Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Fundamental Evaluation of Power Supply and Rectifiers for Wireless Power Transfer Using Magnetic Resonant Coupling

This paper provides a fundamental analysis of a power supply and rectifiers for wireless power transfer using magnetic resonant coupling (MRC). MRC enables efficient wireless power transfer over middle‐range transfer distances. MRC for wireless power transfer should operate at a high frequency in the industry science medical band, such as 13.56 MHz, because the size of the transfer device decreases at higher transfer frequencies. Therefore, the output frequency of the power supply on the transmitting side should be 13.56 MHz. In addition, the rectifier on the receiving side is operated at a high frequency. This paper focuses on the reflected power in the power supply and rectifiers. Thus, the parametric design method is clarified for the power supply, including a low‐pass filter to match the output, the impedance of the power supply with the characteristic impedance of the transmission line. In addition, the effects on the rectifiers of silicon carbide and gallium nitride diodes are confirmed by performing an experiment and a loss analysis.     

Spontaneous disappearance of traumatic macular holes in young patients

PURPOSE: To report the disappearance of traumatic macular hole in three eyes of three patients. METHODS: Clinical data of the patients were reviewed. RESULTS: The three patients were relatively young, ranging in age from 12 to 18 years old. In one eye of each patient, a small traumatic macular hole was observed at the first visit. Visual acuities ranged from 20/100 to 20/40. The macular holes resolved spontaneously 3 to 4 months after the trauma, and final visual acuity improved to 20/20 in all patients. CONCLUSION: Small traumatic macular holes in young patients can resolve spontaneously, and this can be associated with good visual recovery.     

Tuple calculus: Formal definition and conversion from first-order calculus

In classical database theory, relational calculus has long been used in expressing query formulae and integrity constraints. In fact, relational calculus formulae are much easier to deal with than first-order formulae when evaluating queries and validating database updates in the database environment. In deductive databases, however, first-order calculus is preferred because it is convenient when proof procedures are involved. Since both situations should coexist in advanced information systems, it is very desirable to devise a conversion procedure between relational calculus and first-order calculus. In this paper, interpretation of first-order formulae in the database environment is discussed first, then tuple calculus, an extension of relational calculus, is presented. This extension enables us to describe query formulae and general rules necessary in advanced information systems, in particular, dealing with complex objects. Finally, a conversion algorithm from first-order formulae into tuple calculus formulae is presented. Several application issues are also included.     

A cross-sectional analysis on relationships between maximum oxygen uptake and risk factors for cardiovascular diseases

We examined the relationships between maximum oxygen uptake (Vo2max) and cardiovascular risk factors including age (year), systolic blood pressure (mmHg), diastolic blood pressure (mmHg), serum total cholesterol level (mg/dl), serum high-density lipoprotein level (mg/dl), serum triglyceride level (mg/dl), blood glucose level (mg/dl), serum uric acid level (mg/dl), body fat (%bw), Body Mass Index (BMI), alcohol (points/day), cigarettes (/day), and physical activity (METs.exercise time/30 days). The alcohol point was defined as follows: beer 633ml = a glass of whiskey and water - sake 180ml = 1 point, and totaled at 30 days. The subjects of our study were 162 males (aged 40.6 +/- 13.1) and 133 females (aged 41.3 +/- 11.1) who underwent medical and physical examinations at the Fukui Industrial Health Center from April, 1991 to June, 1992. As a result of simple correlation analysis in males, Vo2max had significantly negative correlations with age (r = -0.223, p < 0.01), systolic blood pressure (r = -0.228, p < 0.01), diastolic blood pressure (r = -0.239, p < 0.01), or serum triglyceride level (r = -0.258, p < 0.001), serum uric acid level (p < 0.05), body fat (r = -0.230, p < 0.01), and BMI (r = -0.312, p < 0.001), and was positively correlated with physical activity (r = -0.249, p < 0.01). On the other hand, in females, age (r = -0.224, p < 0.01), systolic blood pressure (r = -0.222, p < 0.01), diastolic blood pressure (r = -0.267, p < 0.01), serum triglyceride level (r = -0.261, p < 0.001), body fat (r = -0.280, p < 0.01), and BMI (r = -302, p < 0.001), had significantly negative correlations with VO2max. However, partial correlations were tested after controlling body fat, BMI, cigarette, alcohol, physical activity, and age, none of the factors correlated with VO2max significantly. These findings suggest that the risk factors for cardiovascular diseases are related to VO2max, and the life style has an influence on these correlations. Thus, VO2max may be a comprehensive indicator for health promotion among the working population. Furthermore a longitudinal study is required to determine whether the increase in VO2max is related to the improvement in the risk of cardiovascular diseases.     

The development of MHD cold wall channels in the oil-fired condition

The durability of a cold wall MHD generator consisting of metal electrodes and alumina-coated peg insulators was experimentally examined in the oil-fired MHD condition with the additive of SO₂ corresponding to S = 0.54 wt%. The structure of the electrode wall and various anode and cathode materials were tested, with particular reference to developing long-life electrodes. It was clarified that Pt, SHOMAC (28.8 Cr−1.9 Mo) and SUS-304 as anodes and W---Cu (70 W−30 Cu) and WC---Ag (60 WC−40 Ag) alloys as cathodes were promising for durability and that the structure of an anode divided into two elements connected to each other with an SnO₂ resistor was very useful for uniformity of the anode corrosion pattern and the inter-anode voltages. It is reasonable to expect, from the test results, that the lifetime of a cold wall MHD generator in an oil-fired commercial plant will be over 4000 h, and therefore, a foundation for its commercial use has been established.     

Septic cholangitis occurring 11 years after inadvertent ligation of the right hepatic duct during cholecystectomy: a case report

We report a case of acute cholangitis caused by the inadvertent ligation of the right hepatic duct during a cholecystectomy performed 11 years before. When the condition of the right hepatic duct or accessory bile duct ligation persists for more than several years, resulting in atrophy of the relevant part of the liver, bile duct ligation will rarely cause severe clinical problems. However, acute cholangitis may occur, as in our patient, so long-term follow-up of the patient is warranted.     

Residual Stress in Siliceous Glass Between Mullite Crystals

A birefringence of siliceous glass, which is coexisting with mullite crystals, was studied by an optical polarizing microscope. The cause of the birefringence was assumed to be the residual stress induced by a large contraction difference between the mullite and glass on cooling. The stress has been evaluated to be as high as—0.3 GPa, and to correspond to the elastic one which began to develop at the glass transition point.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

XPS Characterization of reduced LaCoO3 perovskite

Three samples of LaCoO₃ were prepared by two different methods and calcined at 800 or 1000 °C. They had BET areas of 1, 12, and 16 m²/g and all of them showed pure perovskite X-ray diffraction patterns with identical unit cell dimensions. In a series of experiments the oxide, having larger surface area, was stepwise reduced in hydrogen at temperatures between 60 and 500 °C. The XPS spectra, taken at room temperature after evacuation at 400 °C at each reduction level, showed that the surface concentration of Co° was very low up to 300 °C but increased sharply between 300 and 350 °C (9–75%). This concentration further increased to 100% after 10 min reduction at 450 °C, but upon heating in hydrogen for an additional 10 min at 500 °C it decreased again to 75%. In another series of experiments the mixed oxide was reoxidized after each reduction. A fresh sample was reduced to 350 and 400 °C by contacting with hydrogen for 1 hr and evacuated at temperatures between 400 and 500 °C. Both high evacuation temperatures and reduction at 400 °C during 1 hr produced a sharp decrease in Co° surface concentration. These results are consistent with the catalytic behavior of this perovskite reported earlier by E. A. Lombardo et al. (4–7). A model is proposed to interpret the reduction of LaCoO₃.