Effect of ascorbic acid 2-0-alpha-glucoside on hydrocortisone-induced cataract formation in developing chick embryos: I. Comparison of the preventive effect of ascorbic acid derivatives

The effect of ascorbic acid 2-O-alpha-glucoside (AA-2G) on hydrocortisone (HC)-induced lens opacity in developing chick embryo was examined and compared with those of ascorbic acid (AsA) and ascorbic acid 2-phosphate (AA-2P). The opacity was dose-dependently inhibited by a single administration of 10 or 20 mumol/egg of AA-2G and by three repeated administrations of 1, 3 or 10 mumol/egg of AA-2G. AA-2G was the most effective among the three compounds. Glucose did not enhance the preventive effect of AsA against HC-induced opacity, and neither dehydro ascorbic acid nor glucose also prevented HC-induced cataract. In the histological study, we observed many small vacuoles in the nuclear region of the opaque lens treated with HC. AA-2G inhibited the formation of such vacuoles, an effect closely correlated with the prevention of cataract formation.     

Dual role of dendritic cells in the induction and down-regulation of antigen-specific cutaneous inflammation

We have previously reported that contact sensitivity (CS) to dinitrofluorobenzene (DNFB) in C57BL/6 mice was mediated by MHC class I-restricted CD8+ T cells and down-regulated by MHC class II-restricted CD4+ T cells. In this study, we analyzed the contribution of dendritic cells (DC) in the induction of these two T cell subsets endowed with opposite functions. Hapten-pulsed skin- and bone marrow-derived DC, obtained from either normal C57BL/6 mice or from MHC class II (I+ II-) and MHC class I (I- II+)-deficient mice, were tested for their ability to prime normal mice for CS to dinitrofluorobenzene. Expression of MHC class I molecules by transferred DC was mandatory both for the induction of CS and for the generation of hapten-specific CD8+ T cells in lymphoid organs. I+ II- DC were as potent as I+ II+ DC in priming for CS, demonstrating that activation of effector CD8+ T cells can occur independently of CD4+ T cell help. I- II+ DC could not immunize for CS, although they could sensitize for a delayed-type hypersensitivity reaction to protein Ags. Moreover, I- II+ DC injected simultaneously with cutaneous sensitization down-regulated the inflammatory response, suggesting that hapten presentation by MHC class II molecules could prime regulatory CD4+ T cells. These results indicate that DC can present haptenated peptides by both MHC class I and class II molecules and activate Ag-specific CD8+ effector and CD4+ regulatory T cell subsets, concurrently and independently.     

Residual Stress in Siliceous Glass Between Mullite Crystals

A birefringence of siliceous glass, which is coexisting with mullite crystals, was studied by an optical polarizing microscope. The cause of the birefringence was assumed to be the residual stress induced by a large contraction difference between the mullite and glass on cooling. The stress has been evaluated to be as high as—0.3 GPa, and to correspond to the elastic one which began to develop at the glass transition point.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

XPS Characterization of reduced LaCoO3 perovskite

Three samples of LaCoO₃ were prepared by two different methods and calcined at 800 or 1000 °C. They had BET areas of 1, 12, and 16 m²/g and all of them showed pure perovskite X-ray diffraction patterns with identical unit cell dimensions. In a series of experiments the oxide, having larger surface area, was stepwise reduced in hydrogen at temperatures between 60 and 500 °C. The XPS spectra, taken at room temperature after evacuation at 400 °C at each reduction level, showed that the surface concentration of Co° was very low up to 300 °C but increased sharply between 300 and 350 °C (9–75%). This concentration further increased to 100% after 10 min reduction at 450 °C, but upon heating in hydrogen for an additional 10 min at 500 °C it decreased again to 75%. In another series of experiments the mixed oxide was reoxidized after each reduction. A fresh sample was reduced to 350 and 400 °C by contacting with hydrogen for 1 hr and evacuated at temperatures between 400 and 500 °C. Both high evacuation temperatures and reduction at 400 °C during 1 hr produced a sharp decrease in Co° surface concentration. These results are consistent with the catalytic behavior of this perovskite reported earlier by E. A. Lombardo et al. (4–7). A model is proposed to interpret the reduction of LaCoO₃.     

β-phase transformation and thermoelectric power in FeSi2 and Fe2Si5 based alloys containing small amounts of Cu

The effects of Cu addition on the β phase formation rate and the thermoelectric power in various FeSi₂ and Fe₂Si₅ based alloys was examined. The peritectoid reaction (a+→β) in FeSi₂ alloys was initially enhanced by the addition of Cu but it became slower for longer annealing times. The retained metallic ε was harmful for the thermoelectric power. The inherent thermoelectric properties of (FeSi₂)_99−XMn₁Cu_X (X=0–1.O at.%), (FeSi₂)_99−X Co₁Cu_X (X=0–1.0 at.%) alloys were attained after the elimination of ε. In the case of eutectoid reaction (→β+Si). Differential thermal analysis, X-ray diffraction and microscopic observation clearly confirmed that the eutectoid reaction rate was drastically enhanced by the addition of a small amount of Cu and its rate decreased with decreasing Cu content. The rate also depends on the annealing temperature and reached a maximum at about 1073 K for most alloys. The addition of only 0.1 at.% Cu was still very effective even in Mn or Co doped alloys. The thermoelectric power of these alloys increased very quickly with annealing time. Their final values decreased with Cu content and saturated at 0.2 at.% Cu. The value of the 0.1 at.% Cu added alloy was higher than that of both the conventional p- and a-type FeSi₂ based alloys. These results suggest that the Fe₂Si₅ alloys with a small amount of Cu may be attractive as new thermoelectric materials.     

The multiphase effect on crystal structure, hydrogen absorbing properties and electrode performance of Sc---Zr based Laves phase alloys

The crystal structure, hydrogen absorbing properties and electrode performance of Laves phase alloy systems, Sc---Zr---Ni---Mn and Sc---Ni---V systems, were studied by optical and scanning electron microscopy, X-ray powder diffraction, pressure-composition isotherm and electrochemical measurements. C14 and C15 Laves phases and minor ScNi-related phase were found in the Sc---Zr---Ni---Mn alloy system. The ScNi-related phase was composed of Sc, Zr and Ni elements. Two kinds of minor phase, BCC and ScNi-related phases, were identified in addition to the C15 phase in the Sc---Zr---Ni---V alloy system. The BCC contained mainly the element V. The ScNi-related phase contributed to an increase in the hydrogen capacity, but those in the V alloy system did not. The multiphase anode with a large amount of the ScNi-related phase showed a low durability against the KOH electrolyte. The substitution of Zr by Sc led to an improvement in the initial activation of the anode, but there was not a clear correlation between the presence of the multiphase in the anode and the rate capability.     

Crystallite size distribution and the lattice distortions in highly γ-irradiated linear polyethylene

Crystallite size distributions and lattice distortions have been analysed for highly-irradiated linear polyethylene in the direction normal to 1 1 0 and 0 0 1 lattice planes through X-ray line profile analysis. It has been found that the lateral crystallite size is little affected irradiation greater than 1000 Mrad, whereas that in the chain direction decreases almost linearly with the dose of irradiation. A minor difference in the crystallite size between irradiation atmospheres, i.e. irradiation in air or in vacuum, has been disclosed at a very high dose of irradiation. The above degradation behaviour of crystallites and the change in lattice distortions have proved that radiation cross-links are mainly formed in the amorphous region near the lamellar surface of polyethylene.     

A novel cleaning method of gold-coated atomic force microscope tips for their chemical modification

For chemical modification of gold-coated AFM tips with thiol or sulfide compounds, a new two-step precleaning procedure was studied. The two-step cleaning procedure involves (i) oxidation of organic contaminants on the AFM tips with ozone treatment and (ii) reduction of the oxidized gold surface by immersing the oxidized tip into pure hot ethanol at ca. 65 degrees C. The chemically modified tips prepared from gold-coated AFM tips precleaned by the two-step procedure gave almost the same tip characteristics as those chemically modified immediately after gold vapor deposition in a factory. The present two-step cleaning procedure can be used widely for chemical modification of commercially available gold-coated AFM tips with thiol or disulfide compounds for chemical force microscopy.