infrared spectrometer in order to investigate the effect of the crystal structure on the dielectric properties. As for perovskites, Sr(Zn_1/3Nb_2/3)O₃ and Sr(Mg_1/3Nb_2/3)O₃, in which B site ions are ordered, were also measured. Reflectance data were analyzed by means of a factorized form of dielectric functions instead of the classical dispersion theory, and all of the spectra were well fitted. The values of dielectric constants and tan δ calculated from the reflectance data were in good agreement with resonant cavity measurements at 5 GHz. Furthermore, results of this study have shown that the main contribution to the microwave dielectric properties is caused by low-frequency optically active modes located at 50 to about 300 cm⁻¹, and for perovskite structures it is suggested that the ordering of B site ions is significant in obtaining low dielectric losses.     

A reconfigurable VLSI-based double-lens tracking camera

Watching and tracking an object while seeing a much wider view is one of advantages of the eye system. We proposed and developed a tracking camera system that mimics the eyes by using double-lens modules. In the system, a wide view is captured through the wide-lens module, while the target in it is tracked and magnified through the telescopic lens module. Electronic circuits for tracking control are implemented onto the reconfigurable VLSI or FPGA in order to embed the parallelism in the tracking algorithm into the hardware. A successfully developed FPGA-based prototype performs high-speed tracking at the video-rate. This work was present in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

连铸中间包内三维湍流流动的数值模拟

连铸中间包的操作条件决定了其内流动现象的复杂性，为此，本文选择两种不同的湍流模型ｋ－ε和ＬＥＳ（Ｌａｒｇｅｅｄｄｙｓｉｍｕｌａｔｉｏｎ），建立了描述连铸中间包内三维湍流流动的数学模型，并实施了数值计算和模型验证，对单流中间包内的流动现象进行了描述，考察了有，无流动控制情况下中间包内的流动特征和湍流模型的合理性，结果表明，合理的流动控制有利于中间包内非金属夹杂的上浮和吸附，用ｋ－ε模型基本上能够描述     

Influence of activated carbon pore structure on oxygen reduction at catalyst layers supported on rotating disk electrodes

Carbon materials are often used as catalyst supports, and for catalysts in electrodes of a polymer electrolyte fuel cell, carbon black has been used. Recently, it was found, however, that activated carbon could replace carbon black and besides, significantly improve the activity of the electrode catalyst layer for oxygen reduction. In the present study, to optimize the pore structure of activated carbon for further activity improvement, the influence of the pore structure on the activity was investigated using activated carbon of various specific surface areas and mean pore diameters. A catalyst layer was formed from activated carbon loaded with platinum and a polymer electrolyte. The activity of the layer was measured in an oxygen-saturated perchloric acid solution, supporting the layer on a rotating glassy carbon disk electrode. We found that increases in the specific surface area and mean pore diameter increased the activity and that the latter was more effective than the former mainly due to the enhanced mass-transfer in the pores; the catalyst layer formed from activated carbon with the largest mean pore diameter was the most active. Unless pores excessively develop and lose connections between particles, a large pore diameter is therefore desired for the fuel cell electrodes.     

Fatigue behavior of medium-density polyethylene pipes

A round bar specimen and a square bar specimen cut out from medium-density polyethylene pipes with a notch were made and a fatigue test was conducted to cause a brittle fracture. The initiation and growth of a craze and crack at the tip of a notch was observed. In the range where loading cycles are few and displacement of the specimen does not increase, the craze prior to crack initiation occurs. Also, the effect of frequency was investigated. The pure creep failure and the fatigue failure at low frequency were compared. The lower the frequency, the smaller the reciprocal of the actual loading time T_f becomes. It is also found that this tensile fatigue test is a useful test method to assure the quality of pipes.     

Internal fracture of notched epoxy resins

The brittle fracture of round-notched epoxy resin bars subjected to plane strain bending has been studied at varying strain rates. Observations of fracture processes and surface morphologies revealed that the internal crack was nucleated at the plastic-elastic boundary when the plastic deformation zone at the notch root reached a certain size. A slip-line field theory allows calculation of the stress components at the plastic-elastic boundary from a knowledge of the location of the internal crack. An analysis of the data concluded that the triaxial stress level ahead of the plastic zone was raised by plastic constraints to an ideal fracture stress which is considerably larger than that of glassy thermoplastics.     

Current steel forgings and their properties for steam generator of nuclear power plant

Current steel forgings used for the construction of steam generators (SGs) for a nuclear power plant (NPP) were introduced from the following three (3) features. (1) Integral type steel forgings such as (i) primary head integrated with nozzles, manways and supports, (ii) steam drum head integrated with nozzle and handhole, (iii) conical shell integrated with cylindrical sections and handholes, have been developed to enhance the structural integrity of the component and to make fabrication and inspection including in-service inspection easier. (2) The high strength steel such as SA508 Cl.3a has been adopted to decrease the weight of components, resulting in enhancement of aseismatic properties of SG. (3) Low Si SA508 Cl.3 steel with the addition of Al was investigated and was applied to a heavy thick tube sheet forging, to minimize the macro- and micro-segregations in the ingot.     

Application of ergothioneine-rich extract from an edible mushroom Flammulina velutipes for melanosis prevention in shrimp,Penaeus monodon and Litopenaeus vannamei

This report investigated the melanosis-inhibiting properties of crude water soluble extract from the base and fruiting body waste of an edible mushroom (Flammulina velutipes) containing 9.13 ± 2.03 mg/mL 2-thiol-l-histidine-betaine (ergothioneine, ESH). Immersion of live full-grown black tiger shrimp (Penaeus monodon) and Pacific white shrimp (Litopenaeus vannamei) in a 0.5% w/v solution of mushroom extract for 1 h significantly decreased polyphenoloxidase (PPO) activity in shrimp hemolymph and expression of the prophenoloxidase (proPO) gene in hemocytes. Consequently, the development of melanosis in the treated shrimp during ice storage was prevented. Treatment with a 0.05% w/v solution of sodium sulfite and 4-hexyl-1,3-benzenediol had a similar effect. Enzyme assays showed that ESH is a non-competitive inhibitor. It is proposed that ESH possibly interacts directly with Cu²⁺ at the putative binding sites of PPO and proPO, based on copper-chelating activity analyses, thus preventing melanosis in the shrimp. This study indicated that application of ESH-rich F. velutipes mushroom extract from trimming waste is an effective natural alternative to synthetic melanosis-inhibiting agents to prevent postmortem melanosis in shrimp.     

Lessons from Earthquakes in Recent Times and their Effects on the Development of Geotechnology

This paper first reviews the earthquakes that occurred since 1995 and then outlines the significant lessons learnt from disasters. The discussion then goes into the induced development of engineering practices that were triggered by those disasters. It is clear that major development occurred in design philosophies, soil improvement, and facilities for research. The last section of this paper addresses the compound effects of earthquakes and rainfall that may make the extent of the disasters worse.