Study of Adsorption/Desorption Effect of 2-Mercaptobenzothiazole as Sweet Corrosion Inhibitor on API-5L X60 Steel

Protection of Metals and Physical Chemistry of Surfaces - In this study, the inhibitive performance of 2-mercaptobenzothiazole (2MBT) and 2-aminobenzothiazole (2ABT) were investigated on API-5L X60...     

Improved formic acid oxidation using electrodeposited Pd–Cd electrocatalysts in sulfuric acid solution

In the present research, nanostructured Pd–Cd alloy electrocatalysts with different compositions were produced using the electrodeposition process. The morphology of the samples was studied by scanning electron microscopy analysis. Also, the elemental composition of the samples was determined by energy-dispersive X-ray spectroscopy and elemental mapping tests. Tafel polarization and electrochemical impedance spectroscopy methods were employed to determine the electrochemical corrosion properties of the synthesized samples in a solution containing 0.5 M sulfuric acid and 0.1 M formic acid. The linear sweep voltammetry, cyclic voltammetry, and chronoamperometry techniques were also employed to evaluate the electrocatalytic activity of prepared samples toward the oxidation of formic acid. In this respect, the influence of some factors such as formic acid and sulfuric acid concentrations and also potential scan rate was investigated. Compared to the pure Pd sample, the Pd–Cd samples were more reactive for the oxidation of formic acid. Besides, the sample with a lower amount of Pd (Pd_1·3Cd) demonstrated much higher electrocatalytic activity than the Pd_7·1Cd and Pd_2·1Cd samples. The observed high mass activity of 15.06 A mg^?1_Pd for the Pd_1·3Cd sample which is 21.1 times higher than Pd/C is an interesting result of this study.     

Drag coefficient of flow around a sphere: Matching asymptotically the wide trend

An empirical relationship of drag coefficient of flow around a sphere is developed for the entire range of Particle Reynolds numbers reported in the literature from Stokes regime to the condition when turbulent boundary layer prevails. The relationship is obtained using an approach to match asymptotically the wide trend of drag coefficient. The matching approach, which relies on dividing the wide trend into smaller segments that can be combined into an overall relationship, employs regression techniques and thus warrants the best-fit accuracy results. The relationship is calibrated with experimental data available in the literature covering the entire range for Reynolds numbers up to ~ 10⁶. For Reynolds values greater than 10⁶, the relationship renders a drag coefficient of 0.2. The performance of the relationship is tested and compared with other suitable models found in the literature. This relationship is also transformed into an explicit expression for settling velocity calculations.     

Intramuscular ceftriaxone compared with oral amoxicillin-clavulanate for treatment of acute otitis media in children

Two hundred and fifteen children aged 4 months 6 years with acute otitis media (AOM) were randomized to be treated either by a single i.m. injection of ceftriaxone, 50 mg/kg, with a second dose in the event of unsatisfactory response after 48 h or a history of recurrent AOM (109 patients) or amoxicillin clavulanate 12.5 mg tid (106 patients). The failure rate was similar in children treated by ceftriaxone and amoxicillin clavulanate, 4.6% and 4.7%, respectively (standard error for intergroup difference -2.87%, 95% confidence interval -5.62% to 5.87%). No significant differences between the groups were found in the dynamics of the resolution of the acute symptomatology, otoscopy findings, relapse rate at 30 days or tympanographic evidence of middle ear effusion at the scheduled visits on days 30, 60 and 90. Recurrence of AOM between days 31 and 90 was observed significantly in more children treated with amoxicillin clavulanate than with ceftriaxone--25 out of 84 (29.4%) versus 11 out of 81 (13.6%) (P = 0.012). Conclusion: Ceftriaxone injection(s) is as efficient at least as 10-day oral amoxicillin clavulanate for treatment of acute otitis media in children. Although not recommended as routine, ceftriaxone can be considered in the management of acute otitis media under special circumstances, particularly in cases when the ability to tolerate or absorb oral drugs is compromised, in children refusing or unable to take oral therapy or when the compliance is questionable.     

Hormonal changes during a 20-week confinement

BACKGROUND: When the European Space Agency planned the EUROMIR'95 long-duration flight with a European astronaut on board the Russian orbital MIR station, it organized simultaneously a ground simulation, called the Human Behaviour Study, of this manned space mission. The ground simulation was a confinement experiment, and this paper describes the changes in volume-regulating hormones that occurred during and after 20 weeks of confinement. METHODS: In a normobaric diving chamber, 3 subjects were confined for 135 d. Arterial pressure, plasma concentrations of blood volume-regulating hormones (active renin and arginine-vasopressin), and urinary variables (aldosterone, arginine-vasopressin, and metabolites of catecholamines) were measured before, during, and after confinement. RESULTS: Arterial pressure was increased from week 1 until week 15 of confinement, while heart rate was elevated from week 6 until the end of the simulation. Plasma active renin was elevated throughout the confinement (after week 6). Urine volume increased transitively on the first 2 d of confinement. CONCLUSIONS: The results obtained during this long-term confinement experiment have major importance regarding concerns about spaceflight and bed rest data, because we observed hormonal changes during the experiment that normally are assigned to the fluid shift that occurs in weightlessness or in the head-down tilt position (i.e., an increase of renin, an increase of urinary volume during the first two days, and a decreased urinary cyclic guanosine monophosphate.     

Luminescent Amphiphilic Aminoglycoside Probes to Study Transfection

We report the characterization of amphiphilic aminoglycoside conjugates containing luminophores with aggregation-induced emission properties as transfection reagents. These inherently luminescent transfection vectors are capable of binding plasmid DNA through electrostatic interactions; this binding results in an emission “on” signal due to restriction of intramolecular motion of the luminophore core. The luminescent cationic amphiphiles effectively transferred plasmid DNA into mammalian cells (HeLa, HEK 293T), as proven by expression of a red fluorescent protein marker. The morphologies of the aggregates were investigated by microscopy as well as ζ-potential and dynamic light-scattering measurements. The transfection efficiencies using luminescent cationic amphiphiles were similar to that of the gold-standard transfection reagent Lipofectamine® 2000.     

An economic and sensitive method for extracting chromium speciation in airborne inhalable dust,using a green sample treatment coupled with electrothermal atomic absorption

ABSTRACT

A new approach of cloud point extraction CPE procedure is optimized for hexavalent chromium determination in airborne dusts. Triton X-114 is used as a surfactant and 1-(2-pyridylazo)-2-naphthol as a specific complexing agent for the trivalent chromium’s removal from the aqueous phase to isolate hexavalent chromium compounds. The parameters influencing the extraction protocol (pH, surfactant concentration, and temperature are optimized. The obtained detection and quantification limits are 0.1 and 0.4 μg/L, respectively. The linearity is verified, with a regression coefficient close to 0.999 and the extraction recovery exceeds 99%. The method was successfully applied to analyze airborne samples collected from workplaces.     

Optimal Deep Learning Based Intruder Identification in Industrial Internet of Things Environment

With the increased advancements of smart industries, cybersecurity has become a vital growth factor in the success of industrial transformation. The Industrial Internet of Things (IIoT) or Industry 4.0 has revolutionized the concepts of manufacturing and production altogether. In industry 4.0, powerful Intrusion Detection Systems (IDS) play a significant role in ensuring network security. Though various intrusion detection techniques have been developed so far, it is challenging to protect the intricate data of networks. This is because conventional Machine Learning (ML) approaches are inadequate and insufficient to address the demands of dynamic IIoT networks. Further, the existing Deep Learning (DL) can be employed to identify anonymous intrusions. Therefore, the current study proposes a Hunger Games Search Optimization with Deep Learning-Driven Intrusion Detection (HGSODL-ID) model for the IIoT environment. The presented HGSODL-ID model exploits the linear normalization approach to transform the input data into a useful format. The HGSO algorithm is employed for Feature Selection (HGSO-FS) to reduce the curse of dimensionality. Moreover, Sparrow Search Optimization (SSO) is utilized with a Graph Convolutional Network (GCN) to classify and identify intrusions in the network. Finally, the SSO technique is exploited to fine-tune the hyper-parameters involved in the GCN model. The proposed HGSODL-ID model was experimentally validated using a benchmark dataset, and the results confirmed the superiority of the proposed HGSODL-ID method over recent approaches.     

A study of the impact of the willingness-to-learn of CAD novice users on their competence development

The notion that ‘attitude drives behavior’ manifests itself in a variety of ways in educational and occupational settings. As applied to CAD competence development, industrial training of novice CAD users on their way to becoming competent CAD users consume a lot of corporate resources. This paper is the third paper in the line of research that attempts to answer the question having to do with what it takes to make a competent CAD user. Specifically, we examine the CAD-specific factors revolving around the trainees’ willingness-to-learn CAD.These factors are analyzed in two stages. At the start of the training, trainees’ initial attitude towards CAD is established by means of a short questionnaire. Afterwards, throughout the training, trainees’ behavior (online and offline practice) is gauged and, in turn, a relation is established to illustrate how this practice leads to the development of CAD-specific skills. For this purpose, another short questionnaire was utilized. Strong correlations were established relating the trainees’ CAD-specific behavior with the CAD-specific outcomes of learning CAD syntax.Furthermore, and in order to assess the quality of the trainees’ learning of CAD, overall competence was monitored throughout the study via performance measures that describe the time it took the trainees to build test models (speed), which reflects upon the ability to learn the syntax of the CAD tool (declarative knowledge). The sophistication of the models is also used as another measure. Correlating the trainees’ character attributes with these assessed measures, it was found that the stronger is the trainees’ will to learn CAD, the stronger is the likelihood to learn faster. Perhaps more importantly, trainees with initial favorable attitude toward CAD were shown to develop increasingly positive behavior that manifested through additional practice and other forms of visible effort.