BER performance analysis of a direct conversion receiver

Direct conversion receivers are increasingly popular for use in mobile terminals. This is due to advantages over other architectures such as heterodyne receivers in terms of cost, electrical current, and physical size. However, a direct conversion receiver often generates a DC-offset that has to be taken care of either by suppressing the DC-offset in the radio-frequency part of the receiver, or by taking care of it during baseband processing. A theoretical analysis of the bit error rate (BER) performance in a direct conversion receiver with different levels of DC-offset suppression is presented. Explicit results are presented on how the BER depends on the signal-to-noise ratio (SNR), the signal-to-DC-level, and the choice of pilot symbols both with M-QAM and M-PSK in a slow, flat Rayleigh fading channel. A design rule, which applies to the design of DC-compensation in direct conversion receivers, is also presented     

Surface hydrophobization of CNF films by roll-to-roll HMDSO plasma deposition

Cellulosic films are typically sensitive towards moisture which limits their industrial applicability. In this study the films made from cellulose nanofibrils (CNF) were surface silylated with hexamethyldisiloxane (HMDSO) by roll-to-roll plasma deposition. The effects on surface hydrophobicity were clear and indisputable. Water contact angles of non-modified and plasma-deposited CNF films were 23° and 103°, respectively. As a result of surface silylation the relative polarity decreased from 46.8% to 0.6%. Surface hydrophobicity correlated well with the plasma deposition line speeds (0.5, 5, and 10 m/min) and the water vapor barrier properties. Silylation also decreased the oxygen transmission rates both at 50% and 80% relative humidity as compared to non-modified CNF films. All films were completely impermeable to olive oil and intact in contact with castor oil, toluene, and n-heptane or mixtures of them. The developed surface hydrophobization method can be exploited in strengthening the position of cellulosic films in high performance film applications.     

Nonlinear diffusion filtering of images obtained by planar laser-induced fluorescence spectroscopy

The application of nonlinear anisotropic diffusion filtering to reduce noise and enhance contours in images obtained by two-dimensional planar laser-induced fluorescence (PLIF) spectroscopy is presented. In this process the diffusion coefficient is locally adapted, becoming negligible as object boundaries are approached. Noise is efficiently removed, and object contours are strongly enhanced. The technique is demonstrated with PLIF images obtained from the OH radical recorded in turbulent flames. We show that nonlinear diffusion is suitable as a preprocessing step, before image segmentation becomes possible, and we demonstrate how the technique is applied for the quantitative extraction of flame reaction boundaries from PLIF data.     

Direct synthesis of carbon nanofibers on the surface of copper powder

A novel approach to synthesize carbon nanofibers (CNFs) directly on the surface of metal μm-sized particles to evenly disperse the carbon nanomaterials in a composite material was proposed. As a metal matrix, 5–10 μm copper particles were utilized. As a carbon source, C₂H₂, CH₄ and CO were examined. The best conditions were found to be in C₂H₂ (30 cm³/min) and H₂ (260 cm³/min) atmosphere at the temperature of 750 °C. The composites based on copper and CNFs prepared by vacuum hot pressing showed the increase in hardness from 35 to 60 kg/mm² almost retaining pure copper electrical properties.     

Ecological and biological determinants of trace elements accumulation in liver and kidney of Pontoporia blainvillei

The present work tested whether ecological and biological variables have an influence on the assimilation of trace elements by the tissues of a cetacean from the Western South Atlantic Ocean. No significant differences were observed in the concentrations for both sexes. As individuals from the two sampling areas belong to distinct genetic and morphological populations, animals of similar body length were older on the southeastern than on the southern coast. The liver showed the highest concentrations of mercury, whereas the highest levels of cadmium were found in the kidney. Hepatic mercury, cadmium and selenium in individuals from the south coast were about four times as high as those from the southeast coast. However, arsenic in the liver and kidney were similar in both coastal areas. Hepatic mercury, cadmium and selenium concentrations increased with body length in individuals from the southeastern coast, although no significant correlations (P>0.05) were observed between body length from either area and the renal and hepatic As concentrations. A significant positive linear relationship was observed between molar concentrations of Hg and Se in the liver of all individuals from both areas (r2=0.93; P<0.001), presenting Se:Hg ratios close to 4. Differences found among the concentrations of Hg, Cd and Se in dolphins from both areas were probably due to the preferred prey, bioavailability of elements in each marine environment, and environment variables (water temperature, net primary production). As a consequence, concentrations of trace elements in the tissues of this species can be considered to be a result of the surrounding environment.     

Treatment of adrenoleukodystrophy with bone marrow transplantation

Three children with adrenoleukodystrophy (ALD) underwent allogeneic bone marrow transplantation (BMT) between 1992 and 1993. The first boy had attention deficits, marked neuropsychological deficits and widespread demyelination in the frontal lobes on MRI before transplantation. Four years later he has mentally deteriorated and the demyelination on MRI has progressed. The second boy had no symptoms but had white matter lesions on MRI when diagnosed. He was regularly followed with MRI and neuropsychological investigations until BMT 18 months later. A progress of the lesions was noted on the initial MRI investigations, and 4 months before BMT a worsening of deficits in attention and kinaesthetic praxis could be observed. He rapidly deteriorated after the transplantation and died 18 months later. Both PCR and in situ hybridization confirmed the presence of donor cells in the brain. The third boy had no symptoms but white matter lesions on MRI when diagnosed. The neuropsychological tests remained normal but a slight progress was observed on MRI just before transplantation. This boy is still healthy 3.5 years after BMT. BMT as treatment for ALD has to be considered very early, even if a child without symptoms but signs of demyelination on MRI, if a suitable donor is available.     

Integrating electronic conferencing to enhance problem solving in nursing

The authors describe how a computer-mediated conference was integrated into a baccalaureate nursing program clinical course. They discuss methods used in implementing the conference, including a technical review of the software and hardware, and methods of implementing and monitoring the conference with students. Examples of discussion items, student and faculty responses to posted items, and responses to use of the computer-mediated conference are included. Results and recommendations from this experience will be useful to other schools integrating computer-mediated conference technology into the nursing school curriculum.     

Zone melting of indium phosphide

Bulk indium phosphide crystals have been prepared by zone melting with dislocation densities 104 ≤ N_d ≤ 105 cm^-2. The residual impurity level in nominally undoped crystals and the dopant distribution in Cd-, Sn- and Ge-doped zone melted ingots, as revealed by spark source mass spectrometric analyses, indicate a strong interaction between segregation at the solid/liquid interface and vapor transport. The effective distribution coefficients for Sn and Ge in zone melted InP are k_e(Sn) = 0.3 and k_e(Ge) = 0.4. The free electron concentration measured in the middle section of nominally undoped ingots is N_D-N_A = 1.9 × 10¹⁵ cm^-3 corresponding to a Hall mobility Μ_e = 3263 cm^2V-1sec^-l.     

Characterization of anodized aluminium—Copper vapour-deposited films by ion scattering spectrometry

Composition-depth profiles for anodized films, 100 Å thick, formed under galvanostatic conditions on vapour-deposited aluminium containing 1–10 at.% copper have been obtained via Ion Scattering Spectrometry (ISS). The OAl ratio found for the anodic layer corresponds to that for Al₂O₃ and the Cu concentration in the aluminium metal measured near the oxide—metal interface was similar to that for non-oxidized alloys. Additionally, no metallic impurities (> 0.1 at.%) were detectable in the oxide layer or the alloy.     

Electron beam float zone growth of niobium-tantalum alloy crystals

The growth of seeded crystals of Nb_(1−x)Ta_x of composition 0 < x < .25 by electron beam float zoning is described. The purity of these crystals is characterized on the basis of spark source mass spectrometric analysis.