Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Bioactive ceramic scaffolds for bone regeneration consisting of a three-dimensional mesh of interpenetrating struts with square section were fabricated via Digital Light Processing (DLP). The ability of the technique to manufacture 3D porous structures from β-tricalcium phosphate (β-TCP) powders with different dimensions of struts and pores was evaluated, identifying the possibilities and limitations of the manufacturing process. Small pore sizes were found to seriously complicate the elimination of excess slurry from the scaffold’s innermost pores. The effect of the strut/pore size on the mechanical performance of the scaffolds under compressive stresses was also evaluated, but no significant influence was found. Under compressive stresses, the structures resulted weaker when tested perpendicularly to the printing plane due to interlayer shear failure. Interlayer superficial grooves are proposed as potential failure-controlling defects, which could also explain the lack of a Weibull size effect on the mechanical strength of the fabricated DLP scaffolds.     

Efficient primal-dual heuristic for a dynamic location problem

In this paper the dynamic location problem with opening, closure and reopening of facilities is formulated and an efficient primal-dual heuristic that computes both upper and lower limits to its optimal solution is described. The problem here studied considers the possibility of reconfiguring any location more than once over the planning horizon. This problem is NP-hard (the simple plant location problem is a special case of the problem studied). A primal-dual heuristic based on the work of Erlenkotter [A dual-based procedure for uncapacitated facility location. Operations Research 1978;26:992–1009] and Van Roy and Erlenkotter [A dual-based procedure for dynamic facility location. Management Science 1982;28:1091–105] was developed and tested over a set of randomly generated test problems. The results obtained are quite good, both in terms of the quality of lower and upper bounds calculated as in terms of the computational time spent by the heuristic. A branch-and-bound procedure that enables to optimize the problem is also described and tested over the same set of randomly generated problems.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

The Chick Chorioallantoic Membrane Model: A New In Vivo Tool to Evaluate Breast Cancer Stem Cell Activity

The high plasticity of cancer stem-like cells (CSCs) allows them to differentiate and proliferate, specifically when xenotransplanted subcutaneously into immunocompromised mice. CSCs are highly tumorigenic, even when inoculated in small numbers. Thus, in vivo limiting dilution assays (LDA) in mice are the current gold standard method to evaluate CSC enrichment and activity. The chick embryo chorioallantoic membrane (CAM) is a low cost, naturally immune-incompetent and reproducible model widely used to evaluate the spontaneous growth of human tumor cells. Here, we established a CAM-LDA assay able to rapidly reproduce tumor specificities—in particular, the ability of the small population of CSCs to form tumors. We used a panel of organotropic metastatic breast cancer cells, which show an enrichment in a stem cell gene signature, enhanced CD44⁺/CD24^−/low cell surface expression and increased mammosphere-forming efficiency (MFE). The size of CAM-xenografted tumors correlate with the number of inoculated cancer cells, following mice xenograft growth pattern. CAM and mice tumors are histologically comparable, displaying both breast CSC markers CD44 and CD49f. Therefore, we propose a new tool for studying CSC prevalence and function—the chick CAM-LDA—a model with easy handling, accessibility, rapid growth and the absence of ethical and regulatory constraints.     

P16 and HPV Genotype Significance in HPV-Associated Cervical Cancer—A Large Cohort of Two Tertiary Referral Centers

The expression of p16 is a good surrogate of human papillomavirus (HPV) infection in HPV-associated cancers. The significance of p16 expression, HPV genotype and genera in the outcome of patients with HPV-associated cervical cancer (CC) is unclear. Our aim is to ascertain the prognostic significance of these factors. Data from 348 patients (median age: 47.5 years old) with CC, diagnosed in two referral centers, were retrospectively collected. Advanced disease (FIGO2018 IB2-IV) was present in 68% of patients. A single HPV genotype was identified in 82.8% of patients. The most common HPVs were HPV16 (69%) and HPV18 (14%). HPV genera reflected this distribution. HPV16 tumors presented at an earlier stage. P16 was negative in 18 cases (5.2%), 83.3% of which were squamous cell carcinomas. These cases occurred in older patients who tended to have advanced disease. In the univariate analysis, HPV16 (HR: 0.58; p = 0.0198), α-9 genera (HR: 0.37; p = 0.0106) and p16 overexpression (HR: 0.54; p = 0.032) were associated with better survival. HPV16 (HR: 0.63; p = 0.0174) and α-9 genera (HR: 0.57; p = 0.0286) were associated with less relapse. In the multivariate analysis, only the International Federation of Gynecology and Obstetrics (FIGO) stage retained an independent prognostic value. HPV16, α-9 genera and p16 overexpression were associated with better survival, although not as independent prognostic factors. Patients with p16-negative HPV-associated CC were older, presented with advanced disease and had worse prognosis.     

Impact of white-matter mask selection on DTI histogram-based metrics as potential biomarkers in cerebral small vessel disease

Magnetic Resonance Materials in Physics, Biology and Medicine - Histogram-based metrics extracted from diffusion-tensor imaging (DTI) have been suggested as potential biomarkers for cerebral small...     

Exploring educational immersive videogames: an empirical study with a 3D multimodal interaction prototype

ABSTRACT

Gestural interaction devices emerged and originated various studies on multimodal human–computer interaction to improve user experience (UX). However, there is a knowledge gap regarding the use of these devices to enhance learning. We present an exploratory study which analysed the UX with a multimodal immersive videogame prototype, based on a Portuguese historical/cultural episode. Evaluation tests took place in high school environments and public videogaming events. Two users would be present simultaneously in the same virtual reality (VR) environment: one as the helmsman aboard Vasco da Gama’s fifteenth-century Portuguese ship and the other as the mythical Adamastor stone giant at the Cape of Good Hope. The helmsman player wore a VR headset to explore the environment, whereas the giant player used body motion to control the giant, and observed results on a screen, with no headset. This allowed a preliminary characterisation of UX, identifying challenges and potential use of these devices in multi-user virtual learning contexts. We also discuss the combined use of such devices, towards future development of similar systems, and its implications on learning improvement through multimodal human–computer interaction.     

Encoding Cryptographic Primitives in a Calculus with Polyadic Synchronisation

We thoroughly study the behavioural theory of epi, a ??-calculus extended with polyadic synchronisation. We show that the natural contextual equivalence, barbed congruence, coincides with early bisimilarity, which is thus its co-inductive characterisation. Moreover, we relate early bisimilarity with the other usual notions, ground, late and open, obtaining a lattice of equivalence relations that clarifies the relationship among the ??standard?? bisimilarities. Furthermore, we apply the theory developed to obtain an expressiveness result: epi extended with key encryption primitives may be fully abstractly encoded in the original epi calculus. The proposed encoding is sound and complete with respect to barbed congruence; hence, cryptographic epi (crypto-epi) gets behavioural theory for free, which contrasts with other process languages with cryptographic constructs that usually require a big effort to develop such theory. Therefore, it is possible to use crypto-epi to analyse and to verify properties of security protocols using equational reasoning. To illustrate this claim, we prove compliance with symmetric and asymmetric cryptographic system laws, and the correctness of a protocol of secure message exchange.     

IMPLEMENTING ENVIRONMENTAL FLOWS IN COMPLEX WATER RESOURCES SYSTEMS – CASE STUDY: THE DUERO RIVER BASIN,SPAIN

European river basin authorities are responsible for the implementation of the new river basin management plans in accordance with the European Water Framework Directive. This paper presents a new methodology framework and approach to define and evaluate environmental flow regimes in the realistic complexities that exist with multiple water resource needs at a basin scale. This approach links river basin simulation models and habitat time series analysis to generate ranges of environmental flows (e‐flows), which are evaluated by using habitat, hydropower production and reliability of water supply criteria to produce best possible alternatives. With the use of these tools, the effects of the proposed e‐flows have been assessed to help in the consultation process. The possible effects analysed are impacts on water supply reliability, hydropower production and aquatic habitat. After public agreements, a heuristic optimization process was applied to maximize e‐flows and habitat indicators, while maintaining a legal level of reliability for water resource demands. The final optimal e‐flows were considered for the river basin management plans of the Duero river basin. This paper demonstrates the importance of considering quantitative hydrologic and ecological aspects of e‐flows at the basin scale in addressing complex water resource systems. This approach merges standard methods such as physical habitat simulations and time series analyses for evaluating alternatives, with recent methods to simulate and optimize water management alternatives in river networks. It can be integrated with or used to complement other frameworks for e‐flow assessments such as the In‐stream Flow Incremental Methodology and Ecological Limits of Hydrologic Alteration. Copyright © 2011 John Wiley & Sons, Ltd.