The anodic dissolution of copper during electrorefining has been studied by a rotating ring-disc electrode technique. The influence of temperature, some additives (Cl– ions and polyethylene glycol) and the anode-alloying element (phosphorus) on the polarization curves was examined. It was shown that at certain conditions the concentration of Cu+ ions on the ring electrode decreased. As a result, a reduction of powdered copper in the electrolyte due to the disproportionation of cuprous ions may be expected. 相似文献
Dynamic range of the scene can be significantly wider than the dynamic range of an image because of limitations of A/D conversion. In such a situation, numerous details of the scene cannot be adequately shown on the image. Standard industrial digital cameras are equipped with an auto-exposure function that automatically sets both the aperture value and cameras exposure time. When measuring a scene with atypical distribution of light and dark elements, the indicated auto-exposure time may not be optimal. The aim of work was to improve, with minimal cost, the performance of standard industrial digital cameras. We propose a low complexity method for creating HDR-like image using three images captured with different exposure times. The proposed method consists of three algorithms: (1) algorithm for estimating whether the auto-exposure time is optimal, (2) algorithm which determines exposure times for two additional images (one with shorter and another with longer than auto-exposure time), and (3) algorithm for HDR-like imaging based on fusion of three previously obtained images. Method is implemented on FPGA inserted into standard industrial digital camera. Results show that the proposed approach produces high quality HDR-like scene-mapped 8-bit images with minimal computational cost. All improvements may be noticed through the performance evaluation.
Objective: The purpose of this study was to investigate and quantify flow properties, compressibility, and compactibility of various pharmaceutical lactose powders found on the market today (DCL-11, DCL-21, M‐200, Flowlac-100, and Tablettose 70, 80, and 100). Methods: Flow properties were estimated by measuring flow time, angle of repose, and the Hausner ratio. Particle rearrangement was studied using Kawakita's linear model. Compressibility was studied using two ‘out-of-die’ methods: (i) the Heckel model and (ii) a modified Walker model. Compactibility was quantified using two methods: (i) the tensile strength profile (Cp) and (ii) the compactibility factor (Pr). Statistical approach was used to analyze the results. Results: Flow properties of all materials were passable or better, except for M-200, which has very poor flowability. Compressibility results demonstrated that the most compressible lactose is spray-dried grade of lactose (Flowlac-100) and the least compressible is milled lactose (M-200). Compactibility studies showed that β‐lactose (DCL-21) forms tablets with superior tensile strength in comparison with α-lactose. Conclusion: Results of the compressibility study showed that the discriminative power of modified Walker model is greater in comparison with Heckel model. Compactibility methods yield similar and comparable results. 相似文献
In the present work, the catalytic activity of electrodeposited Co–Mn–B nanocomposites towards controllable hydrolysis of
sodium borohydride was studied. Deposition was performed on two types of Ni-foam (RECEMAT Int.) with different pore size,
specific surface area and thickness. Higher deposit loading, as well as bigger real surface area, was obtained with foam samples
possessing bigger pore size. The catalyst deposited on bigger pore foam promoted hydrogen generation with higher rates than
the other one when contacted with a base-stabilized NaBH4 solution. The same activation energy value, however, was determined for both supported catalysts. On the base of the obtained
results, it may be concluded that the geometric factor plays predominant role for the catalytic activity of studied catalysts. 相似文献
Rich information spaces (like the Web or scientific publications) are full of “stories”: sets of statements that evolve over
time, manifested as, for example, collections of news articles reporting events that relate to an evolving crime investigation,
sets of news articles and blog posts accompanying the development of a political election campaign, or sequences of scientific
papers on a topic. In this paper, we formulate the problem of discovering such stories as Evolutionary Theme Pattern Discovery,
Summary and Exploration (ETP3). We propose a method and a visualisation tool for solving ETP3 by understanding, searching
and interacting with such stories and their underlying documents. In contrast to existing approaches, our method concentrates
on relational information and on local patterns rather than on the occurrence of individual concepts and global models. In addition, it relies on interactive graphs
rather than natural language as the abstracted story representations. Furthermore, we present an evaluation framework. Two
real-life case studies are used to illustrate and evaluate the method and tool. 相似文献
Hydrogen evolution during zinc electrodeposition on a steel substrate from zincate electrolytes containing different additives was studied using various experimental techniques.The hydrogen evolution reaction is limited by the electron transfer step. Hydrogen evolution is most intensive during the first seconds from the beginning of electrodeposition due to the lower overpotential of hydrogen on steel as compared with that on zinc. The evolved hydrogen is dissipated in three ways. Most is dissipated to the atmosphere via gas bubbles at a constant rate. Some is dispersed in the electrolyte some diffuses into the steel substrate, predominantly at the commencement of deposition. The additives affect both the total amount of evolved hydrogen and its distribution. The highest amount of hydrogen is evolved in the presence of the anisaldehyde bisulphite containing composite additive. The highest amount of hydrogen included in the substrate and remaining in the electrolyte corresponds to the use of the Na–N-benzylnicotinate containing additive. In this case blistering is observed. 相似文献
Zusammenfassung Die Berechnung der Fläche wurde angegeben, die die Lösung einer homogenen linearen Differentialgleichung beliebiger Ordnung, die eine stabile Bewegung darstellt, im Zeitintervale vont=0 bist= umschreibt. Danach ist an zwei behandelten Beispielen, die meistens bei der Schnellregelung vorkommen, gezeigt, wie diese Fläche nach einer sehr einfachen Gleichung zu bestimmen ist. Durch Vergleich der oszillographisch aufgenommenen Abweichungsflächen eines in Betrieb befindlichen Reglers kann man entweder einige Konstanten der Regelung ermitteln oder eine Rechnungskontrolle durchführen. Die Fläche kann weiterhin als ein Hilfsbegriff zu den theoretischen Untersuchungen auf dem Gebiete der Schnellregelung von Nutzen sein. 相似文献
Several types of nanostructured hybrid fibrous materials containing poly(3-hydroxybutyrate), nanoparticles from iron oxide (Fe3O4) and titanium dioxide (TiO2), and chitosan or chitosan oligosaccharides (COS) were prepared. The design of the surface of the materials and their magnetic properties were tailored purposefully by conjunction of electrospinning and electrospraying. The surface and bulk morphologies of the obtained nanostructured materials were examined by SEM. Further, the distribution of Fe3O4 and TiO2 nanoparticles was estimated by TEM analyses, as well as their surface chemical composition was determined by XPS. It was found that the simultaneous electrospinning and electrospraying of Fe3O4/chitosan or TiO2/COS dispersions resulted in uniform distribution of the nanoparticles along the length of the fibers, while electrospraying of the mixed Fe3O4/TiO2/chitosan dispersion led to agglomerate formation. Furthermore, the nanostructured hybrid materials preserved the magnetic properties of Fe3O4 embedded therein. It was demonstrated that the hybrid materials of different designs displayed excellent photocatalytic activity under UV light irradiation against a model organic contaminant—methylene blue, even after threefold use of the materials. 相似文献
Objective: The aim of this study was to investigate the influence of process parameters, binder content and binder addition method on characteristics of the granules obtained by melt granulation (MG) in fluidized bed.Methods: Spray-on experiments were performed according to 23 full factorial design. The effect of binder content, molten binder feed rate, and spray air pressure on granule size and size distribution, granule shape, ?owability and drug release rate was investigated. In the in situ experiments, the influence of binder particle size and binder content was evaluated. Solid-state characterization was performed by means of differential scanning calorimetry, X-ray powder diffraction and Fourier transform infrared spectroscopy.Results: Size of the granules obtained by spray-on procedure was significantly influenced by binder content and spray air pressure, while the width of particle size distribution was mainly affected by binder feed rate. Spray air pressure showed the most significant influence on granule shape. It was shown that smooth and spherical particles with good flow properties may be obtained by both procedures, spray-on and in situ MG. The results obtained indicated the influence of agglomeration mechanism on granule sphericity, with higher degree of granule sphericity observed when immersion and layering was the dominant mechanism. Paracetamol release from granulates was very rapid, but after compression of the granules into tablets, drug release was considerably slower. Solid-state analysis confirmed that the physical form of the granulate components remained unaffected after the MG process.Conclusion: The results presented indicate that MG in fluidized bed could be a good alternative to conventional granulation techniques. 相似文献