Influence of accelerated ageing on methacrylate‐based denture resins heterogeneity as viewed by ESR‐spin‐probe method

The electron‐spin‐resonance (ESR) spin‐probe method, was used to study the heterogeneity of denture resins based on poly(methyl methacrylate). Results for three resins processed by microwave energy, conventional curing and cold curing (depending on the curing procedure and exposed to ageing in various environmental conditions) were compared. All three cured resins were stored over the same time (1200 h) in distilled water at ambient temperature and in artificial saliva at 348 K. The temperature‐dependent ESR spectra of a spin probe dispersed in the denture resins are analyzed in terms of line‐shapes and line‐widths. The appearance of two spectral components was taken as an indication of resin heterogeneity. The results reveal that the cold‐cured resin has a lower local density in comparison with microwave and conventionally cured resin. The amount of residual monomer also contributes to the local motion of polymer segments. The change of denture resins exposed to ageing is influenced both by the structure of the original resin and the ageing conditions. Restricted motion of a spin probe incorporated into the acrylic resins exposed to accelerated ageing suggests additional crosslinking of polymer chains. The differences are observed for all the investigated resins, but the highest change is observed with the cold‐cured resin. The ESR results are accompanied by T_g and T_m measurements. Copyright © 2005 Society of Chemical Industry     

The problem of the selection of an a posteriori error indicator based on smoothening techniques

This paper addresses the problem of assessing the quality of an a posteriori error estimate of a finite element solution. An error estimate based on local L2-projections is analysed in the case of translation-invariant meshes. It is shown that for general meshes this technique does not lead to an asymptotically exact estimator. The problem is analysed in detail in the one-dimensional setting. It is shown that an asymptotically exact estimator is not the optimal one when the solution is not sufficiently smooth. An optimal estimator for adaptively constructed meshes is given. Finally, a general mathematical framework for the quality assessment of estimators is introduced.     

Design and development of a multichannel potentiometer for monitoring an electrode array and its application in flow analysis

A versatile potentiometer that works with electrode arrays in flow injection and/or monosegmented flow systems is described. The potentiometer is controlled by a microcomputer that allows individual, sequential multiplexed or random accesses to eight electrodes while employing only one reference electrode. The instrument was demonstrated by monitoring an array of seven flow-through ion-selective electrodes for Ag(+) and for three electrodes for Cl(-), Ca(2+) and K(+). The figures of merit of the individual and multiplexed (summed) readings of the electrode array were compared. The absolute standard deviation of the measurements made by summing the potential of two or more electrodes was maintained constant, thus improving the precision of the measurements. This result shows that an attempt to combine the signals of the electrodes to produce a more intense signal in the Hadamard strategy is feasible and accompanied by a proportional improvement in the precision of individual measurements. The preliminary tests suggest that the system can allow for 270 determinations per hour, with a linear range from 1.0 x 10(-2) to 1.0 x 10(-4) mol l(-1) for the three di inverted exclamation markerent analytes. Detection limits were estimated as 3.1 x 10(-5), 3.0 x 10(-6) and 1.0 x 10(-5) mol l(-1) for Cl(-), Ca(2+) and K(+), respectively.     

Integrated 1.3-/spl mu/m DFB laser electroabsorption modulator based on identical MQW double-stack active layer with 25-GHz modulation performance

1.31-/spl mu/m electroabsorption modulators monolithically integrated with a DFB laser diode have been realized using an identical InGaAsP-InP multiple quantum-well-layer structure composed of two different QW types. Low laser threshold currents <13 mA and high 3-dBe cutoff frequency up to /spl sim/25 GHz have been measured.     

Low strain rate plasticity of continuously cast carbon steels

By a special plastometric method, the straightening operation of a vertically cast strand of two carbon steels was simulated. The temperature dependence of the low strain rate plasticity of both the steels examined is analogous although caused by very different reasons. As to the plain carbon steel, the amount of ferrite and its location is of prime importance, whereas in the case of eutectoid steel various modes of fracture and the influence of temperature on the relative plasticity of type II MnS inclusions are influencial. To avoid transverse cracking, it seems to be suitable to keep the strand at a rather high temperature (above 900 °C). Temperature cycling seems to be fundamental as to the structural changes taking place in the strand (grain size refining, ferrite fraction if any), whereas analogous influences of straining are more or less inexpressive. Of course, the results obtained are of quality only since the practical and laboratory conditions differ significantly. The knowledge obtained could be applied in regulating the intensity of strand cooling with the aim of lowering the waste portion and improving the surface quality of worked products.     

Regulation of interrenal secretion in the axolotl, Ambystoma mexicanum

The regulation of corticosteroid secretion of the adrenal cortex (interrenal tissue) of axolotl (Ambystoma mexicanum) was studied using in vitro preparations of kidney containing interrenal tissue. Normally, 0.3-0.65 ng/5 min corticosterone and 0.15-0.3 ng/5 min aldosterone were released from the tissue. Regulatory peptides were effective in the following range: ACTH = arginine vasotocin > urotensin II > angiotensin II. They stimulate an elevation of corticosterone (plus 0.2-1 ng/5 min) and of aldosterone (plus 0.05-0.15 ng/5 min). The three primary effector systems leading to second messengers, adenylate cyclase (forming cAMP), phospholipase C (forming InsP3 + DAG), and phospholipase A2 (liberating arachidonic acid) are involved in stimulation of biosynthesis. It can be suggested that the second messengers stimulate the biosynthesis at the level of the steps between pregnenolone and corticosterone ('3 beta-hydroxysteroid-dehydrogenase etc.), because the release of corticosterone is more stimulated than aldosterone. This is different than the regulation of anuran interrenal tissue. Ca++ ions are involved in corticosterone secretion. Verapamil inhibits immediately the secretion of corticosteroids and elevation of external Ca++ stimulates the release. It is suggested that Ca++ mediates the secretion process itself. Metamorphosis does not change the response of the interrenal gland compared with the neotenic animal.     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…