Lateral stiffness of steel plate shear wall systems

The accuracy of the finite element method and strip method of analysis for calculating the lateral stiffness of steel plate shear wall (SPSW) systems is assessed by making comparisons with experimental findings. Comparisons revealed that while both methods provide acceptable accuracy, they also require the generation of sophisticated computer models. In this paper, two alternative methods are developed. The first one is an approximate hand method based on the deep beam theory. The classical deep beam theory is modified in the light of parametric studies performed on restrained thin plates under pure shear and pure bending. The second one is a computer method based on the truss analogy. Stiffness predictions using the two alternative methods are found to compare well with the experimental findings. In addition, lateral stiffness predictions of the alternate methods are compared against the solutions provided using finite element and strip methods of analysis for a class of test structures. These comparisons reveal that the developed methods provide estimates with acceptable accuracy and are simpler than the traditional analysis techniques.     

The effect of contact pad hardness on the fretting fatigue behaviour of AZ61 magnesium alloy

In the present study, the effect of hardness of contact material on fretting fatigue strength was experimentally investigated as a function of stress ratio. AZ61 magnesium alloy used in defense and transportation industries was used as the material for both the specimen and the contact pad. Two levels of hardness of contact material, 55.3 Vickers Hardness (HV) and 83.3 HV, were prepared by heat treatments. According to the results, with increasing hardness, the fretting fatigue strength decreased. The relative slip amplitude increased with increasing hardness, while the tangential force amplitude was not influenced by the hardness. It was speculated that because the local tangential stress at the contact edge increases with increasing hardness, the fretting fatigue strength decreases with increasing hardness.     

Thoracic outlet compression syndrome caused by a schwannoma of the C7 nerve root

This is the first report of a schwannoma originating from the C7 nerve root causing thoracic outlet compression syndrome. The patient was a 30-year-old woman with a 3-year history of numbness on the radial side of the left hand, left arm tiredness, nocturnal pain in the left forearm and pain in the left elbow, shoulder and neck. Conservative treatment and previous operations, including carpal tunnel release and first rib resection, provided no relief. A left scalenectomy was performed. During the removal of the anterior scalene muscle, a mass approximately 3 cm long and 1.5 cm in diameter was noted under the anterior scalene muscle involving the C7 nerve root. The tumour was encapsulated and covered with attenuated and stretched nerve fascicles. It was completely excised without disturbing the nerve fascicles. The clinical impression was schwannoma, which was confirmed on pathological examination.     

Prediction of (n,3He) cross-sections around 14 MeV

A comprehensive review of the neutron-induced cross-sections for (n,³He) reactions has been made for the interval of 14⩽Z⩽84 around 14 MeV neutron energy. For practical purposes, an empirical expression has been found by using the experimental (n,³ He) cross section values as a function of (N-Z) and (E_n-E_th) where (N-Z) is the neutron excess of the target nucleus, E_n and E_th are the incident neutron energy and the (n,³He) threshold energy, respectively. The derived empirical relation gives a good fit with the experimental values     

The nitriding of Fe-V alloys

Fe-V alloys containing 1.06 wt pct V, 5.23 wt pct V and 15.55 wt pct V, have been nitrided in purified NH₃ gas in temperatures ranging between 773 K and 1173 K. The nitriding kinetics of all these alloys in this temperature range obey a parabolic rate law. The comparison of the nitriding rate constants evaluated from experimental results and from the calculations based on Wagner's internal oxidation model show a deviation which is explained in terms of the effect of the lattice strains on the solubility and diffusivity of nitrogen in the Fe matrix. The hardness of the nitrided zone increases with the vanadium content in solution and reaches a saturation value of about 1300 VHN (12.75 GNm⁻²) which corresponds to about 4 wt pct V. The hardening in the nitrided region is cuased by the precipitation of VN which cannot be observed on specimens nitrided at the lower limits of the temperature range. Precipitates grown in size can be seen on specimens nitrided at 1073 K and 1173 K.     

Spatial inhomogeneity in poly(acrylic acid) hydrogels

The crosslink density distribution in gels known as the spatial gel inhomogeneity has been investigated in poly(acrylic acid) (PAAc) gels with the static light scattering measurements. PAAc gels were prepared at a fixed chemical crosslink density but at various initial monomer concentrations. The gels were characterized by swelling and elasticity tests as well as by light scattering measurements. PAAc gels exhibit a maximum degree of spatial inhomogeneity at a critical monomer concentration . shifts toward higher concentrations as the gel swells beyond its dilution degree after preparation. Depending on the polymer concentration in gels, swelling reduces or enhances the extent of the spatial inhomogeneities. It was shown that the apparent degree of the spatial gel inhomogeneity is determined by the combination of three effects, namely the effects of the effective crosslink density, charge density and segment density. The relative magnitudes of these effects vary depending on the polymer concentration and lead to the appearance of a maximum degree of spatial inhomogeneity at a critical concentration.     

The cross thumb to index finger pedicle

By careful technique the dorsum of the thumb can be used as a donor area to cover exposed bone of index fingertip amputations and, in certain cases, avulsions of the nailbed. In this procedure an oblique, radially based flap from the dorsum of the proximal phalanx is used.