ConClass: a framework for real-time distributed knowledge-basedprocessing

We have developed a problem-solving framework, called ConClass, that is capable of classifying continuous real-time problems dynamically and concurrently on a distributed system. ConClass provides an efficient development environment for describing and decomposing a classification problem and synthesizing solutions. In ConClass, decomposed concurrent subproblems specified by the application developer effectively correspond to the actual distributed hardware elements. This scheme is useful for designing and implementing efficient distributed processing, making it easier to anticipate and evaluate system behavior. The ConClass system provides an object replication feature that prevents any particular object from being overloaded. In order to deal with an indeterminate amount of problem data, ConClass dynamically creates object networks that justify hypothesized solutions, and thus achieves a dynamic load distribution. A number of efficient execution mechanisms that manage a variety of asynchronous aspects of distributed processing have been implemented without using schedulers or synchronization schemes that are liable to develop bottlenecks. We have confirmed the efficiency of parallel distributed processing and load balancing of ConClass with an experimental application     

Concentration of docosahexaenoic acid in glyceride by hydrolysis of fish oil withcandida cylindracea lipase

In an attempt to concentrate the content of DHA (docosahexaenoic acid) in a glyceride mixture containing triglyceride, diglyceride and monoglyceride, fish oil was hydrolyzed with six kinds of microbial lipase. After the hydrolysis, free fatty acid was removed and fatty acid components of the glyceride mixtures were analyzed. When the hydrolysis withCandida cylindracea lipase was 70% complete, the DHA content in the glyceride mixture was three times more than that in the original fish oil. The EPA (eicosapentaenoic acid) content became almost 70% of the original fish oil. Hydrolysis with other lipases did not result in an increase in the DHA content in the glyceride mixtures. Hydrolysis of DHA-rich tuna oil (DHA content is about 25%) withCandida cylindracea lipase resulted in 53% DHA in the glyceride mixture. The EPA content, however, remained close to that of the original tuna oil. In this report, the acyl chain specificity of lipases is evaluated in terms of hydrolysis resistant value (HRV). HRV is the ratio between the DHA contents in the glyceride mixture of hydrolyzed oil and original oil. HRV clearly indicates differences in hydrolysis between DHA and other fatty acids (e.g., saturated and monoenoic acids).     

Preparation and characterization of membranes with positively charged main chain from polyethylenimine

A membrane, which has positively charged groups in the polymer main chain, was prepared from polyethylenimine by crosslinking and successive alkylation. Dibromoalkane was used as a crosslinking agent. The crosslinked membrane was alkylated using methyl iodide under several conditions. Elemental and ICP emission analyses were introduced to measure the rates of alkylation and quaternization. From the membrane potential measurement, the effective charge density was estimated. The highest value was about 1.0 M, which was obtained by a prolonged alkylation time. This value was larger than that of some commercial ion exchange membranes. The effective charge density, which was obtained by the last alkylation procedure, was 10 times larger than that of the former one, though the rate of quaternizing increased by less than a factor of two. This implies that the activity constant in the membrane increased when the charge density is increased. © 1993 John Wiley & Sons, Inc.     

Physicochemical properties of rare earth perovskite oxides used as gas sensor material

The change of the conductivity in the rare earth perovskite oxide took place after the chemisorption of flammable gases. The sensitivity for methanol was highest. From the conductivity change of these perovskite oxides after the injection of methanol, the energy needed to promote an electron from a conducting to a nonconducting state, E=E _c-E _t, could be derived from the equation=A ₀ exp (–E/kT). LnCoO₃ had the smallest E and H (metal-O), which is the binding energy of oxygen coordinating to the metal ions, but exhibited the highest activity for gas sensing. The gas sensing mechanism was also considered.     

Radiation grafting of α,β,β-trifluoroethylenesulfonyl fluoride onto low-density polyethylene film by simultaneous irradiation method. I. Kinetic study of simultaneous-irradiation grafting

α,β,β-Trifluoroethylenesulfonyl fluoride (TFESF) was grafted onto polyethylene (PE) film by a simultaneous-irradiation method. The influences of the grafting conditions were analyzed kinetically. The dependencies of the grafting rate on the dose rates and monomer concentrations ranging from 10 to 75% were found to be of 1 and 0 order, respectively. The overall activation energy for the graft polymerization was 2.05 × 10⁴ J/mol. The grafting rate was found to be independent of the film thicknesses ranging from 25 to 100 μm.     

Effects of 4He impurities on 3He nuclear spin-lattice relaxation in hcp solid 3He

Nuclear spin-lattice relaxation properties of hcp solid ³He with ⁴He impurities have been studied. At temperatures below the exchange plateau region, three kinds of relaxation time were observed. To analyze the data, a phenomenological four-bath model was developed, the four baths being the Zeeman bath, the phonon bath, an X-bath, and a Y-bath. The X-bath consists of the exchange bath and a part of the ⁴He-⁴He elastic interaction bath. The Y-bath is the main part of the elastic interaction bath. We measured the concentration dependence of the energy constants of all the baths, as well as the temperature and concentration dependences of the three kinds of relaxation time. The relaxation behavior corresponding to the process between the X-bath and the Y-bath could not be expressed by a single exponential function of time and the relaxation rate was strongly dependent on the concentration. This process may be related to the internal thermal equilibrium process within the elastic interaction bath. The impurity-dependent relaxation time between the X-bath and the phonon bath had a temperature dependence of T ^–n with n = 7.4±0.3.     

Electrochemical analysis of zincate treatments for Al and Al alloy films

Electrochemical behavior of Al and Al alloy films in zincate solution was investigated to elucidate the effect of the zincate pretreatment for electroless NiP deposition, which is used for under bump metallization for LSI interconnects. The immersion potential for AlCu and AlSiCu, immediately reached to constant, which was almost equal potential to zinc reference electrode. The corrosion current for the AlCu and AlSiCu films was larger than that of the Al and AlSi films in the zincate solution. It was also confirmed that the deposited Zn at the surface of AlCu and AlSiCu films possessed smaller grain size and larger amount of nucleation, resulted in the formation of flat NiP films.