Solid state transformations of Au-Cu-Pt alloys studied by in-situ X-ray synchrotron radiation and DSC

Seven alloys of the ternary Au-Cu-Pt system, containing 75 or 76.5 wt.% Au with 0–15 wt.% Pt and heat-treated to a fully ordered condition, are examined using in-situ synchrotron radiation to determine transformation temperatures and phases formed, and to investigate mechanisms of ordering and disordering. These experiments are complemented by differential scanning calorimetry. Diffraction data show that the alloys can be separated into three groups according to their stable low-temperature ordered phase(s), namely L1₀, L1₂, or the two combined. Platinum increases transformation temperatures in comparison with binary AuCu, two-phase ordered alloys showing the highest transformation temperatures. Details of the evolution of the X-ray diffraction peak structures upon heating and cooling point to significant differences between mechanisms of disordering and ordering: whereas ordering visibly proceeds at significant undercooling by nucleation and growth, disordering appears, from the visible shifts in peak position, to progress in more homogeneous fashion within the alloy.     

Computer-aided method for quantification of cartilage thickness and volume changes using MRI: validation study using a synthetic model

The primary objective of this study was to develop a computer-aided method for the quantification of three-dimensional (3-D) cartilage changes over time in knees with osteoarthritis (OA). We introduced a local coordinate system (LCS) for the femoral and tibial cartilage boundaries that provides a standardized representation of cartilage geometry, thickness, and volume. The LCS can be registered in different data sets from the same patient so that results can be directly compared. Cartilage boundaries are segmented from 3-D magnetic resonance (MR) slices with a semi-automated method and transformed into offset-maps, defined by the LCS. Volumes and thickness are computed from these offset-maps. Further anatomical labeling allows focal volumes to be evaluated in predefined subregions. The accuracy of the automated behavior of the method was assessed, without any human intervention, using realistic, synthetic 3-D MR images of a human knee. The error in thickness evaluation is lower than 0.12 mm for the tibia and femur. Cartilage volumes in anatomical subregions show a coefficient of variation ranging from 0.11% to 0.32%. This method improves noninvasive 3-D analysis of cartilage thickness and volume and is well suited for in vivo follow-up clinical studies of OA knees.     

Physiologically based modeling of 3-D vascular networks and CT scan angiography

In this paper, a model-based approach to medical image analysis is presented. It is aimed at understanding the influence of the physiological (related to tissue) and physical (related to image modality) processes underlying the image content. This methodology is exemplified by modeling first, the liver and its vascular network, and second, the standard computed tomography (CT) scan acquisition. After a brief survey on vascular modeling literature, a new method, aimed at the generation of growing three-dimensional vascular structures perfusing the tissue, is described. A solution is proposed in order to avoid intersections among vessels belonging to arterial and/or venous trees, which are physiologically connected. Then it is shown how the propagation of contrast material leads to simulate time-dependent sequences of enhanced liver CT slices.     

Processing–formulation–performance relationships of polypropylene/short flax fiber composites

This work is a comprehensive study of the effect of extrusion process parameters and formulation on the properties of polypropylene (PP)/short flax fiber composites. The parameters that were varied during the twin‐screw extrusion process were screw configuration, revolutions per minute (rpm), extrusion temperature, and flow rate. The effect of the feeding zone location of cellulosic fiber was also considered. This study investigates the effect of the formulation, cellulosic fiber content, the presence of a coupling agent, and of a reactive additive on composite performance. The composites were characterized in terms of morphology and microstructure, fiber length, rheological, thermal, and mechanical properties. Sensibility to humidity and recyclability were also considered. When compared with as‐received PP, the tensile strength of injection‐molded parts increased with cellulosic content by up to 40 vol %, and the tensile modulus increased 3.5 times when a combination of coupling and reactive agents was used. Exposed to controlled humidity of 50% during 1 year, these composites exhibited a very low level of humidity uptake around 0.85 wt %. The processability of these materials using a cast film line and the mechanical properties of extruded sheets are also presented. Furthermore, these materials demonstrate a good recyclability using injection molding by keeping the integrality of their mechanical properties after five reprocessing cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41528.     

Decellularised Human Umbilical Artery as a Vascular Graft Elicits Minimal Pro-Inflammatory Host Response Ex Vivo and In Vivo

Small diameter (<6 mm) vessel grafts still pose a challenge for scientists worldwide. Decellularised umbilical artery (dUA) remains promising as small diameter tissue engineered vascular graft (TEVG), yet their immunogenicity remains unknown. Herein, we evaluated the host immune responses, with a focus on the innate part, towards human dUA implantation in mice, and confirmed our findings in an ex vivo allogeneic human setup. Overall, we did not observe any differences in the number of circulating white blood cells nor the number of monocytes among three groups of mice (1) dUA patch; (2) Sham; and (3) Mock throughout the study (day −7 to 28). Likewise, we found no difference in systemic inflammatory and anti-inflammatory cytokine levels between groups. However, a massive local remodelling response with M2 macrophages were observed in the dUA at day 28, whereas M1 macrophages were less frequent. Moreover, human monocytes from allogeneic individuals were differentiated into macrophages and exposed to lyophilised dUA to maximize an eventual M1 response. Yet, dUA did not elicit any immediate M1 response as determined by the absence of CCR7 and CXCL10. Together this suggests that human dUA elicits a minimal pro-inflammatory response further supporting its use as a TEVG in an allogeneic setup.     

The effects of vitamin E and selenium intake on oxidative stress and plasma lipids in hamsters fed fish oil

The aim of the present work was to test the effects of large-dose supplementation of vitamin E (Vit E) and selenium (Se), either singly or in combination, on fish oil (FO)-induced tissue lipid peroxidation and hyperlipidemia. The supplementation of Se has been shown to lower blood cholesterol and increase tissue concentrations of the antioxidant glutathione (GSH); however, the effects of Se supplementation, either alone or in combination with supplemental Vit E, on FO-induced oxidative stress and hyperlipidemia have not been studied. Male Syrian hamsters received FO-based diets that contained 14.3 wt% fat and 0.46 wt% cholesterol supplemented with Vit E (129 IU d-α-tocopheryl acetate/kg diet) and/or Se (3.4 ppm as sodium selenate) or that contained basal requirements of both nutrients. The cardiac tissue of hamsters fed supplemental Se showed increased concentrations of lipid hydroperoxides (LPO) but decreased oxidized glutathione (GSSG) concentrations. The higher concentrations of LPO in the hearts of Se-supplemented hamsters were not lowered with concurrent Vit E supplementation. In the liver, Se supplementation was associated with higher Se-dependent glutathione peroxidase activity and an increase in the GSH/GSSG ratio, whereas a lower hepatic non-Se-dependent glutathione peroxidase activity was seen with Vit E supplementation. Supplemental intake of Se was associated with lower plasma concentrations of total cholesterol and low density lipoprotein cholesterol plus very low density lipoprotein cholesterol. In view of the pro-oxidative effects of Se supplementation on cardiac tissue, a cautionary approach needs to be taken regarding the plasma lipid-lowering properties of supplemental Se.     

Functional and Molecular Properties of DYT-SGCE Myoclonus-Dystonia Patient-Derived Striatal Medium Spiny Neurons

Myoclonus-dystonia (DYT-SGCE, formerly DYT11) is characterized by alcohol-sensitive, myoclonic-like appearance of fast dystonic movements. It is caused by mutations in the SGCE gene encoding ε-sarcoglycan leading to a dysfunction of this transmembrane protein, alterations in the cerebello-thalamic pathway and impaired striatal plasticity. To elucidate underlying pathogenic mechanisms, we investigated induced pluripotent stem cell (iPSC)-derived striatal medium spiny neurons (MSNs) from two myoclonus-dystonia patients carrying a heterozygous mutation in the SGCE gene (c.298T>G and c.304C>T with protein changes W100G and R102X) in comparison to two matched healthy control lines. Calcium imaging showed significantly elevated basal intracellular Ca²⁺ content and lower frequency of spontaneous Ca²⁺ signals in SGCE MSNs. Blocking of voltage-gated Ca²⁺ channels by verapamil was less efficient in suppressing KCl-induced Ca²⁺ peaks of SGCE MSNs. Ca²⁺ amplitudes upon glycine and acetylcholine applications were increased in SGCE MSNs, but not after GABA or glutamate applications. Expression of voltage-gated Ca²⁺ channels and most ionotropic receptor subunits was not altered. SGCE MSNs showed significantly reduced GABAergic synaptic density. Whole-cell patch-clamp recordings displayed elevated amplitudes of miniature postsynaptic currents and action potentials in SGCE MSNs. Our data contribute to a better understanding of the pathophysiology and the development of novel therapeutic strategies for myoclonus-dystonia.     

Control of grain size and -orientation in multi-crystalline silicon ingots

Two different cooling rates have been imposed during the early solidification of two multi-crystalline silicon ingots with 250mm diameter and 100mm height in a pilot scale directional solidification furnace. This has been done by opening a variable heat leak system below the crucible in order to achieve a high initial cooling rate in one of the ingots. The grain-structure and -orientation of these two ingots have been investigated by light microscopy (LM) and electron backscattered diffraction (EBSD), and their electrical properties by quasi-steady state photo-conductance (QSSPC) and surface photovoltage (SPV) method. The ingot with the high initial cooling rate shows predominantly grains which are significantly larger than what is usually found in mc-Si. The minority carrier diffusion lengths measured on the large grains in the ingot with high cooling rate show higher values than those measured on the ingot with smaller grains. These results indicate that principles of grain size and -orientation control in mc-Si ingots can be applied to a pilot scale furnace, and the potential for up-scaling to industrial ingots with improved electrical properties and, thus, higher solar cell conversion efficiency.     

CF/PA12 composite femoral stems: Manufacturing and properties

The fabrication process for a novel carbon fiber-reinforced polymer (polyamide 12) composite femoral stem using inflatable bladder molding was studied. Effect of processing temperature, holding time and applied internal pressure on the consolidation quality of the composite was investigated. Consolidation quality was evaluated by density and void content measurements and scanning electron microscope analysis. As expected, void content (porosities) and presence of large resin pockets were found to increase for lower processing temperature, holding time and applied pressure. Crystallinity as well as melting temperatures measured using differential scanning calorimetry could be related to molding conditions. A progressive reduction of the previous thermal history (crystalline peak of neat composite) and an increase in crystallinity were obtained for higher molding temperature. Static compression testing with void content analysis of molded specimens was used to determine optimal molding conditions. The composite structure molded showed compressive modulus close to cortical bone’s. Compression load at failure of composites molded in optimal conditions were found to be three times higher than those of femoral bone for jumping on one leg or 10 times those for normal gait. The molded composite structure appears to be an excellent candidate for femoral stems used in total hip arthroplasty.     

When Memory Shifts Toward More Typical Category Exemplars: Accentuation Effects in the Recollection of Ethnically Ambiguous Faces.

In 4 studies, the authors examined the impact of categorization on the recollection of ethnically ambiguous faces. Participants were presented with faces lying at various locations on mixed-race continua (i.e., Caucasian-North African and Caucasian-Asian faces were used as source images in a morphing program). In all studies, the prevalence of exclusive ethnic features in a face distorted participants' recollections of the face toward faces more typical of the category. Specifically, the recollection of 30% North African (or 30% Asian) faces shifted toward Caucasian source faces, whereas the recollection of 70% North African (or 70% Asian) faces shifted toward North African (Asian) source faces. Memory distortions did not emerge for extremely ambiguous (50%) faces and proved larger on mixed-race than same-race continua (Studies 3 and 4). Memory distortions also emerged with high levels of confidence. The authors elaborate on the theoretical and practical implications of these findings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)