Characterization of Austempered Ductile Iron Through Barkhausen Noise Measurements

The outstanding mechanical properties of austempered ductile irons (ADI) are linked to the microstructure of the matrix obtained by subjecting a ductile iron with an appropriate composition to a heat treatment called austempering. Then the microstructure of the matrix consists of bainitic ferrite with different volume fractions of retained austenite. The aim of this work is to use the magnetic Barkhausen noise (MBN) as a nondestructive method for characterizing the microstructure of ADI. First, it is shown that the amplitude and position of the peak-shaped MBN response is quite sensitive to the microstructure of the matrix of ductile irons. Thus each type of constituent (equiaxial ferrite, pearlite, martensite or bainite) exhibits a typical response and, in turn, it can be identified from the MBN response. Furthermore, a good correlation is found between MBN signal parameters and ADI heat treatment parameters, indicating that MBN is also quite sensitive to fine evolutions of the microstructure of ADI. MBN peak position is especially sensitive to the type of bainite, whereas peak amplitude is linked to the progress of the bainite reaction. Hence MBN measurements appear to be a powerful tool to assess some important microstructural features of ADI castings.     

Determination du coefficient d'extinction molaire de OH− dans les verres fluores a base de metaux lourds

The extinction coefficient ? at 2.9 μm for OH in fluoride glasses is measured by determining the amount of HF evolved during heating of the glass under steam and the corresponding intensity of the OH absorption band. This coefficient is respectively equal to 31 litre mole^?1 cm^?1 for BTYbZ glass (15 BaF₂ - 29 ThF₄ - 28 YbF₃ - 28 ZnF₂) and 19.5 litre mole^?1 cm^?1 for BALLA glass (34 BaF₂ - 57 ZrF₄ - 4 AlF₃ - 5 LaF₃).     

EWF method to study long term fracture properties of cross‐linked polyethylene

The influence of cross‐linking on fracture properties of polyethylene has been studied by the method of essential work of fracture (EWF). Three distinct values of the cross‐link density were obtained by β irradiation with three distinct radiation doses, and characterized by sol‐gel and solvent swelling measurements. EWF tests were performed at speeds of 0.045 to 100 mm min^–1 at 80 and 110°C. The fracture toughness, as defined from the EWF method, is analyzed through essential (w_e) and nonessential (βw_p) components. Both values were found to be decreasing functions of the cross‐link density. But cross‐linking also suppresses the toughness decrease observed in linear PE at low speeds/high temperatures. It is hypothesized that cross‐linking prevents the chain disentanglement that occurs during crack growth. In conclusion, EWF tests performed at low speeds appear as an interesting method to characterize the influence of structural factors on the fracture properties of polyethylene. POLYM. ENG. SCI., 45:424–431, 2005. © 2005 Society of Plastics Engineers     

Preparation and Characterization of Inorganic Fluorides—Fullerenes Compounds

Reaction of metallic fluorides: WF₆ TaF₅, NbF₅ and TiF₄ with C₆₀/C₇₀ extract was performed at appropriate temperatures. M0F₅ and BF₃ fluorides do not react. Chemical formulas based on mass uptake show MF_n/C₆₀ ratios up to 2.00. Compounds were analysed by means of X-ray diffraction, FT-IR and NMR spectroscopies. The presence of neutral fluorides and associated anionic species is put forward and it is shown that MF_n compounds do not act as fluorination agents. Electrical conductivity measurements are also presented.     

Perturbation of an elementary logic system submitted to the effects induced by a perturbing sine wave

Data transmission networks and systems are often subject to perturbations due to the fact that (low level) data signals are surrounded by perturbing electromagnetic fields. This paper presents and analyses information perturbing mechanisms. The authors examine data streams transmitted by an elementary system which represents the basis of any electronic device. We show the influence of technological families of cmos circuits and present a test method and bench to investigate the sensitivity of devices under test by means of statistical parameters.     

Reactivity of steam in exhaust gas catalysis III. Steam and oxygen/steam conversions of propane on a Pd/Al2O3 catalyst

A 1% Pd catalyst (38% dispersion) was prepared by impregnating a γ-alumina with palladium acetylacetonate dissolved in acetone. The behaviour of this catalyst in oxidation and steam reforming (SR) of propane was investigated. Temperature-programmed reactions of C₃H₈ with O₂ or with O₂ + H₂O were carried out with different stoichiometric ratios S(S =[O₂]/5[C₃H₈]). The conversion profiles of C₃H₈ for the reaction carried out in substoichiometry of O₂ (S < 1) showed two discrete domains of conversion: oxidation at temperatures below 350°C and SR at temperatures above 350°C. The presence of steam in the inlet gases is not necessary for SR to occur: there is sufficient water produced in the oxidation to form H₂ and carbon oxides by this reaction. Contrary to what was observed with Pt, an apparent deactivation between 310 and 385°C could be observed with Pd in oxidation. This is due to a reduction of PdO_x into Pd⁰, which is much less active than the oxide in propane oxidation. Steam added to the reactants inhibits oxidation while it prevents the reduction of PdO_x into Pd⁰. Compared to Pt and to Rh, Pd has a higher thermal resistance: no deactivation occurred after treatment up to 700°C and limited deactivation after treatment up to 900°C, provided that the catalyst is maintained in an oxygen-rich atmosphere during the cooling.     

Phase Equilibria in the Na2O-Cs2O-SiO2 System

The Na₂O-Cs2O-SiO₂ system has been investigated by means of a new differential thermal analysis apparatus. Two compounds have been observed for the first time in the metasilicate and disilicate joins. The CsNaSi₂O₅ disilicate melts congruently at 1217 K and the peritectic fusion of the CsNaSiO₃ metasilicate occurs at 1120 K.