Spanish Melon Landraces: Revealing Useful Diversity by Genomic,Morphological, and Metabolomic Analysis

Spain is a secondary centre of the diversification of the melon (Cucumis melo L.), with high diversity represented in highly appreciated landraces belonging to the Flexuosus and Ibericus groups. A collection of 47 accessions of Flexuosus, Chate, Piel de Sapo, Tendral, Amarillo, Blanco, and Rochet was analysed using a genotyping-by-sequencing (GBS) approach. A total of 66,971 quality SNPs were identified. Genetic analysis differentiated Ibericus accessions and exotic materials (Ameri, Momordica, Kachri, and Agrestis), while Flexuous accessions shared ancestry between them. Within the Ibericus group, no clear genomic distinction could be identified for the different landraces evaluated, with accessions of different landraces showing high genetic similarity. The morphological characterization confirmed that the external colour and fruit shape had been used as recognition patterns for Spanish melon landraces, but variability within a landrace exists. Differences were found in the sugars and acid and volatile profiles of the materials. Flexuosus and Chate melons at the immature commercial stage accumulated malic acid and low levels of hexoses, while Ibericus melons accumulated high contents of sucrose and citric acid. Specific trends could be identified in the Ibericus landraces. Tendral accumulated low levels of sugars and citric acid and high of malic acid, maintaining higher firmness, Rochet reached higher levels of sugars, and Amarillo tended to lower malic acid contents. Interestingly, high variability was found within landraces for the acidic profile, offering possibilities to alter taste tinges. The main volatile organic compounds (VOCs) in Flexuosus and Chate were aldehydes and alcohols, with clear differences between both groups. In the Ibericus landraces, general trends for VOC accumulation could be identified, but, again, a high level of variation exists. This situation highlights the necessity to develop depuration programs to promote on-farm in situ conservation and, at the same time, offers opportunities to establish new breeding program targets and to take advantage of these sources of variation.     

Output feedback and dynamical sliding-mode control of power converters

Using the underlying idea of the most widely accepted controller for power converters, the current-mode control, a new dynamical and sliding-mode control for dc–dc power converters, is proposed. The controller requires only voltage measurements; is easy to design; is robust under load and input voltage variations, exhibits fast response and does not depend on the load (although a knowledge of the load range is necessary to tune the controller). In spite of these features, it can be easily implemented using standard electronics components. The stability analysis is carried out using the discontinuous (large signal) nonlinear model. This analysis provides a set of controller admissible parameters to keep closed-loop system stability.     

Metal Organic Framework Crystals in Mixed‐Matrix Membranes: Impact of the Filler Morphology on the Gas Separation Performance

Mixed‐matrix membranes comprising NH₂‐MIL‐53(Al) and Matrimid or 6FDA‐DAM have been investigated. The metal organic framework (MOF) loading has been varied between 5 and 20 wt%, while NH₂‐MIL‐53(Al) with three different morphologies, nanoparticles, nanorods, and microneedles has been dispersed in Matrimid. The synthesized membranes have been tested in the separation of CO₂ from CH₄ in an equimolar mixture. At 3 bar and 298 K for 8 wt% MOF loading, incorporation of NH₂‐MIL‐53(Al) nanoparticles leads to the largest improvement compared to nanorods and microneedles. The incorporation of the best performing filler, i.e., NH₂‐MIL‐53(Al) nanoparticles, into the highly permeable 6FDA‐DAM has a larger effect, and the CO₂ permeability increases up to 85% with slightly lower selectivities for 20 wt% MOF loading. Specifically, these membranes have a permeability of 660 Barrer with a CO₂/CH₄ separation factor of 28, leading to a performance very close to the Robeson limit of 2008. Furthermore, a new non‐destructive technique based on Raman spectroscopy mapping is introduced to assess the homogeneity of the filler dispersion in the polymer matrix. The MOF contribution can be calculated by modeling the spectra. The determined homogeneity of the MOF filler distribution in the polymer is confirmed by focused ion beam scanning electron microscopy analysis.     

ARP-P4: deep analysis of a hybrid SDN ARP-Path/P4Runtime switch

Telecommunication Systems - The Software-Defined Networking (SDN) architecture decouples the control plane from the data plane, but it does not explicitly state where the control should be located....     

Opportunistic interference management: a new approach for multiantenna downlink cellular networks

A new approach for multiantenna broadcast channels in cellular networks based on multiuser diversity concept is introduced. The technique called opportunistic interference management achieves dirty paper coding capacity asymptotically with minimum feedback required. When there are K antennas at the base station with M mobile users in the cell, the proposed technique only requires K integer numbers related to channel state information between mobile users and base station. The encoding and decoding complexity of this scheme is the same as that of point‐to‐point communications, which makes the implementation of this technique easy. An antenna selection scheme is proposed at the base station to reduce the minimum required mobile users significantly at the expense of reasonable increase in feedback. In order to guarantee fairness, a new algorithm is presented that incorporates opportunistic interference management into existing Global System for Mobile communications (GSM) standard. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface copper enrichment by reduction of copper chromite catalyst employed for carbon monoxide oxidation

The effect of prereduction on CO oxidation activity of unsupported copper-chromite oxide catalysts was examined. Results were found to be in good agreement with two mechanisms for a surface copper enrichment due to CO prereduction which produced an activity increase in the copper-chromite catalyst.     

Click‐ligation of coumarin to polyether polyols for polyurethane foams

A simple strategy for the synthesis and functionalization of polyurethanes is described. Anionic ring‐opening polymerization was combined with ‘click’ chemistry to synthesize polyols with fluorescent properties. This route allows the incorporation of a wide range of functionalities in the polyols with an easy, clean and highly selective process compatible with several types of functional groups. The proposed strategy opens the way to the production, in a cost‐effective way, of ‘smart’ polyurethanes with non‐conventional properties like fire retardancy, antimite properties, antibacterial properties, etc. Alkynyl groups were introduced into the polyol chains by the controlled addition of glycidyl propargyl ether as co‐monomer during a conventional anionic ring‐opening copolymerization with propylene oxide. Subsequently 4‐azidomethyl‐7‐methoxycoumarin molecules were introduced onto the alkynyl‐polyether polyols by copper‐catalysed cycloaddition reactions to produce end‐functionalized polyols. The chemical structure of the novel polyols was characterized using infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography with triple detection and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopy. These characterization techniques confirmed the presence of a considerable amount of functional groups in the structure of the polyols. Finally, various fluorescent rigid foams, based on the functionalized polyols, were synthesized. Copyright © 2012 Society of Chemical Industry     

Alumina and Alumina/Zirconia Multilayer Composites Obtained by Slip Casting

The slip casting technique has been revealed as a powerful method to obtain multilayer composites close to theoretical density. From zeta potential and viscosity measurements of Al₂O₃ and Al₂O₃/ZrO₂ (4 vol% ZrO₂) suspensions, the corditions for the preparation of multilayer composites by slip casting have been determined. A microstructural analysis of the different layers by scanning electron microscopy is also reported.     

Single-channel EEG measurement of engagement in virtual rehabilitation: a validation study

Virtual Reality - Stroke rehabilitation suffers from low levels of patient engagement, impeding recovery. Virtual rehabilitation (VR) approaches can improve patient outcomes; however, there is...