Development of a Continuous Segmented Flow Tubular Reactor and the “Scale‐out” Concept – In Search of Perfect Powders

The synthesis of powders with controlled shape and narrow particle size distributions is still a major challenge for many industries. A continuous Segmented Flow Tubular Reactor (SFTR) has been developed to overcome homogeneity and scale‐up problems encountered when using batch reactors. Supersaturation is created by mixing the co‐reactants in a micromixer inducing precipitation; the suspension is then segmented into identical micro‐volumes by a non‐miscible fluid and sent through a tube. These micro‐volumes are more homogeneous when compared to large batch reactors leading to narrower size distributions, better particle morphology, polymorph selectivity and stoichiometry. All these features have been demonstrated on single tube SFTR for different chemical systems. To increase productivity for commercial application the SFTR is being “scaled‐out” by multiplying the number of tubes running in parallel instead of scaling‐up by increasing their size. The versatility of the multi‐tube unit will allow changes in type of precipitate with a minimum of new investment as new chemistry can be researched, developed and optimised in a single tube SFTR and then transferred to the multi‐tube unit for powder production.     

Acute Weston Hurst necrotizing hemorrhagic leukoencephalitis

The clinical and pathological findings of a 43-year-old woman, diagnosed as having acute hemorrhagic leukoencephalitis at postmortem examination, are presented. The acute hemorrhagic leukoencephalitis affects mainly young adults and is the most fulminant from of demyelinating disease. It is frequently preceded by a respiratory infection. Diagnosis is facilitated by CT scanning and MRI, which reveal the massive lesion in the cerebral white matter. Many cases terminate fatally in 2 or 4 days, but in others survival is longer. The pathological findings are distinctive.     

Energy and resources as production factors in process industries

It is shown that, when the mean productivity of some factors, such as energy or materials, is upperly bounded (a condition usually arising in energy production or in the process industries where energy takes part in physico-chemical processes), the production function may not be convex and, under some further conditions, is concave. Consequences of this model on the economics of energy savings are examined, and it is shown that energy savings may be considered at three levels: in the short run, by action on labour factors: in the medium run, by investment and action on labour factors; in the long run, by technological innovation, investment in new technologies and action on labour factors. Empirical findings along these lines are thus confirmed.     

An efficient and generic extension to ITK to process arbitrary shaped regions of interest

The paper describes a software method to extend ITK (Insight ToolKit, supported by the National Library of Medicine), leading to ITK++. This method, which is based on the extension of the iterator design pattern, allows the processing of regions of interest with arbitrary shapes, without modifying the existing ITK code. We experimentally evaluate this work by considering the practical case of the liver vessel segmentation from CT-scan images, where it is pertinent to constrain processings to the liver area. Experimental results clearly prove the interest of this work: for instance, the anisotropic filtering of this area is performed in only 16 s with our proposed solution, while it takes 52 s using the native ITK framework. A major advantage of this method is that only add-ons are performed: this facilitates the further evaluation of ITK++ while preserving the native ITK framework.     

Super-low friction of MoS2 coatings in various environments

The ultra-low friction coefficient (typically in the 10⁻² range) of MoS₂-based coatings is generally associated with the friction-induced orientation of ‘easy-shear’ planes of the lamellar structure parallel to the sliding direction, particularly in the absence of environmental reactive gases and with moderate normal loads. We used and AES/XPS ultra-high vacuum tribometer coupled to a preparation chamber, thus allowing the deposition of oxygen-free MoS₂ PVD coatings and the performance of friction tests in various controlled atmospheres. Friction of oxygen-free stoichiometric MoS₂ coatings deposited on AISI 52100 steel was studied in ultra-high vacuum (UHV: 5 × 10⁻⁸ Pa), high vacuum (HV: 10⁻³ Pa), dry nitrogen (10⁵ Pa) and ambient air (10⁵ Pa). ‘Super-low’ friction coefficients below 0.004 were recorded in UHV and dry nitrogen, corresponding to a calculated interfacial shear strength in the range of 1 MPa, about ten times lower than for standard coatings. Low friction coefficients of about 0.013–0.015 were recorded in HV, with interfacial shear strength in the range of 5 MPa. Friction in ambient air leads to higher friction coefficients in the range of 0.2. Surface analysis performed inside the wear scars by Auger electron spectroscopy shows no trace of contaminant, except after friction in ambient air where oxygen and carbon contaminants are observed. In the light of already published results, the ‘super-low’ friction behaviour (10⁻³ range) can be attributed to superlubricity, obtained for a particular combination of cystallographic orientation and the absence of contaminants, leading to a considerable decrease in the interfacial shear strength.     

Kinetic study of hydrogen sulfide absorption in aqueous chlorine solution

Hydrogen sulfide (H₂S) is currently removed from gaseous effluents by chemical scrubbing using water. Chlorine is a top-grade oxidant, reacting with H₂S with a fast kinetic rate and enhancing its mass transfer rate. To design, optimize and scale-up scrubbers, knowledge of the reaction kinetics and mechanism is requested. This study investigates the H₂S oxidation rate by reactive absorption in a mechanically agitated gas–liquid reactor. Mass transfer (gas and liquid sides mass transfer coefficients) and hydrodynamic (interfacial area) performances of the gas–liquid reactor were measured using appropriated physical or chemical absorption methods. The accuracy of these parameters was checked by modeling the H₂S absorption in water without oxidant. A sensitivity analysis confirmed the robustness of the model. Finally, reactive absorption of H₂S in chlorine solution for acidic or circumneutral pH allowed to investigate the kinetics of reaction. The overall oxidation mechanism could be described assuming that H₂S is oxidized irreversibly by both hypochlorite anion ClO⁻ (k = 6.75 × 10⁶ L mol⁻¹ s⁻¹) and hypochlorous acid ClOH (k = 1.62 × 10⁵ L mol⁻¹ s⁻¹).     

Geopolymers from Algerian metakaolin. Influence of secondary minerals

The influence of secondary phases (illite, quartz) on the geopolymerization reaction of metakaolin has been investigated by comparing two metakaolins, one prepared from a pure kaolinite and the other from illite- and quartz-containing Algerian kaolin from the Tamazert region, respectively. Geopolymerization was achieved by mixing the metakaolins with an alkaline sodium silicate solution at room temperature and curing at 50 °C. The products were characterized by X-ray diffraction and ²⁹Si and ²⁷Al MAS-NMR. The results show that the secondary phases, at the concentration used in this work, do not prevent the geopolymerization reaction.     

Optical and physical properties of stratospheric aerosols from balloon measurements in the visible and near-infrared domains. 1. Analysis of aerosol extinction spectra from the AMON and SALOMON balloonborne spectrometers

Aerosol extinction coefficients have been derived in the 375-700-nm spectral domain from measurement in the stratosphere since 1992, at night, at mid- and high latitudes from 15 to 40 km, by two balloonborne spectrometers, Absorption par les Minoritaires Ozone et NO(chi) (AMON) and Spectroscopie d'Absorption Lunaire pour l'Observation des Minoritaires Ozone et NO(chi) (SALOMON). Log-normal size distributions associated with the Mie-computed extinction spectra that best fit the measurements permit calculation of integrated properties of the distributions. Although measured extinction spectra that correspond to background aerosols can be reproduced by the Mie scattering model by use of monomodal log-normal size distributions, each flight reveals some large discrepancies between measurement and theory at several altitudes. The agreement between measured and Mie-calculated extinction spectra is significantly improved by use of bimodal log-normal distributions. Nevertheless, neither monomodal nor bimodal distributions permit correct reproduction of some of the measured extinction shapes, especially for the 26 February 1997 AMON flight, which exhibited spectral behavior attributed to particles from a polar stratospheric cloud event.     

RF CMOS body-effect circuits

After a theoretical and analytical study of the body effect in MOS transistors, this paper offers two useful models of this parasitic phenomenon. Thanks to these models, a design methodology, which takes advantage of the bulk terminal, allows to turn this well-known body-effect drawback into an analog advantage, giving thus an efficient alternative to overcome the design constraints of the CMOS VLSI wireless mass market. To illustrate the approach, four RF building blocks are presented. First, a 0.9 V 10 dB gain LNA, covering a frequency range 1.8-2.4 GHz, thanks to a body-effect common mode feedback, is detailed. Secondly, a body-effect linearity controlled pre-power amplifier is presented exhibiting a 5 dB m input compression point (ICP1) variation under 1.8 V power supply for half the current consumption. Lastly, two mixers based on body-effect mixing are presented, which achieve a 10 dB conversion gain under 1.4 V for a −52 dB LO-to-RF isolation. Well suited for low-power/low-voltage applications, these circuits implemented in a 0.18 μm CMOS VLSI technology are dedicated to multi-standard architectures and system-on-chip implementations.