A Stable Low Power Dissipating 9 T SRAM for Implementation of 4 × 4 Memory Array with High Frequency Analysis

Wireless Personal Communications - Today’s high speed data processing and memory storage operations demand immediate data write and retrieval to meet up to benchmark. To act as a volatile or...     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Monolithically-integrated BiVO4/p+-n GaAs1-xPx tandem photoanodes capable of unassisted solar water splitting

Monolithically-integrated tandem photoanodes were fabricated on substrates consisting of epitaxial n-GaAs_1-xP_x (x ? 0.32) grown on n⁺-GaAs wafers. A p⁺-n junction photovoltaic (PV) cell was first formed by zinc diffusion into the n-GaAs_0.68P_0.32 from a deposited ZnO coating. After diffusion the ZnO serves as a transparent electrical contact to the resulting p⁺-GaAs_0.68P_0.32 surface layer. Transparent, conducting SnO₂:F provides chemical and mechanical protection for the ZnO and the underlying PV cell, and it electrically connects this cell to a top BiVO₄ photocatalyst layer. In some photoanodes, a WO₃ thin film was interposed between the SnO₂:F and BiVO₄. All oxide coatings were produced by ultrasonic spray pyrolysis except WO₃, which was spin coated. Unassisted (unbiased) solar water splitting was achieved, with a solar-to-hydrogen efficiency approaching 2%, without addition of any co-catalyst to the BiVO₄ surface. This work can provide insights to other researchers regarding scalable, low cost approaches for the planar monolithic integration of oxide photoanode materials with PV cells to create new tandem devices.     

Determination of total non-sulphonated aromatic amines in tartrazine, sunset yellow FCF and allura red by reduction and derivatization followed by high-performance liquid chromatography.

Free and bound non-sulphonated aromatic amines (NSAA) are determined in the food colours tartrazine, sunset yellow FCF and allura red. After reduction of the bound amines with sodium dithionite, the NSAA are extracted into chloroform, then transferred to aqueous acid solution, diazotized with sodium nitrite and coupled with 2-naphthol-3,6-disulphonic acid, disodium salt (R-salt). Reversed-phase ion-pair liquid chromatography and an absorbance detector at 512 nm are used to analyse the coloured derivatives. Samples of dyes were spiked with known amounts of aniline, 1-naphthylamine, 2- and 4-aminobiphenyl, 4-aminoazobenzene, benzidine, p-cresidine or 4-nitro-p-cresidine bound to R-salt. Recoveries averaged 90% in tartrazine, 65% in sunset yellow FCF and 71% in allura red. Detection limits ranged between 2 and 32 ng/g. A survey of 24 commercial samples revealed levels up to 520 micrograms/g total NSAA. The majority of NSAA are bound to the coupling compound during the manufacturing process and less than 7% remain as free amines in the dye.     

Salt-water up-coning during extraction of fresh water from a tropical island

Rainwater can collect in a lens-shaped region within the rock of a tropical island, and may be separated from the underlying salt water by a sharp interface. This paper presents a nonlinear theory for determining the shape of this interface. The island is assumed to be saturated with rain, and provision is made for the outflow of rain-water through the sides of the island. The effect of a bore well on the shape of the interface is investigated, and the problem is solved using a spectral method. An integral-equation method is also presented for the case when the island has infinite width.     

Implementation of a mechanics-based system for estimating the strength of timber

The most accurate way of determining the strength of lumber requires destructive testing. An intelligent mechanics-based lumber-grading system was developed to provide a better estimation of the strength of a board nondestructively. This system processed X-ray-extracted geometric features (of 1080 boards that eventually underwent destructive strength testing) by using finite element methods to generate associated stress fields. The stress fields were then fed to a feature-extracting-processor, which produced 26 strength predicting features. The best strength predicting features were determined from the coefficient of determination (correlation r/sup 2/) between the features and actual strengths of the boards. The coefficients of determination of each feature (or combination of features), with the actual strength of the board, were calculated and compared. A coefficient of determination of 0.4158 was achieved by using a longitudinal (along the local grain angle) maximum stress concentration (MSC) feature to predict the estimated strength of lumber.     

Neurophysiological Model of the Normal and Abnormal Human Pupil

A model of the pathways controlling the size of the human pupil is presented. Computer simulation of this model demonstrates the role played by each of the elements in the pupil pathways. Simulations of the effects of drugs and a few common abnormalities in the system also help to illustrate the workings of the internal processes. Computer models of this type can be used as teaching aids or as tools for testing of hypotheses regarding the system.     

Self-monitoring processes and Holland Vocational Preferences among college students.

Examined the association between self-monitoring and occupational preferences. 237 undergraduates completed Snyder and Gangestad's (1986) revised self-monitoring scale and Holland's (1977) Vocational Preference Inventory (VPI). Regression analyses showed that men who valued congruence between their beliefs and behavior (i.e., low self-monitors) preferred social occupations. Men who were inclined to modify their behavior to fit social situations (i.e., high self-monitors) preferred enterprising occupations. In contrast, high self-monitoring women preferred artistic occupations. It is argued that these gender-neutral occupations permit high self-monitoring women to use their social skills but without the constraints found in male dominated enterprising occupations. Results support the assumption that people prefer occupations compatible with their social skills. Implications for career counseling and further research are noted. (PsycINFO Database Record (c) 2010 APA, all rights reserved)