Thermal diffusivity of fluids in a broad region around the critical point

Dynamic light scattering is a suitable method for the investigation of transport properties such as the thermal diffusivity of optically transparent fluids. The main advantages of the method are its quickness, the fact of the thermodynamic state of equilibrium of the sample (gradients are not required), and the relatively simple evaluation of data without the necessity of calibration. However, an insufficient production of intensity of scattered light may be a limiting effect. For that reason the vicinity of the gas-liquid critical point represents the classical range of application. In this paper, it is shown that by means of an appropriate choice of experimental apparatus, measurements are also feasible in an extended range of states. Broad regions around critical points of three pure fluids (sulfur hexafluoride, SF₆; ethane, C₂H₆; nitrous oxide, N₂O) over temperature ranges ¦T-T _c¦ of 0.02 to 50 K and density ranges (/_c) of 0.2 to 2 were investigated. In this region the thermal diffusivity shows great variations with temperature and density and cannot be described by means of ideal-gas behavior or relations for liquids. The measurements were carried out along the coexistence curve for both phases, along the critical isochore and along some isotherms with TT _c. The measured or calculated density, pressure, and thermal diffusivity data as well as some correlations are presented.     

Design and fabrication of a p-i-n photodiode with high responsivity and large alignment tolerances for 40-gb/s applications

This letter demonstrates an evanescently coupled p-i-n photodiode combined with a multimode diluted waveguide using a simple all 2-in InP processing that includes on-wafer mirrors etching and antireflection coating. A high responsivity of 0.81 A/W at 1.55 /spl mu/m with less than 0.4-dB polarization dependence and a large -1-dB vertical alignment tolerance of 2.70 /spl mu/m were achieved simultaneously with a bandwidth of 47 GHz. Stable operation for over 1000 h was obtained under bias stress and temperature at 200/spl deg/C.     

Mechanical properties of continuous bamboo fiber-reinforced biobased polyamide 11 composites

This study is devoted to the analysis of the properties of continuous bamboo fiber (BF)-reinforced polyamide 11 (PA 11) composites. The SEM observations highlighted continuity between BFs and the polymeric matrix showing a high density of hydrogen bonds. The comparative calorimetric study of the matrix and its composites showed that the crystallinity of PA 11 was not modified by the presence of bamboo fibers. The physical aging observed in PA 11 is no more observed in composites due to physical interactions between PA 11 and BFs. The mechanical properties were investigated by tensile strength and dynamic mechanical analysis. The introduction of BFs enhanced Young's modulus of the matrix by a factor of 10. The presence of BFs also improved the storage shear modulus G′ over the whole temperature range. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47623.     

Dielectric relaxations and ferroelectric behaviour of even-odd polyamide PA 6,9

Thermo Stimulated Current (TSC) combined with Dynamic Dielectric Spectroscopy (DDS) have been applied to the investigation of dielectric relaxation modes of an even-odd Polyamide PA 6,9. The correlation between results obtained by both methods allows us to describe precisely the molecular mobility. At high temperature, the various dielectric relaxation phenomena are separated by applying the dielectric modulus formalism. The comparison between the activation enthalpy values obtained by DDS and TSC leads to the assignment of the so-called α mode to cooperative movements of polymeric sequences. Molecular mobility of PA 6,9 is compared with the one of PA 11. The piezoelectric activity of PA 6,9 is shown and analyzed.     

Book reviews

Ohne Zusammenfassung

---

Book reviews

     

Dynamic mechanical behaviour of polyamide 11/Barium titanate ferroelectric composites

Dynamic mechanical analysis and tensile test have been used to characterize the mechanical behaviour of hybrid composites. Barium titanate (BaTiO₃) is the submicron filler and polyamide 11 (PA 11) the matrix. The influence of volume fraction and particles size (ranging from 100 nm to 700 nm) of the inorganic phase on the composites mechanical properties have been checked. BaTiO₃ dispersion in the matrix increases the tensile modulus of the composites and an evolution from ductile to fragile is observed for volume fractions above 12 vol%. The volume fraction dependence of the glassy shear modulus is well described by the Hashin and Shtrikman model indicative of an interaction lack between the organic and inorganic phases. The decrease of the glassy shear modulus with the filler size has been associated with the existence of softer organic/inorganic interfaces, in agreement with the previous hypothesis. The non linear variation of the rubbery modulus versus particles content is well described by the rubber elasticity model applied to a hydrogen bond network.     

Flip‐chip assembly design of an electro‐absorption modulated laser based on EM/circuit comodeling

We designed two kinds of flip‐chip bonded electro‐absorption modulated laser on AlN or Si carrier, working at 100 Gb s^?1. A theoretical comodeling approach based on 3D electromagnetic and circuit simulations has been applied and validated by measurements. As demonstrated, integration and behavior of future complex opto‐electronic modules could be optimized applying such EM‐based approach. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Thermo-mechanical analysis of dental silicone polymers

Soft lining materials are used to replace the inner surface of a conventional complete denture, especially for weak elderly patients, with delicate health who cannot tolerate the hard acrylic denture base. Most of these patients have fragile supporting mucosa, excessive residual ridge resorption, particularly on the mandibular arch. The application of a soft liner to the mandibular denture allows absorbing impact forces during mastication and relieving oral mucosa. Actually, the silicone rubbers constitute the main family of commercialised soft lining materials. This study was conducted to understand the relationships between the mechanical properties and the physical structure of polysiloxanes. For this purpose, a series of polysiloxanes of various chemical compositions have been investigated. The evolution of their physical structure as a function of temperature has been followed by differential scanning calorimetry (DSC). In order to facilitate comparisons, the mechanical modulus has been analysed upon the same heating rate using dynamic mechanical analysis (DMA). Polysiloxanes actually commercialised as soft denture liners are three-dimensional networks: the flexibility of chains allows a crystalline organisation in an amorphous phase leading to the low value of the shear modulus. The dynamic mechanical analysis shows that they are used in the rubbery state. So, polysiloxanes have steady mechanical properties during physiological utilisation.     

Inverse suspension polymerization of sodium acrylate: Synthesis and characterization

Crosslinked Poly(acrylic acid) was synthesized by inverse suspension polymerization. This process was investigated to determine the influence of different parameters like temperature, stirring speed, solution pH, and crosslinker concentration and to obtain the best control of the kinetics. An aqueous phase containing partially neutralized acrylic acid, crosslinking agent, and initiator agent was dispersed in an organic phase and stabilized by a surfactant. The inverse suspension was carried out in heptane as the organic phase with a different ratio of neutralization of the monomer, different crosslinker concentrations, and several stirring speeds. The polymerization was initiated by potassium persulfate (K₂S₂O₈) with N‐N′‐methylenebisacrylamide (MBA_C) as the crosslinker and sorbitan monooleate as the surfactant. The influence of several parameters on the bead size and the swelling capacity was investigated. Particle diameters ranged from 10 to 130 μm. The kinetic results obtained by differential scanning calorimetry showed that conversion and polymerization rates are a function of the solution pH, and they fell when the concentration of the crosslinking agent was higher than 7.5% in the mass of MBA_C. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2621–2630, 2000