Setting and nanostructural evolution of metakaolin geopolymer

The nanostructural evolution during formation of geopolymers and its correlation with setting have not been well understood. In this study, penetration resistance and ultrasonic wave reflection tests were conducted to measure setting, and solid‐state ²⁷Al NMR and liquid‐state ²⁹Si NMR were used to examine nanostructural changes in a metakaolin geopolymer as a function of time. Aluminum was released rapidly during the first 10 hour after mixing and immediately condensed with silicate species in solution to form larger sized aluminosilicate oligomers, which then condensed to form large structural units. Our evidence suggests these units form near metakaolin particle surface. Smaller sized silicate ions in the sol phase then attach to these units to form a gel with a more interconnected network structure. The initial stage of this attaching process was seen to be associated with set, which in this mixture occurred at 15 hour.     

Expression of a gene encoding chitinase (pCA 8 ORF) from Aeromonas sp. no. 10S-24 in Escherichia coli and enzyme characterization

A gene encoding chitinase from Aeromonas sp. no. 10S-24 was expressed using pTrc99A in Escherichia coli JM 105 which yielded a 5-fold higher activity than when pUC19 was used. Three different truncated enzymes (SA-1, SA-2 and SA-3) were obtained after purification. Their isoelectric points were 7.0, 6.9, and 6.7, respectively. The enzymes showed two optimum pHs, 4.0 and 7.0, when incubated with ethylene glycol chitin as the substrate, and were stable over a wide pH range (3.0-9.0). The optimum temperature was 60 degrees C and the enzymes were stable up to 50 degrees C. The chitinases exhibited wide substrate specificities for chitin-related compounds.     

Immunogenetics of episcleritis in leprosy

BACKGROUND: Neurenteric cysts are rare endothelium-lined structures. Two patients with symptomatic neurenteric cysts at the craniovertebral junction are presented. CASE PRESENTATION: Intermittent progression of neurologic symptoms delayed diagnosis for both patients. In one case, marked enlargement of the cyst was detected on serial imaging studies, and pathological examination of the excised lesion indicated rupture of the cyst. These cysts were totally resected by transoral or suboccipital approaches, as they were not firmly adherent to surrounding neural structures. The diagnosis of neurenteric cyst was confirmed by immunohistochemical analysis of the cyst wall. CONCLUSION: In view of the clinical course of these patients, we recommend early surgical resection of neurenteric cysts located at the craniovertebral junction.     

Surface grafting of poly(pentafluorostyrene) on the iron and iron oxide particles via reversible addition fragmentation chain transfer (RAFT) polymerization

A surface grafting technique is reported for synthesis of poly(pentafluorostyrene) via reversible addition fragmentation chain transfer onto iron (iron oxide) particles. 4‐Methoxydithiobenzoate is used for the RAFT chain transfer agent. The molecular weight, surface morphology, thickness, thermal properties, and monomer conversion of the grafted polymer are reported. The grafted poly(pentafluorostyrene)–iron particles show a higher thermal transition temperature compared to the nongrafted polymer because it is speculated that the covalent bond between the polymer backbone and the surface of the iron particles restricts the molecular mobility. The monomer conversion increases in proportion to the amount of chain transfer agent (CTA) concentration at early polymerization time. The grafted poly(pentafluorostyrene) shows a “hairy” like polymer architecture with fibril thickness in the range of 80 to 100 nm. A thin coating is expected to maintain the magnetic saturation properties of iron particles. To the best of our knowledge, this is the first time that poly(pentafluorostyrene) has been grafted onto the iron particles utilizing RAFT and 4‐methoxydithiobenzoate as a CTA. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44898.     

An ultraviolet phosphor from submicrometer-sized particles of gadolonium-doped yttrium oxide prepared by heating of precursors in a polymer solution

Gadolonium-doped yttrium oxide (Y₂O₃:Gd) was synthesized by simple heating of precursors in a polymer solution. This material is potentially useful as an ultraviolet source, since ultraviolet light is emitted when electron transition between energy states in Gd ions occurs. The grain sizes of the particles were found to be sub-micron down to several tens of nanometers. Optimum conditions for producing highly crystalline material with small grain and crystal sizes was investigated by varying the parameters for the synthesis, such as heating temperature, heating time, and dopant concentration. A heating temperature at 800 °C and a heating time of 30 min was optimum, i.e., appreciably high crystallinity and small grain sizes were produced. The particles produce ultraviolet light, peaking at 315 nm, and the intensity of the light depends on the dopant concentration. The maximum intensity was achieved at a dopant concentration of 5 to 10% at./at.     

TaqMan probe real‐time polymerase chain reaction targeting the ATPase 6 gene for the detection of pork adulteration in meat and meatballs

We developed an assay for detecting pork adulteration in meat and meatballs using real‐time polymerase chain reaction involving specific primers and a TaqMan probe targeting the porcine mitochondrial (mt) ATPase 6 gene. We proved the specificity of the probe by showing no amplification from DNA isolated from six different meat‐providing species: cattle, dog, mouse, chicken, goat, and horse. On the contrary, DNA isolated from pork was positive for amplification, with a Ct (threshold cycle) of 18.69 using a standard amount of DNA template (50 ng). The presence of matrix and food processing steps in meatball sample had no influence on the specificity of the probe. The developed technique also has a good repeatability (CV, coefficient of variation = 3.86% for meat and 5.07% for meatballs), showing good linearity and sensitivity, with a limit of detection up to 5 pg of pork total DNA, which equivalent to approximately 6.8 copies of pork mtDNA. In addition, the analysis of spiked pork in beef meatballs showed that the method could determine up to 1% pork contamination. Moreover, the system was successfully applied to detect pork adulteration in commercial meatballs by detecting the presence of pork DNA in two samples.     

Relative importance of Al(V) and reinforcement to the flexural strength of geopolymer composites

We prepared 1 cm × 1 cm × 10 cm geopolymer bars from sodium silicate and six commercial metakaolins, both unreinforced and reinforced with 20 wt% of 55-μm wollastonite (CaO·SiO₂) needles, to evaluate the relative contributions of five-coordinated aluminum in the metakaolin and the presence of a reinforcing phase to the flexural strength of geopolymers. Two metakaolins, with about 20 at% and lower of five-coordinated aluminum content, did not react sufficiently with our processing method and could not be tested. The flexural strengths of the other four geopolymers were similar at about 11–14 MPa unreinforced and 22–29 MPa reinforced. The effect of reinforcement on flexure strength is more significant than the choice of metakaolin provided that the metakaolin is reactive. The geopolymerization reaction depends on the amount of five-coordinated aluminum present in the metakaolin and is the primary difference between the samples that reacted and those that did not react.     

Expression of a gene encoding chitinase (pCA 8 ORF) from Aeromonas sp. no. 10S-24 in Escherichia coli and enzyme characterization

A gene encoding chitinase from Aeromonas sp. no. 10S-24 was expressed using pTrc99A in Escherichia coli JM 105 which yielded a 5-fold higher activity than when pUC19 was used. Three different truncated enzymes (SA-1, SA-2 and SA-3) were obtained after purification. Their isoelectric points were 7.0, 6.9, and 6.7, respectively. The enzymes showed two optimum pHs, 4.0 and 7.0, when incubated with ethylene glycol chitin as the substrate, and were stable over a wide pH range (3.0–9.0). The optimum temperature was 60°C and the enzymes were stable up to 50°C. The chitinases exhibited wide substrate specificities for chitin-related compounds.     

An inventory model involving back-order price discount when the amount received is uncertain

This paper presents and analyses the continuous review inventory model with order quantity, safety factor, back-order price discount, ordering cost and lead time as decision variables. Our work is based on the paper of Huang (2010 Huang, S.-P. (2010). Using simple and efficient algorithm involving ordering cost reduction and backorder price discount on inventory system under variable lead time. Information Technology Journal, 9(4), 804–810.[Crossref] , [Google Scholar]). We extend the model to incorporate the situation when the amount received is uncertain. The lead time demand is assumed follows a normal distribution. A solution procedure is developed to find the optimal solution. A numerical example is given to illustrate the model. A sensitivity analysis is also included to describe the effects of changes in the model parameters on the expected annual cost.