The effect of structural features on mechanical properties of loose optical fiber poly(butylene terephthalate) tubes

Results of a study on the modifying mechanical properties of loose optical‐fiber poly(butylene terephthalate) (PBT) tubes, produced during the standard industrial extrusion process, show that heat treatment make the structure of their material to change. The study comprised measurements of mechanical strengths properties of the tubes (tensile strength, compression strength, kinking) and determination of tube material structure [by differential thermal analysis (DTA), wide angle X‐ray scattering analysis (WAXD), and scanning electron microscopy (SEM)]. Results of the study allowed observation that the annealing at 70°C for 34 h of the tubes caused the crystalline α phase to increase in the tube material from ～28.5% to ～31.5% and the structure of the existing crystallites to become more perfect. This made the values of certain mechanical properties of the tubes to increase even by as much as 30%. The tubes following such thermal treatment could be used in cables exposed to heavy‐duty operation in arduous environments, where a larger margin from the standpoint of mechanical properties is required. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2130–2134, 2002     

Current basis for the ultrastructural clinical diagnosis of tumors: A review

The ultrastructural diagnosis of tumors requires a careful analysis that should be done in an orderly fashion. It requires precise planning from the time of specimen collection to the selection of the area to be examined. Pictures must be taken systematically and every micrograph should allow to answer whether the number of cells photographed is adequate; whether mitoses are present, what is the pattern of the tumor; what is the appearance of the cell membrane; whether the cells are joined by junctional complexes; whether free surfaces possess microvilli or cilia; what organelles are present and how they are distributed; whether there are secretory granules, melanosomes, or other cytoplasmic elements. Nuclear and nucleolar size and shape have to be taken into consideration. The composition of the interstitial extracellular matrix is important in certain types of tumors. Although these questions are not the only ones to be addressed, their use in a logical fashion is helpful when it concerns the ultrastructural diagnosis.     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.     

Effect of different acids with Δ9,12-dienoic structures on Δ9 desaturation activity in rat liver microsomes

The effect of oral administration, for 24 or 48 hr, of different octadeca fatty acids containing a 9,12-dienoic structure on the fatty acid composition and Δ9 desaturation activity of liver microsomes of rat fed a fat-free diet was studied. The ethyl esters of linoelaidic and γ-linolenic acids, the methyl ester of linoleic acid and free columbinic acid were administered to rats maintained on a fat-free diet. The supplementation of the fat-free diet with linoelaidate produced no relevant changes in the fatty acid composition pattern of liver microsomes and did not modify the percentage of conversion of palmitic to palmitoleic acid. The addition of linoleate or γ-linolenate to the fat-free diet returned liver microsome Δ9 desaturation activity toward the control and partially restored the liver microsome fatty acid spectrum found in the fat-free diet. Columbinic acid (5-trans-9-cis,12-cis-18∶3), which cannot be transformed into arachidonic acid, also decreased the Δ9 desaturation activity enhanced by the fat-free diet and evoked changes in the microsomal fatty acid composition similar to those produced by the ω6 fatty acids. These results suggest that the modulation of Δ9 desaturase activity evoked by dietary administration of unsaturated acids of ω6 series would depend on thecis double bond configuration of these acids.     

The biological leaching of an auriferous pyrite ore

The oxidation of an auriferous pyrite ore sample was evaluated in biological leaching experiments for subsequent gold recovery via cyanidation. In batch cultures, organisms derived from the mine site oxidized pyrite and ferrous iron at pH values as low as pH 0.6. The recovery of gold was variable in shake flask experiments. In stirred tank bioreactor leaching, gold recovery was proportional to the extent of iron dissolution by bioleaching. The leaching of arsenic from the sample was also directly proportional to iron dissolution.     

Flexural behavior of stratified reinforced concrete: construction,testing, analysis,and design

Stratified concrete poses a promising alternative for construction. Its fresh and hardened properties have been studied at the material level; however, structural behavior in steel reinforced specimens has not been studied. This paper focuses on the flexural behavior of eight stratified reinforced concrete (SRC) specimens representing slices from a slab or non-bearing wall. Specimens with two stratified concrete designs and three steel ratios were tested and compared to estimates from a fiber element numerical model and rectangular stress-block design methods from ACI 318 and Eurocode 2. The results suggest that SRC has similar damage modes as ordinary reinforced concrete (ORC). The fiber element model accurately estimated the measured behavior, while ACI 318 and Eurocode 2 differed from the experimental results by <25%. These prediction accuracies are similar to those for ORC. Therefore, the flexural design of SRC can be done using both fiber element and rectangular stress-block approaches.     

A modelling framework to support farmers in designing agricultural production systems

Given the new challenges confronting world agriculture, innovative production systems need to be designed at the farm level. As experiments are not easy to conduct at this level, modelling is required to evaluate ex-ante the multiple impacts of proposed innovations. A conceptual framework based on three sub-systems (biophysical, technical, and decisional) interacting within the farm is proposed to guide this process. The advantages and limitations of the framework are illustrated with three examples. The first describes a conceptual, rule-based model representing management decisions for the cultivation of salad in southern France. The second uses a computerized model of the three sub-systems to study irrigation management strategies on farms producing hay in southern France. The third presents a spreadsheet model designed to assist dairy farms in Morocco to define new livestock and forage system strategies. The lessons learned concern the modelling process, the fit between the type of model and its use, and the advantage of involving stakeholders in the design process of tools and innovations.     

Theoretical method for the study of plasmon generation in hybrid multilayer-optical fiber structures

A theoretical method is presented for the determination of the behavior of devices based on the deposition of multilayer structures on polished optical fibers. Plasmon generation in metallic layers is modeled. The method is based on the Rayleigh expansion of the electric fields and permits us to determine their distribution over the whole structure by an application of boundary conditions. Once the distribution is known, the power transmitted by the fiber can be computed as a function of the geometrical and refractive parameters of the device. The method is versatile and can be used as a theoretical tool for the design of devices of that type used for many different purposes. We present real experimental results obtained with an operative sensor that agree with the theoretical predictions of our technique and prove its suitability.     

An energy efficient middleware for an ad-hoc AAL wireless sensor network

DIA (Dispositivo Inteligente de Alarma, in Spanish) is an AAL (Ambient Assisted Living) system that allows to infer a potential dangerous action of an elderly person living alone at home. This inference is obtained by a specific sensorisation with sensor nodes (portables and fixes) and a reasoning layer embedded in a PC that learns of the users behaviour patterns and advices when actual one differs significantly of the normal patterns. In AAL systems, energy is a limited resource therefore sensor devices need to be properly managed to conserve energy. In this paper, we introduce the design and implementation of innovative and specific mechanisms at the sensory layer middleware which is capable of, first to discriminate spurious motion detections assuming that these signals do not resemble the patterns of real motion detections and, second to reduce the dynamics of messages by a sensor signal processing in order to compress the whole information in one single event. The middleware achieves power saving by modifying the raw information from sensors and adapting it to the predefined semantic of the reasoning layer. It manages the important task of data processing from sensors (raw information), and transfers the pre-processed information into the top layer of reasoning in a more energy efficient way. We also address the trade-off between reducing power consumption and reducing delay for incoming data. We present results from experiments using our implementation of these mechanisms at the middleware that comprises from node firmware to the PC driver. The number of messages of the proposed method with respect to the raw data is reduced by approximately 98.5%. The resources used in the PIR signal processing is reduced by approximately 85%. The resulting delay introduced is small (10–19 s) but system dynamics is slow enough to avoid contextualisation errors or reduction of system performance. We consider these results as very satisfactory.     

Effect of vacuum ageing on quality changes of lamb steaks from early fattening lambs during aerobic display

The effects of vacuum ageing on the quality changes of lamb steaks during retail display were assessed. Biceps femoris and Quadriceps femoris muscles from thirty early fattening lambs fed barley straw and concentrate or alfalfa and concentrate were used. Half of the muscles were vacuum aged for three weeks (VA), and the other half were not aged (control). Control and VA muscles were sliced and aerobically displayed. Weight loss, pH, aldehyde contents, instrumental color characteristics and color acceptance were measured at display days 1, 3, 7 and 14. At day 1 redness was higher in VA lamb. However, redness of VA lamb decreases more rapidly during further storage. Redness and color acceptance decreased in VA lamb from day 3, whereas in not-aged lamb the decrease was observed from day 7 onwards. From days 7 to 14 a drop of color acceptance accompanied by an increase in pH and a decrease in lightness was observed in control and VA lamb.