Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Dielectric,ferroelectric, and energy storage properties in dysprosium doped sodium bismuth titanate ceramics

In this work, Na_0.5(Bi_1-xDy_x)_0.5TiO₃ (0?≤?x?≤?15%) ceramics were prepared via solid state reaction method and were characterized. A stable and pure perovskite phase was revealed by X-ray diffraction analysis for all compositions and a symmetry change from rhombohedral to orthorhombic phase was detected beyond 10% of Dy substitution. The incorporation of Dy³⁺ into Sodium Bismuth Titanate (Na_0.5Bi_0.5TiO₃) matrix allows a substantial decrease of the coercive field, an increase in the resistivity, and leads to a high stability of the dielectric permittivity (??/?_(150?°C) ≤?±?15%) over a wide temperature range. Furthermore, this system was found to exhibit improved energy storage properties at high temperatures with a maximum energy density of 1.2?J/cm³ obtained for 2%Dy composition at 200?°C. The obtained results are very promising for energy storage capacitors operating at high temperatures.     

Investigation of the power dissipation during IGBT turn-off using a new physics-based IGBT compact model

New compact models of the IGBTs (both non-punch through IGBT (NPTIGBT) and punch-through IGBT (PTIGBT)) are presented in this paper. The models are implemented in the SABER circuit simulator and used for a study of IGBT anode current and voltage characteristics during a device turn-off (clamped inductive load circuit with gate controlled turn-off), since these parts of the transient characteristics essentially predict the power dissipation (V×I) inside the device. It is shown that PTIGBTs are faster than NPTIGBTs, this becoming more apparent at higher clamp voltages.     

A New Algorithm for the Elimination of Common Subexpressions in Hardware Implementation of Digital Filters by Using Genetic Programming

A new algorithm based on Genetic Programming (GP) for the problem of optimization of Multiple constant Multiplication (MCM) by Common Subexpression Elimination(CSE) is developed. This method is used for hardware optimization for DSP systems. A solution based on Genetic Programming is shown in this paper. The performance of the technique is demonstrated in one- and multi-dimensional digital filters with constant coefficients.     

On development of a finite dynamic element and solution of associated eigenproblem by a block Lanczos procedure

The paper first presents the details of the development of a new six-noded plane triangular finite dynamic element. A block Lanczos algorithm is developed next for the accurate and efficient solution of the quadratic matrix eigenvalue problem associated with the finite dynamic element formulation. The resulting computer program fully exploits matrix sparsity inherent in such a discretization and proves to be most efficient for the extraction of the usually required first few roots and vectors, including repeated ones. Most importantly, the present eigenproblem solution effort is shown to be comparable to that of the corresponding finite element analysis, thereby rendering the associated dynamic element method rather attractive owing to superior convergence characteristics of such elements, presented herein.     

A generalized continuum theory for multiphase suspension flows

A continuum theory for multiphase particulate suspensions in a fluid media is formulated. The generalized fundamental balance laws for the particulate phases as well as for the continuous suspending fluid phase are presented. The thermodynamics of a multiphase system is studied and the method of Lagrangian multipliers is employed to include the constraints of incompressibility of materials of the constituents and the criterion for fully saturated media. Constitutive equations are developed which include microrotational and microdilatational effects. The basic equations of motion of different phases are derived and discussed. Special considerations are given to the case of incompressible constituents. Examples of applications of the present theory to dilute suspension flows and multiphase sedimentations are also discussed.     

An object design framework for structural engineering

Object-oriented principles have introduced several useful concepts for developing complex software systems. As a result, several methodologies have been suggested for the overall design of software systems based on these concepts. Methodologies and frameworks for designing objects that are to be part of the software systems are currently lacking. This paper proposes anobject design framework andmethodology, which utilizes the object-oriented concepts, for planning, organizing and designing structural engineering design objects. Design objects in an integrated structural engineering system are complex and often related to each other in various different ways. The paper also identifies several important relationships among structural engineering design objects. These relationships serve as communication channels through wich design objects send messages to and receive responses from each other. Several examples, drawn from reinforced concrete structures, will be presented to demonstrate the object design methodology and to illustrate how the framework is effective in reducing the complexity of design objects in an integrated structural engineering system.     

File size models for shared content over the BitTorrent Peer-to-Peer network

Peer-to-Peer (P2P) traffic has increased rapidly over the past few years, with file sharing providing the main drive behind such traffic. In this work we perform a measurement study of the content shared over the popular BitTorrent P2P file sharing network. We mathematically model the file size distributions of shared files after categorizing them into Audio, Video, Archive and CD image classes. For each of these categories we look into the most popular shared file formats and investigate their file size statistics. This provides an important milestone to building a realistic simulation framework for P2P systems, and for future analytical modeling of P2P networks.