Handover and Uplink Power Control Performance in the 3.84 Mcps TDD mode of UTRA Network

In this article we consider the performance of the 3.84 Mcpstime-division duplex (TDD) mode of UTRA (Universal TerrestrialRadio Access) network. We emphasize two of the radio resourcemanagement algorithms, handover and uplink power control, whoserole in the overall system performance is studied extensively.First, a handover algorithm used in WCDMA (Wideband Code DivisionMultiple Access) standard is considered in a TDD-mode operation.This gives rise to a careful setting of different handoverparameters, and the evaluation of the effects to the systemperformance. Secondly, the specified uplink power controlalgorithm is considered. Since it is based on several user-mademeasurements which may involve both random and systematic errors acareful study about the suitability of the power control scheme iscarried out.     

Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates

Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO₂ powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13 Ω cm², respectively, when using 3-methoxypropionitrile as the electrolyte solvent. The manufacturing method used lends itself to produce mechanically stable and even-quality electrodes in an easy and fast manner.     

Fabrication of Ni-shims using UV-moulding as an intermediate step

We fabricated nickel-shims including various types of structures with dimensions from hundreds of nanometers to several microns. The mastering process was made by electron-beam lithography, lift-off and reactive ion etching techniques. Then the structures were copied into a UV-curable ORMOCER-material and the Ni-shims were fabricated by electroforming using UV-copies as masters. The experiments showed that the use of UV-copying evades typical quartz master sticking and cracking problems. Furthermore, all features were replicated in the final Ni-shim as they existed in the quartz master proving the method suitable for the fabrication of the Ni-shims from the quartz masters with high precision.     

Susceptibility of Listeria monocytogenes strains to disinfectants and chlorinated alkaline cleaners at cold temperatures

Minimal inhibitory concentration (MIC), suspension and biofilm tests were used in evaluating the disinfecting efficacy of eight commercially available disinfectants and four chlorinated alkaline cleaners against 10 strains of Listeria monocytogenes at refrigerated temperatures. The adaptive response and cross-adaptation of L. monocytogenes to the disinfectants and chlorinated alkaline cleaners were investigated. The bactericidal components in the agents used were chlorine, quaternary ammonium compound (QAC), peracetic acid, ethanol and isopropanol. With some exceptions the disinfectants were efficient against the L. monocytogenes strains. One alkaline hypochlorite containing disinfectant was not efficient in the suspension and MIC tests at the lowest concentration recommended by the manufacturer. The chlorinated alkaline cleaners were effective against L. monocytogenes. A QAC-based disinfectant was found to be the least-effective agent on both glass bead-blasted polyethylene and stainless-steel surfaces. Adaptive and cross-adaptive responses of L. monocytogenes strains were observed towards the QAC-based agent, but over 2-fold increases to other agents were not observed. These results suggest that the adaptive responses of L. monocytogenes to disinfectants or chlorinated alkaline cleaners are of a minor concern.     

Infinite factorization of multiple non-parametric views

Combined analysis of multiple data sources has increasing application interest, in particular for distinguishing shared and source-specific aspects. We extend this rationale to the generative and non-parametric clustering setting by introducing a novel non-parametric hierarchical mixture model. The lower level of the model describes each source with a flexible non-parametric mixture, and the top level combines these to describe commonalities of the sources. The lower-level clusters arise from hierarchical Dirichlet Processes, inducing an infinite-dimensional contingency table between the sources. The commonalities between the sources are modeled by an infinite component model of the contingency table, interpretable as non-negative factorization of infinite matrices, or as a prior for infinite contingency tables. With Gaussian mixture components plugged in for continuous measurements, the model is applied to two views of genes, mRNA expression and abundance of the produced proteins, to expose groups of genes that are co-regulated in either or both of the views. We discover complex relationships between the marginals (that are multimodal in both marginals) that would remain undetected by simpler models. Cluster analysis of co-expression is a standard method of screening for co-regulation, and the two-view analysis extends the approach to distinguishing between pre- and post-translational regulation.     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Insights into corrosion in dye solar cells

The main issue in using low cost metals in dye solar cells is the corrosion caused by the liquid electrolyte. Contrary to typical applications of metals, the adverse effects of corrosion in dye solar cells are related to irreversible depletion of charge carriers from the electrolyte rather than consumption of the metal itself. It is calculated that the penetration rate due to corrosion should not exceed 10⁻⁴ mpy (a couple of nanometers per year) to ensure device lifetime longer than 1 year. This is 10 000 times slower rate than what is considered to be a general benchmark value for very low corrosion rate in the field of corrosion science and has a major effect on how corrosion should be investigated in the case of dye solar cells. Different methods, their applicability, and limitations to investigate corrosion in dye solar cells are evaluated here. The issue with most techniques is that they can detect metals that are clearly corroding, but they have significant limitations in proving a metal stable. Our investigation shows that the most reliable information on corrosion is obtained from complete dye solar cells that are exposed to working conditions. A combination of color analysis of the electrolyte to such measurement is proposed as a means to extrapolate future performance of the cells and estimate potential lifetimes of the dye solar cells in regards to corrosion. Copyright © 2014 John Wiley & Sons, Ltd.