Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.     

Stability of Y-Ti-O nanoparticles during laser deposition of oxide dispersion strengthened steel powder

This study investigated the feasibility of a direct energy deposition process for fabrication of oxide dispersion strengthened steel cladding. The effect of the laser working power and scan speed on the microstructural stability of oxide nanoparticles in the deposition layer was examined. Y-Ti-O type oxide nanoparticles with a mean diameter of 45 nm were successfully dispersed by the laser deposition process. The laser working power significantly affected nanoparticle size and number density. A high laser power with a low scan speed seriously induced particle coarsening and agglomeration. Compared with bulk oxide dispersion strengthened steel, the hardness of the laser deposition layer was much lower because of a relatively coarse particle and grain size. Formation mechanism of nanoparticles during laser deposition was discussed.     

Thermal properties and adhesion strength of amorphous poly(α‐olefins)/styrene–ethylene–butylene copolymer/terpene hot‐melt adhesive

The thermal stability and adhesion properties, such as lap‐shear strength of hot‐melt adhesives were obtained from amorphous poly(α‐olefins) and thermoplastic rubber [styrene–ethylene–butylene copolymer (SEBS)] blends. The addition of SEBS increased the toughness and viscosity and decreased the lap‐shear strength of the hot‐melt adhesive. Terpene tackifier resin offered enhanced lap‐shear strength; this was more effective when combined tackifier resin was added on the hot‐melt adhesive. Only a small amount of wax and antioxidant affected the thermal stability and lap‐shear strength of the hot‐melt adhesive. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Evolution of Microstructure and Mechanical Properties of Oxide Dispersion Strengthened Steels Made from Water-Atomized Ferritic Powder

Nano-structured oxide dispersion strengthened (ODS) steels produced from a 410L stainless steel powder prepared by water-atomization was studied. The influences of Ti content and milling time on the microstructure and the mechanical properties were analysed. It was found that the ODS steels made from the Si bearing 410L powder contained Y–Ti–O, Y–Ti–Si–O, Y–Si–O, and TiO₂ oxides. Most nanoparticles produced after 80 h of milling were aggregated nanoparticles; however, after 160 h of milling, most aggregated nanoparticles dissociated into smaller individual nanoparticles. Perfect mixing of Y and Ti was not achieved even after the longer milling time of 160 h; instead, the longer hours of milling rather resulted in Si incorporation into the Y–Ti–O rich nanoparticles and a change in the matrix morphology from an equiaxed microstructure to a tempered martensite-like microstructure. The overall micro-hardness of the ODS steel increased with the increase of milling time. After 80 and 160 h, the microhardnesses were over 400 HV, which primarily resulted from the finer dispersed nanoparticles and in part to the formation of martensitic phases. Tensile strength of the 410L ODS steels was comparable with that of ODS steel produced from gas-atomized powder.     

SET/CMOS hybrid process and multiband filtering circuits

We have developed an integration technology for the single electron transistor (SET)/CMOS hybrid systems. SET and CMOS transistors can be optimized without any possible degradation due to mixing dissimilar devices by adopting just one extra mask step for the separate gate oxidation (SGOX). We have confirmed that discrete devices show ideal characteristics required for the SET/CMOS hybrid systems. An SET shows obvious Coulomb oscillations with a 200-mV period and CMOS transistors show high voltage gain. Based on the hybrid process, new hybrid circuits, called periodic multiband filters, are proposed and successfully implemented. The new filter is designed to perform a filtering operation according to the periodic multiple blocking bands of which a period is originated from the SET. Such a novel function was implemented efficiently with a few transistors by making full use of the periodic nature of SET characteristics.     

High temperature deformation behavior of Ti−6Al−4V alloy with and equiaxed microstructure: a neural networks analysis

The hot deformation behavior of Ti−6Al−4V alloy with an equiaxed microstructure was investigated by means of Artificial Neural Networks (ANN). The flow stress data for the ANN model training was obtained from compression tests performed on a thermo-mechanical simulator over a wide range of temperature (from 700°C to 1100°C) with strain rates of 0.0001 s⁻¹ to 100 s⁻¹ and true strains of 0.1 to 0.6. It was found that the trained neural network could reliably predict flow stress for unseen data. Workability was evaluated by means of processing maps with respect to strain, strain rate, and temperature. Processing maps were constructed at different strains by utilizing the flow stress predicted by the model at finer intervals of strain rates and temperatures. The specimen failures at various instances were predicted and confirmed by experiments. The results establish that artificial neural networks can be effectively used for generating a more reliable processing map for industrial applications. A graphical user interface was designed for ease of use of the model.     

Clinical efficacy of amniotic membrane transplantation in the treatment of various ocular surface diseases.

PURPOSE: To investigate the efficacy of permanent amniotic membrane transplantation (AMT) for the treatment of various ocular surface diseases. METHODS: The medical records of 62 eyes from 58 patients who had undergone permanent AMT were reviewed. The amniotic patches were grafted for the treatment of neurotrophic ulcers (n=15), inflammatory corneal ulcers (n=15), scleral ulcers (n=11), painful bullous keratopathy (n=8) and pterygium as an adjuvant to a conjunctival autograft (n=13). Cryo-preserved or freeze-dried amniotic membrane (AM) were used. The overall success rate, the interval to epithelialization, pain-subsiding time, and complications were evaluated. The pain relief and the full epithelialization interval in the bullous keratopathy patients given the cryo-preserved AM were compared with those given the freeze-dried AM. RESULTS: The success rate in the patients with neurotrophic ulcer, inflammatory corneal ulcer, scleral ulcer and bullous keratopathy were 93.3%, 66.7%, 92.9% and 100%, respectively. A conjunctival autograft with AMT showed a 100% success rate without recurrence. The time to re-epithelialization was 24.4+/-24.2, 20.4+/-5.8, and 16.9+/-7.0 days in patients with neurotrophic, inflammatory and scleral ulcers, respectively (p=0.431). The pain relief interval in the cryo-preserved and freeze-dried AM group was 17.7 and 23.3 days, and the re-epithelialization interval was 29 and 22 days, respectively, which was insignificant. CONCLUSIONS: AMT has a high success in the treatment of neurotrophic, scleral ulcer, bullous keratopathy and pterygium with a low rate of complications but presented only partial success in the treatment of inflammatory corneal ulcers. The clinical efficacy of AMT was not related to the methods used to preserve the AM.     

Removal of zinc ions in wastewater by electrodialysis

To obtain useful data for treatment of the wastewater discharged from zinc electroplating processes, we investigated the effects of operating parameters, such as the initial concentration of dilute solution, the flow velocity and the applied voltage, on removal rate of Zn²⁺ in the model solutions using an electrodialysis system. Zinc ions in the solutions were effectively removed by the electrodialyzer with CMX cation exchange membranes and AMX anion exchange membranes. The initial concentration of dilute solution, the flow velocity and the applied voltage strongly affected the performance of the electrodialysis system. As the initial concentration of dilute solution, the flow velocity and the applied voltage were increased, the removal ratio was increased. The energy consumption was increased as the initial concentration of dilute solution and the applied voltage were increased, whereas the effect of the flow velocity on the energy consumption was negligible.     

Optimisation of tripalmitin‐rich fractionation from palm stearin by response surface methodology

BACKGROUND: Solvent fractionation is effective in improving separation at low temperature, resulting in higher yield and purity of the final product. Tripalmitin (PPP) is an important substrate for the synthesis of human milk fat substitute (HMFS). In this study a fraction rich in PPP was separated from palm stearin by solvent fractionation. RESULTS: The PPP‐rich fraction was concentrated from palm stearin by acetone fractionation. Response surface methodology (RSM) was employed to optimise PPP purity (Y₁, %) and PPP content (Y₂, g kg^?1 palm stearin) with the independent variables fractionation temperature (X₁, 25, 30 and 35 °C) and weight ratio of palm stearin to acetone (X₂, 1:3, 1:6 and 1:9). The predictive models for PPP purity and PPP content of the solid fraction were adequate and reproducible, with no significant lack of fit and satisfactory levels of R². PPP purity showed a positive correlation with temperature and acetone ratio, whereas PPP content exhibited a negative correlation. The optimised fractionation condition for a targeted PPP‐rich fraction with > 92% PPP purity and > 225 g kg^?1 PPP content from palm stearin was predicted. CONCLUSION: The RSM model for optimising PPP purity and PPP content in the PPP‐rich fraction from palm stearin by acetone fractionation was valid. The scaled‐up PPP‐rich fraction obtained can be used as a substrate for the synthesis of 1,3‐dioleoyl‐2‐palmitoylglycerol, which is a main component of HMFS in infant formulas. Copyright © 2010 Society of Chemical Industry