Damage and plastic flow in a Al-Si-Cu thixocast alloy

Thixocast samples of an Al-Si-Cu alloy were solution treated at 500°C for 4 h, aged at 170°C for different times and tensile tested at room temperature. Statistical analysis on the fractured Si particles has pointed out how the fraction of damaged particles is influenced by the ageing treatments performed before deformation. The damage accumulation per unit of strain decreases with increasing ductility of the samples. The Considére criterion for plastic instability shows no significative necking.     

Premixed metal fibre burners based on a Pd catalyst

As an alternative to previously developed catalytic FeCrAlloy fibre mat burners based on perovskite catalysts, new catalytic burners have been developed based on Pd catalyst on lantana-stabilised Al₂O₃ and different fibre structures (NIT100A, NIT100S and NIT200S by ACOTECH NV). All development steps are considered, shifting from catalyst preparation (based on combustion synthesis of γ-Al₂O₃) to the optimisation of lantana and Pd loadings, from the definitions of the best catalyst-deposition conditions (washcoating) to the catalytic burners performances, determined in an ad hoc developed combustion chamber. The results show almost half pollutants emissions and better performance compared to various non-catalytic counterparts, especially as far as CO and NO_x emissions are concerned. Some flame instability problems were though registered, especially for one of the catalytic burner mattresses employed, at low specific power inputs and excesses of air (<375 kW/m² and <12%, respectively). Further, PdO/Pd transition is shown to influence the dynamic behaviour of the catalytic burners.     

Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites

The mechanical and microstructural properties of 6061+20% Al₂O_3p and 7005+10% Al₂O_3p aluminium based metal matrix composites joined by friction stir welding were analyzed in the present study. The two materials were welded into the form of sheets of 7 mm thickness after T6 treatment and were tested in tension at room temperature. The microstructure of the joints was observed by optical microscopy and the fracture surfaces were analyzed by employing a scanning electron microscope equipped with field emission gun in order to study the micromechanisms involved during the deformation.     

Nitrogen dynamics during till and no-till pasture restoration sequences in Rondônia,Brazil

The clearing of tropical rain forest in the Amazon basin has created large areas of cattle pasture that are now declining in productivity. Practices adopted by ranchers to restore productivity to degraded pastures have the potential to alter soil N availability and gaseous N losses from soils. We examined how soil inorganic N pools, net N mineralization and net nitrification rates, nitrification potential and NO and N₂O emissions from soils of a degraded pasture responded to the following restoration treatments: (1) soil tillage followed by replanting of grass and fertilization, (2) no-till application of non-selective herbicide, planting of rice, harvest followed by no-till replanting of grass and fertilization, and (3) the same no-till sequence with soybeans instead of rice. Tillage increased soil NH₄⁺ and NO₃^? pools but NH₄⁺ and NO₃^? pools remained relatively constant in the control and no-till treatments. Cumulative rates of net N mineralization and net nitrification during the first 6 months after treatment varied widely but were hightest in the tilled treatment. Emissions of NO and N₂O fluxes increased with tillage and with N fertilization. There were no clear relationships among rates of N fertilizer application, net N mineralization, net nitrification, NO, N₂O and total N oxide emissions. Our results indicate that pasture restoration sequences involving tilling and fertilizing will increase emissions of N oxides, but the magnitude of the increase is likely to differ based on timing of fertilizer application relative to the presence of plants and the magnitude of plant N demand. Emissions of N oxides appear to be decreased by the use of restoration sequences that minimize reductions in pasture grass cover.     

Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites

The mechanical and microstructural properties of 6061+20% Al₂O_3p and 7005+10% Al₂O_3p aluminium based metal matrix composites joined by friction stir welding were analyzed in the present study. The two materials were welded into the form of sheets of 7 mm thickness after T6 treatment and were tested in tension at room temperature. The microstructure of the joints was observed by optical microscopy and the fracture surfaces were analyzed by employing a scanning electron microscope equipped with field emission gun in order to study the micromechanisms involved during the deformation.     

Pasture mapping by classification of Landsat TM images. Analysis of the spectral behaviour of the pasture class in a real medium-scale environment: The case of the Piracicaba Catchment (12 400 km 2, Brazil)

Attempts to map vegetation types, especially pasture, from satellite sensor data in tropical and sub-tropical regions very often have limited success. This study analyses the accuracy of two classifications of Landsat Thematic Mapper (TM), with the aim of distinguishing the pastures from other vegetation classes in a meso-scale basin (12 400 km 2, Piracicaba basin, Brazil). The initial classification is based on non-supervised clustering of the images. The delimited classes are interpreted and merged by comparison with standard spectra from NASA. The second classification is a parallelepiped partition based on the merged clusters issued from the first one. The two classifications are compared by validation with 287 random field observations selected within the whole catchment. The results are discussed, analysing the spectral behaviour variability of the pasture class.     

Recent Trends,Applications, and Perspectives in 3D Shape Similarity Assessment

The recent introduction of 3D shape analysis frameworks able to quantify the deformation of a shape into another in terms of the variation of real functions yields a new interpretation of the 3D shape similarity assessment and opens new perspectives. Indeed, while the classical approaches to similarity mainly quantify it as a numerical score, map‐based methods also define (dense) shape correspondences. After presenting in detail the theoretical foundations underlying these approaches, we classify them by looking at their most salient features, including the kind of structure and invariance properties they capture, as well as the distances and the output modalities according to which the similarity between shapes is assessed and returned. We also review the usage of these methods in a number of 3D shape application domains, ranging from matching and retrieval to annotation and segmentation. Finally, the most promising directions for future research developments are discussed.     

Mechanical behavior and microstructure of Au-Ni brazes

Thin Au-Ni alloy (57.5 at. pct Au and 42.5 at. pct Ni) interlayer brazes between strong base metals were found to have very high ultimate tensile strengths (UTSs) as a result of the triaxial stress state within the braze (reducing the effective, or von Mises, stress) and the high strength of the braze alloy. This high strength can be rationalized by the observed very refined two-phase microstructure. The yield strength and quasi-steady-state flow stress of the braze alloy was found to be relatively strain-rate insensitive. These results explain the absence of time-dependent, or delayed, tensile failures that have been observed in other braze interlayers. The fracture process appears to be one of cavity nucleation by microplasticity, followed by cavity coalescence or impingement once the required nuclei density is achieved. Substantial cavity growth does not appear to occur. This failure process contrasts with that of other interlayer metals, in which the failure mechanism appears to be unstable cavity growth.     

Collateral blood supply through the ophthalmic artery: a steal phenomenon analyzed by color Doppler imaging

OBJECTIVE: This study aimed to evaluate the retrobulbar circulatory effects of reversed ophthalmic artery flow (ROAF) on the ophthalmic artery branches by means of color Doppler imaging. DESIGN: The design was a case-controlled study. PARTICIPANTS: Among 56 consecutive patients with severe (>70% stenosis) occlusive carotid artery disease, 15 patients (26.8%) with ROAF were identified. The control group consisted of 15 patients with similar degrees of carotid artery stenosis and forward ophthalmic artery flow. INTERVENTION: Arteriography and measurement of the retrobulbar hemodynamic parameters with color Doppler imaging were performed. MAIN OUTCOME MEASURES: Blood flow velocities and resistive index in the ophthalmic, central retinal, and temporal short posterior ciliary arteries were measured. RESULTS: Arteriography confirmed the diagnosis of ROAF in all 15 patients. There was no patient with ROAF diagnosed by arteriography and not diagnosed by color Doppler imaging. The frequency of bilateral severe occlusive carotid artery disease was significantly higher in the ROAF group (40%) compared to the control group (6.6%) (P = 0.04). Patients with ROAF showed significantly reduced vascular resistance in the ophthalmic artery (P = 0.03), higher vascular resistance, and lower blood flow velocities in the central retinal and temporal short posterior ciliary arteries (P < 0.05). CONCLUSION: This study suggests that patients with ROAF show a steal phenomenon, characterized by a shunt to the low-resistance intracranial circuit and reduction of retrobulbar blood flow.