Detection of Chlamydia trachomatis infections in women by Amplicor PCR: comparison of diagnostic performance with urine and cervical specimens

We used the Roche Amplicor PCR assay to compare urine and cervical swabs as sample material in the detection of Chlamydia trachomatis causing genital infections. The diagnostic performance of Amplicor PCR was compared with that of cell culture and the Gen-Probe PACE 2 assay with cervical specimens. If discrepant from other results, the specimens negative by PCR were diluted and reanalyzed to reveal PCR inhibitors. Of 666 patients, 39 (5.9%) were confirmed to have chlamydial infection. The respective sensitivity and specificity of Amplicor PCR were as follows: urine specimens, 82.0 and 99.7%; cervical specimens, 82.0 and 99.8%. Those for cell culture with cervical specimens were 84.6 and 100%. For the Gen-Probe PACE 2 assay, the sensitivity and specificity with cervical specimens were 79.5 and 100%, respectively. Without the effect of PCR inhibitors, the sensitivity of PCR with urine would have been 97.4%. Provided that the problems currently caused by inhibitors will be solved, the Amplicor PCR assay with urine specimens offers a tempting alternative for the diagnosis of C. trachomatis infection in women.     

Copper and zinc metabolism in aspartylglycosaminuria and Salla disease

Changes in the metabolism of copper and zinc are described in aspartylglycosaminuria (AGU) patients. AGU patients had significantly reduced serum zinc concentrations. However, hair zinc levels were normal, and hyperzincuria could not be demonstrated. The copper content in the hair of AGU patients was highly elevated. Serum copper and ceruloplasmin concentrations were within normal range. In AGU, small-molecular-weight glycoasparagine storage products accumulate in tissues and are excreted in urine in large amounts. They may interfere with the transport mechanisms of trace elements, and thus alter their distribution and availability for tissues. The changes in copper and zinc levels may contribute to the pathogenesis of some of the clinical signs of AGU and Salla disease.     

Modification of phenol–formaldehyde resol resins by lignin,starch, and urea

Lignin‐based chemicals, starch, and urea were used as modifiers for phenol–formaldehyde resol resins. The effects of the addition stage of the modifiers used in the synthesis of the resins and the type of modification reagent on the structures of the resins and their molar masses and reactivities were investigated. The modifications with corn starch and lignin promoted condensation; this was verified by increased molar masses and high ratios of methylene bridges to the sum of free ortho and para aromatic groups with respect to the corresponding reference resin without a modification reagent. The later the modifier was added to the resin condensation mixture, the more methylene bridges were formed with respect to the amounts of free ortho and para aromatic groups. In addition, when urea or wheat starch was added in the later condensation stage, the final condensation also reached high stages. The modifications with lignosulfonate and starch, as well as the early addition of urea, enhanced p–p′ bridge structures. The lowest condensation stage and, therefore, the highest reactivity were found when wheat starch was added with the starting reagents. The curing heat of the wheat‐starch‐modified resins decreased according to the deferred addition point of starch. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 582–588, 2003     

Significance of Wood Terpenoids in the Resistance of Scots Pine Provenances Against the Old House Borer, Hylotrupes bajulus, and Brown-Rot Fungus, Coniophora puteana

We tested how terpenoid (i.e., monoterpenes and resin acids) composition and concentration in wood affects resistance against wood-borers and decaying fungi. Scots pine (Pinus sylvestris) wood from nine provenances having variable terpenoid profiles was studied against the old house borer, Hylotrupes bajulus, and the decay fungus, Coniophora puteana. Provenances represented a 1200-km N-S transect from Estonia to northern Finland, but they were all cultivated for 7 years in the same nursery field, in central Finland. Mean relative growth rate (MRGR) of small H. hajulus larvae positively correlated with the total monoterpene concentration of wood, and feeding was associated with high proportion of levopimaric+palustric acid in wood. Provenance did not affect the MRGR of small or big larvae, but big larvae consumed more wood and produced more frass on the northern Ylitornio trees than on the southern Rakvere and Ruokolahti trees. Low beta-pinene and total monoterpene concentration and low beta: alpha-pinene ratio in wood were all associated with a high number of eggs. The most northern Muonio provenance was the most favored as an oviposition site, differing significantly from Saaremaa, Tenhola, and Suomussalmi. Wood from Saaremaa, Tenhola, Ruokolahti, and Suomussalmi provenance was most resistant against decay fungus, differing significantly from that of Kinnula provenance. However, decay resistance was not clearly associated with the concentrations of wood terpenoids. These results suggest that monoterpene composition of wood affects resistance against wood-boring Cerambycid beetles, but resistance against wood-decaying fungi is not as clearly associated with wood terpenoids.     

Comparing the Variation of Needle and Wood Terpenoids in Scots Pine Provenances

We determined variation in both the concentration and composition of terpenoids in needles and wood within nine Scots pine (Pinus sylvestris) provenances. Seedlings of different provenances representing a 1200-km N–S transect from Estonia to northern Finland were cultivated in Suonenjoki nursery field, central Finland, for seven years. Growth of seedlings and the number of vertical resin ducts in wood were also determined. -Pinene and 3-carene were the major monoterpenes both in the needles and wood. The total monoterpene concentration was about five times higher in the needles than in the wood. A strong positive correlation was found between proportional quantities of several terpenes of the needles and wood, particularly for 3-carene, sabinene, and terpinolene. The needles contained both labdane-type and tricyclic resin acids, whereas the wood contained only tricyclic ones. The wood had a four times higher tricyclic resin acid concentration than the needles. The highest total monoterpene concentration in the needles and in the wood occurred in the most northern Muonio provenance and in the most southern Saaremaa provenance plants, respectively. The amount of high 3-carene genotype trees decreased among the northern provenances. The wood of the most northern Muonio provenance showed the lowest total resin acid concentration, but provenance did not affect total tricyclic resin acids in the needles. Korpilahti provenance trees from central Finland had the best growth in height. In addition, Korpilahti and Ruokolahti provenance trees showed largest radial growth of stem and smallest number of vertical resin ducts. The results suggest that especially the proportional quantity of 3-carene in the needles could be used in estimating the amount of this compound in the wood and vice versa.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.     

Safety Considerations during Different Stages of a Project Life Cycle in the Manufacturing Industry

At sites with multiple employers, efficient safety management is essential to ensure safety for both customers and providers. However, implementing effective safety management is challenging, particularly for companies that provide services. Provider companies encounter difficulties managing the safety of service projects for many reasons, including the variety of customers and changes in work environment. Proper preparation and integration of safety into the different project life cycle stages improves safety, but the topic has not received much attention to date. This article discusses the integration of safety considerations into service projects. Material was collected from Finnish manufacturing companies via interviews and a questionnaire. The results show that systematic methods for developing and producing services have not been adopted in the provider companies, but these are often implemented as a result of practical experience. On the other hand, providers and customers both believed that safety is taken into account during different stages of a given service project—safety issues were to some extent taken into account during the tendering and contract stages of a project, and preventive safety measures were commonly implemented during the delivery of services. However, safety performance often was not evaluated after completion of work. For this reason, companies may not have an accurate estimation of each other's safety performance in these types of multi‐employer situations. The results of this study can be used in provider organizations to help systematize safety considerations during service projects and to focus efforts on the most essential points of service project safety management.     

Processing intrusion detection alert aggregates with time series modeling

The main use of intrusion detection systems (IDS) is to detect attacks against information systems and networks. Normal use of the network and its functioning can also be monitored with an IDS. It can be used to control, for example, the use of management and signaling protocols, or the network traffic related to some less critical aspects of system policies. These complementary usages can generate large numbers of alerts, but still, in operational environment, the collection of such data may be mandated by the security policy. Processing this type of alerts presents a different problem than correlating alerts directly related to attacks or filtering incorrectly issued alerts.We aggregate individual alerts to alert flows, and then process the flows instead of individual alerts for two reasons. First, this is necessary to cope with the large quantity of alerts – a common problem among all alert correlation approaches. Second, individual alert’s relevancy is often indeterminable, but irrelevant alerts and interesting phenomena can be identified at the flow level. This is the particularity of the alerts created by the complementary uses of IDSes.Flows consisting of alerts related to normal system behavior can contain strong regularities. We propose to model these regularities using non-stationary autoregressive models. Once modeled, the regularities can be filtered out to relieve the security operator from manual analysis of true, but low impact alerts. We present experimental results using these models to process voluminous alert flows from an operational network.     

Engineered Multifunctional Albumin‐Decorated Porous Silicon Nanoparticles for FcRn Translocation of Insulin

The last decade has seen remarkable advances in the development of drug delivery systems as alternative to parenteral injection‐based delivery of insulin. Neonatal Fc receptor (FcRn)‐mediated transcytosis has been recently proposed as a strategy to increase the transport of drugs across the intestinal epithelium. FcRn‐targeted nanoparticles (NPs) could hijack the FcRn transcytotic pathway and cross the epithelial cell layer. In this study, a novel nanoparticulate system for insulin delivery based on porous silicon NPs is proposed. After surface conjugation with albumin and loading with insulin, the NPs are encapsulated into a pH‐responsive polymeric particle by nanoprecipitation. The developed NP formulation shows controlled size and homogeneous size distribution. Transmission electron microscopy (TEM) images show successful encapsulation of the NPs into pH‐sensitive polymeric particles. No insulin release is detected at acidic conditions, but a controlled release profile is observed at intestinal pH. Toxicity studies show high compatibility of the NPs with intestinal cells. In vitro insulin permeation across the intestinal epithelium shows approximately fivefold increase when insulin is loaded into FcRn‐targeted NPs. Overall, these FcRn‐targeted NPs offer a toolbox in the development of targeted therapies for oral delivery of insulin.     

Results of Finnish national survey on EU legislation concerning computer work

The European Directive on computer work (VDU 90/270/EEC) is implemented in the Finnish Government Decree. The aim of the present study was to evaluate the effects of the legislation and its applications in practice. The quantitative method used an online questionnaire. The respondents were employers (N = 934), employees (N = 1872) and occupational health care (OHC) units (N = 289). The majority of all these three groups considered the provisions clear and easy to understand, comprehensive, and easy to comply with. The provisions had a great impact on preventing mental overloading, arranging sight tests at the employer's cost, and on the refunding of eyeglasses for computer work. Most employers felt they did not need any more specific provisions, whereas half of the employees and OHC professionals would have liked the provisions to be more detailed. More explicit and specific regulations were also needed for practice applications in particular, as well as for the refunding of the costs of special eyeglasses for computer work. A total of 59% of the employers reported that costs of glasses are refunded, whereas the figure for employees was clearly lower (37%). OHC professionals reported that the costs of glasses were refunded in 82% of their customer workplaces. The practical conclusion is that employees' sight examinations and compensation for eyeglasses should be promoted in computer work. Moreover, ergonomic applications are best carried out in co-operation with OHC personnel.