Electrochemical studies of octadecanethiol and octanethiol films on variable surface area mercury sessile drops

Octadecanethiol (ODT) and octanethiol (OT) films at the mercury-electrolyte interface are examined using cyclic voltammetry and differential capacitance measurements at a single frequency. A mercury flow-system is used to alter the volume, and therefore, the surface area and surface pressure of the mercury electrode. Manipulation of the mercury electrode's volume enables the introduction and removal of defects in the insulating thiol films. OT and ODT film behavior are contrasted under conditions of expansion and contraction. ODT forms extremely impermeable layers that allow 1000 time less redox probe current than seen on uncoated drops. Expansion of the mercury electrode to increase the electrode surface area produces defects and pinholes in the thiol film. These defects are almost completely removed when the drop is compressed back to its initial surface area. OT also forms insulating films on mercury sessile drops, however these films contain more defects than ODT films. While expansion of an OT-coated mercury drop increases redox probe current, recompression of the drop does not return the film to its initial condition. Pinholes and defects in the OT and ODT films can also be produced by cycling to negative potentials, which produce abrupt stripping peaks.     

Online segmentation of time series based on polynomial least-squares approximations

The paper presents SwiftSeg, a novel technique for online time series segmentation and piecewise polynomial representation. The segmentation approach is based on a least-squares approximation of time series in sliding and/or growing time windows utilizing a basis of orthogonal polynomials. This allows the definition of fast update steps for the approximating polynomial, where the computational effort depends only on the degree of the approximating polynomial and not on the length of the time window. The coefficients of the orthogonal expansion of the approximating polynomial-obtained by means of the update steps-can be interpreted as optimal (in the least-squares sense) estimators for average, slope, curvature, change of curvature, etc., of the signal in the time window considered. These coefficients, as well as the approximation error, may be used in a very intuitive way to define segmentation criteria. The properties of SwiftSeg are evaluated by means of some artificial and real benchmark time series. It is compared to three different offline and online techniques to assess its accuracy and runtime. It is shown that SwiftSeg-which is suitable for many data streaming applications-offers high accuracy at very low computational costs.     

Stepwise dissection and visualization of the catalytic mechanism of haloalkane dehalogenase LinB using molecular dynamics simulations and computer graphics

The different steps of the dehalogenation reaction carried out by LinB on three different substrates have been characterized using a combination of quantum mechanical calculations and molecular dynamics simulations. This has allowed us to obtain information in atomic detail about each step of the reaction mechanism, that is, substrate entrance and achievement of the near-attack conformation, transition state stabilization within the active site, halide stabilization, water molecule activation and subsequent hydrolytic attack on the ester intermediate with formation of alcohol, and finally product release. Importantly, no bias or external forces were applied during the whole procedure so that both intermediates and products were completely free to sample configuration space in order to adapt to the plasticity of the active site and/or search for an exit. Differences in substrate reactivity were found to be correlated with the ease of adopting the near-attack conformation and two different exit pathways were found for product release that do not interfere with substrate entrance. Additional support for the different entry and exit pathways was independently obtained from an examination of the enzyme's normal modes.     

Variable narrowband transmission filters with a wide rejection band for spectrometry

Variable narrowband transmission filters are useful for the development of compact spectrometers. For this purpose the filter should be directly coupled to the detector and the wavelength of the transmission peak should move in one surface direction over a length of a few millimeters. To obtain both a wide measurement spectrum and high accuracy, the ratio of extreme operating wavelengths is required to be greater than 2:1 and the width of the transmission band narrower than 10 nm. A metal-dielectric variable transmission filter, with an operating range of 400-1000 nm, is proposed. The method for obtaining variable transmission filters, with dimensions of a few millimeters, is described.     

On the existence of chaos in the electronically adjustable structures of the state variable filters

As demonstrated in the paper, chaotic motion can appear in state variable filters, that is, common network structures dedicated for analog signal processing. In particular, two Kerwin–Huelsman–Newcomb biquadratic filtering sections are considered for theoretical, numerical and experimental analysis. Mathematical models are designed, and conditions for evolution of typical strange attractors are provided. The corresponding largest Lyapunov exponent is calculated and visualized as a function of internal system parameters and the shape of input harmonic waveform. Mutual connection between the mathematical model and the real lumped electronic circuit is discussed in detail. Copyright © 2016 John Wiley & Sons, Ltd.     

Methacrylate hydrogels reinforced with bacterial cellulose

Composite hydrogels consisting of nanofibrous bacterial cellulose (BC) embedded in a biocompatible polymeric matrix of various methacrylates were synthesized by UV polymerization using the ‘ever‐wet’ technique. The effect of monomer(s) type and ratio, system dilution at polymerization, monomer(s) hydrophilicity, crosslink density and cellulose/hydrogel ratio was investigated. The effect of BC reinforcement on equilibrium swelling depends on whether the neat gel swells more when brought into contact with water. The major improvement achieved by introduction of 1%–2% BC concerns mechanical properties. Compared with neat gels, the storage shear modulus G′ increased by a factor 10‐20, and the loss part G″ also rose significantly. The compression modulus ranged from 2 to 5.5 MPa for composites swollen to equilibrium (20‐70 wt% water). The BC‐hydrogel composites are considered for application in the tissue engineering area. Copyright © 2012 Society of Chemical Industry     

Interaction of Cucurbit[7]uril with Oxime K027, Atropine,and Paraoxon: Risky or Advantageous Delivery System?

Antidotes against organophosphates often possess physicochemical properties that mitigate their passage across the blood–brain barrier. Cucurbit[7]urils may be successfully used as a drug delivery system for bisquaternary oximes and improve central nervous system targeting. The main aim of these studies was to elucidate the relationship between cucurbit[7]uril, oxime K027, atropine, and paraoxon to define potential risks or advantages of this delivery system in a complex in vivo system. For this reason, in silico (molecular docking combined with umbrella sampling simulation) and in vivo (UHPLC—pharmacokinetics, toxicokinetics; acetylcholinesterase reactivation and functional observatory battery) methods were used. Based on our results, cucurbit[7]urils affect multiple factors in organophosphates poisoning and its therapy by (i) scavenging paraoxon and preventing free fraction of this toxin from entering the brain, (ii) enhancing the availability of atropine in the central nervous system and by (iii) increasing oxime passage into the brain. In conclusion, using cucurbit[7]urils with oximes might positively impact the overall treatment effectiveness and the benefits can outweigh the potential risks.     

Elimination of irreversible effects during first charging of lithium battery anodes

The irreversible capacity of negative electrode in a lithium-ion cell is a widely described the phenomenon. Irreversible capacity losses are connected with formation of a solid electrolyte interface layer. This layer is growing on the electrode-electrolyte interface during first several charging cycles. The layer is indispensable for proper functioning of a lithium-ion cell. However, during this layer formation, the atoms of lithium are consumed in a range from 18 to 45% of the total amount of lithium atoms presented in cell. Demonstration of possibilities to suppress this phenomenon that occurs on a negative electrode interface is the main aim of this paper.     

Mycotoxin exposure and human cancer risk: A systematic review of epidemiological studies

In recent years, there has been an increasing interest in investigating the carcinogenicity of mycotoxins in humans. This systematic review aims to provide an overview of data linking exposure to different mycotoxins with human cancer risk. Publications (2019 and earlier) of case–control or longitudinal cohort studies were identified in PubMed and EMBASE. These articles were then screened by independent reviewers and their quality was assessed according to the Newcastle–Ottawa scale. Animal, cross‐sectional, and molecular studies satisfied criteria for exclusion. In total, 14 articles were included: 13 case–control studies and 1 longitudinal cohort study. Included articles focused on associations of mycotoxin exposure with primary liver, breast, and cervical cancer. Overall, a positive association between the consumption of aflatoxin‐contaminated foods and primary liver cancer risk was verified. Two case–control studies in Africa investigated the relationship between zearalenone and its metabolites and breast cancer risk, though conflicting results were reported. Two case–control studies investigated the association between hepatocellular carcinoma and fumonisin B1 exposure, but no significant associations were observed. This systematic review incorporates several clear observations of dose‐dependent associations between aflatoxins and liver cancer risk, in keeping with IARC Monograph conclusions. Only few human epidemiological studies investigated the associations between mycotoxin exposures and cancer risk. To close this gap, more in‐depth research is needed to unravel evidence for other common mycotoxins, such as deoxynivalenol and ochratoxin A. The link between mycotoxin exposures and cancer risk has mainly been established in experimental studies, and needs to be confirmed in human epidemiological studies to support the evidence‐based public health strategies.