Outbreak of trichinosis in France associated with eating horse meat

The investigation of a trichinosis outbreak in Auvergne, France identified 23 cases in 12 households living in two cities-Clermont-Ferrand and Montlu?on-between 15 February and 7 March 1991. One patient required intensive care, 15 had major symptoms, and seven had minor or no symptoms. Two case control studies demonstrated a significant (p < 0.01) association between eating horse meat and acute trichinosis. Veterinary services found that three supermarkets where the patients had bought horse meat during the suspected period had been supplied by a single wholesaler. The analysis of the wholesaler's records revealed that the implicated horse meat had been imported from a slaughterhouse in the United States. This outbreak occurred despite a requirement in France for all meat from horses slaughtered in France and in countries exporting meat to France to be examined systematically for trichinella.     

Energy and resources as production factors in process industries

It is shown that, when the mean productivity of some factors, such as energy or materials, is upperly bounded (a condition usually arising in energy production or in the process industries where energy takes part in physico-chemical processes), the production function may not be convex and, under some further conditions, is concave. Consequences of this model on the economics of energy savings are examined, and it is shown that energy savings may be considered at three levels: in the short run, by action on labour factors: in the medium run, by investment and action on labour factors; in the long run, by technological innovation, investment in new technologies and action on labour factors. Empirical findings along these lines are thus confirmed.     

An efficient and generic extension to ITK to process arbitrary shaped regions of interest

The paper describes a software method to extend ITK (Insight ToolKit, supported by the National Library of Medicine), leading to ITK++. This method, which is based on the extension of the iterator design pattern, allows the processing of regions of interest with arbitrary shapes, without modifying the existing ITK code. We experimentally evaluate this work by considering the practical case of the liver vessel segmentation from CT-scan images, where it is pertinent to constrain processings to the liver area. Experimental results clearly prove the interest of this work: for instance, the anisotropic filtering of this area is performed in only 16 s with our proposed solution, while it takes 52 s using the native ITK framework. A major advantage of this method is that only add-ons are performed: this facilitates the further evaluation of ITK++ while preserving the native ITK framework.     

Experimental Evidence for Seed Metabolic Allometry in Barrel Medic (Medicago truncatula Gaertn.)

Seed size is often considered to be an important trait for seed quality, i.e., vigour and germination performance. It is believed that seed size reflects the quantity of reserve material and thus the C and N sources available for post-germinative processes. However, mechanisms linking seed size and quality are poorly documented. In particular, specific metabolic changes when seed size varies are not well-known. To gain insight into this aspect, we examined seed size and composition across different accessions of barrel medic (Medicago truncatula Gaertn.) from the genetic core collection. We conducted multi-elemental analyses and isotope measurements, as well as exact mass GC–MS metabolomics. There was a systematic increase in N content (+0.17% N mg⁻¹) and a decrease in H content (–0.14% H mg⁻¹) with seed size, reflecting lower lipid and higher S-poor protein quantity. There was also a decrease in ²H natural abundance (δ²H), due to the lower prevalence of ²H-enriched lipid hydrogen atoms that underwent isotopic exchange with water during seed development. Metabolomics showed that seed size correlates with free amino acid and hexoses content, and anticorrelates with amino acid degradation products, disaccharides, malic acid and free fatty acids. All accessions followed the same trend, with insignificant differences in metabolic properties between them. Our results show that there is no general, proportional increase in metabolite pools with seed size. Seed size appears to be determined by metabolic balance (between sugar and amino acid degradation vs. utilisation for storage), which is in turn likely determined by phloem source metabolite delivery during seed development.     

Kinetic study of hydrogen sulfide absorption in aqueous chlorine solution

Hydrogen sulfide (H₂S) is currently removed from gaseous effluents by chemical scrubbing using water. Chlorine is a top-grade oxidant, reacting with H₂S with a fast kinetic rate and enhancing its mass transfer rate. To design, optimize and scale-up scrubbers, knowledge of the reaction kinetics and mechanism is requested. This study investigates the H₂S oxidation rate by reactive absorption in a mechanically agitated gas–liquid reactor. Mass transfer (gas and liquid sides mass transfer coefficients) and hydrodynamic (interfacial area) performances of the gas–liquid reactor were measured using appropriated physical or chemical absorption methods. The accuracy of these parameters was checked by modeling the H₂S absorption in water without oxidant. A sensitivity analysis confirmed the robustness of the model. Finally, reactive absorption of H₂S in chlorine solution for acidic or circumneutral pH allowed to investigate the kinetics of reaction. The overall oxidation mechanism could be described assuming that H₂S is oxidized irreversibly by both hypochlorite anion ClO⁻ (k = 6.75 × 10⁶ L mol⁻¹ s⁻¹) and hypochlorous acid ClOH (k = 1.62 × 10⁵ L mol⁻¹ s⁻¹).     

Geopolymers from Algerian metakaolin. Influence of secondary minerals

The influence of secondary phases (illite, quartz) on the geopolymerization reaction of metakaolin has been investigated by comparing two metakaolins, one prepared from a pure kaolinite and the other from illite- and quartz-containing Algerian kaolin from the Tamazert region, respectively. Geopolymerization was achieved by mixing the metakaolins with an alkaline sodium silicate solution at room temperature and curing at 50 °C. The products were characterized by X-ray diffraction and ²⁹Si and ²⁷Al MAS-NMR. The results show that the secondary phases, at the concentration used in this work, do not prevent the geopolymerization reaction.     

Optical and physical properties of stratospheric aerosols from balloon measurements in the visible and near-infrared domains. 1. Analysis of aerosol extinction spectra from the AMON and SALOMON balloonborne spectrometers

Aerosol extinction coefficients have been derived in the 375-700-nm spectral domain from measurement in the stratosphere since 1992, at night, at mid- and high latitudes from 15 to 40 km, by two balloonborne spectrometers, Absorption par les Minoritaires Ozone et NO(chi) (AMON) and Spectroscopie d'Absorption Lunaire pour l'Observation des Minoritaires Ozone et NO(chi) (SALOMON). Log-normal size distributions associated with the Mie-computed extinction spectra that best fit the measurements permit calculation of integrated properties of the distributions. Although measured extinction spectra that correspond to background aerosols can be reproduced by the Mie scattering model by use of monomodal log-normal size distributions, each flight reveals some large discrepancies between measurement and theory at several altitudes. The agreement between measured and Mie-calculated extinction spectra is significantly improved by use of bimodal log-normal distributions. Nevertheless, neither monomodal nor bimodal distributions permit correct reproduction of some of the measured extinction shapes, especially for the 26 February 1997 AMON flight, which exhibited spectral behavior attributed to particles from a polar stratospheric cloud event.     

RF CMOS body-effect circuits

After a theoretical and analytical study of the body effect in MOS transistors, this paper offers two useful models of this parasitic phenomenon. Thanks to these models, a design methodology, which takes advantage of the bulk terminal, allows to turn this well-known body-effect drawback into an analog advantage, giving thus an efficient alternative to overcome the design constraints of the CMOS VLSI wireless mass market. To illustrate the approach, four RF building blocks are presented. First, a 0.9 V 10 dB gain LNA, covering a frequency range 1.8-2.4 GHz, thanks to a body-effect common mode feedback, is detailed. Secondly, a body-effect linearity controlled pre-power amplifier is presented exhibiting a 5 dB m input compression point (ICP1) variation under 1.8 V power supply for half the current consumption. Lastly, two mixers based on body-effect mixing are presented, which achieve a 10 dB conversion gain under 1.4 V for a −52 dB LO-to-RF isolation. Well suited for low-power/low-voltage applications, these circuits implemented in a 0.18 μm CMOS VLSI technology are dedicated to multi-standard architectures and system-on-chip implementations.     

Traitement du sable bitumineux par micro-ondes

A microwave treatment has been used to extract the hydrocarbons from the bituminous sands; bitumen distillation and cracking were found to result from that treatment. The following factors have been evaluated with respect to their respective effect on the bitumen extraction rate: treatment time, intensity of the microwave field, flow rate and nature of the scrubbing gas, form and position of the sample in the microwave field. The results obtained have enabled to develop a heating system and operating conditions for optimizing the use of microwaves for treating the bituminous sands.     

Theoretical evaluation of the Brillouin threshold and the steady-state Brillouin equations in standard single-mode optical fibers

We first use the nonlocalized, fluctuating source model for the stimulated Brillouin scattering to get the exact spectrum of the Stokes wave in optical fibers with attenuation loss. A new relation for the evaluation of the critical pump power (or Brillouin threshold) depending on the fiber length is then introduced, which should be more precise than the well-known Smith formula. Furthermore, we give for the first time, to the best of our knowledge, an approximate solution for standard steady-state Brillouin equations, which consists of two simple relations.