Stable CO2/water foam stabilized by dilute surface-modified nanoparticles and cationic surfactant at high temperature and salinity

CO₂ enhanced oil recovery and storage could see widespread deployment as decarbonization efforts accelerate to meet climate goals. CO₂ is more efficiently distributed underground as a viscous foam than as pure CO₂; however, most reported CO₂ foams are unstable at harsh reservoir conditions (22 wt% brine, 2200 psi, and 80°C). We hypothesize that silica nanoparticles (NP) grafted with (3-trimethoxysilylpropyl)diethylenetriamine ligands (N3), to improve colloidal stability, and dimethoxydimethylsilane ligands (DM), to improve CO₂-phillicity, combined with the cationic surfactant N¹-alkyl-N³, N³-dimethylpropane-1,3-diamine (RCADA), will develop viscous, stable CO₂ foams at reservoir conditions. We grafted NP with N3 and DM ligands. We verified NP stability at reservoir conditions with measurements of zeta potential, amine titration curves, and NP diameter. We measured NP water contact angles (θ_w) at the water–air and water–liquid CO₂ interfaces. In a high-temperature, high-pressure flow apparatus, we calculated the viscosity of CO₂ foams across a beadpack and determined static foam stability with microscope observations. Modified NP were colloidally stable at reservoir conditions for 4 weeks, and had higher θ_w in liquid CO₂ than in air. Addition of at least 0.5 μmol/m² DM silane (0.5DM) greatly improved foam stability. RCADA-only foam coarsening rates (dD_SM³/dt) decreased 16–17× after adding 1 wt/vol% 8N3 + 1.5DM NP, and 5–10× with a 0.1–1 vol/vol% increase in RCADA concentration (with or without NP). 1 vol/vol% RCADA foam exhibited coarsening rates of 900 and 2400 μm³/min with 1 and 0.2 wt/vol% 8N3 + 1.5DM NP, respectively. These results demonstrate impressive foam stabilities at harsh reservoir conditions.