High-dose intravenous steroid pulse therapy in thyroid-associated ophthalmopathy

MIcrospheres containing diclofenac sodium (DS) were prepared using carboxymethylcellulose (CMC) as the main support material (1.0, 2.0, 3.0% (w/v)) and aluminum chloride as the crosslinker. Drug to polymer ratios of 1:1, 1:2 and 1:4 were used to obtain a range of microspheres. The microspheres were then coated with an enteric coating material, Eudragit S-100, efficiency, % yield value, particle sizes an in-vitro dissolution behaviour were investigated. The surface of the enteric coated microspheres seemed to be all covered with Eudragit S-100 from scanning electron microscopy observation. It was also observed that increasing the CMC concentration led to an increase in the encapsulation efficiency, % yield value and particle size and decreased the release rate. Eudragit S-100 coating did not significantly alter the size but the release rate was significantly lower even when the lower concentration solution was used.     

Epidermodysplasia verruciformis accompanied by familial large granular lymphocytosis and a decrease in T lymphocytes

A 40-year-old man with epidermodysplasia verruciformis showed a decrease in peripheral blood T cells and abnormal expansion of large granular lymphocytes, accompanied by increased natural killer cell activity. Surface marker analysis of his large granular lymphocytes demonstrated that the subset, CD 57+ and CD 16+, had increased. His father, who had no skin lesions of epidermodysplasia verruciformis, displayed similar blood changes and his brother showed a decrease in T cells and a slight increase in CD 16+ natural killer cells, whereas his mother revealed only a slight decrease in T cells. Our present study indicates that epidermodysplasia verruciformis might be associated with hereditary abnormal expansion of large granular lymphocytes and a decrease in T cells.     

Interferon-gamma and interleukin-10 inhibit antigen presentation by Langerhans cells for T helper type 1 cells by suppressing their CD80 (B7-1) expression

CD80(B7-1) and CD86(B7-2) co-stimulatory molecules have been reported to activate Th1/Th2 development pathways differentially. It is well known that Langerhans cells (LC), potent antigen-presenting dendritic cells in the epidermis, express several co-stimulatory molecules and that this expression is modulated by several cytokines. Based on the recently reported effect of interferon (IFN)-gamma and interleukin (IL-)-10 on the expression of CD80 and CD86 by LC, we examined the effects of these cytokines on the expression of CD54 (intercellular adhesion molecule-1) and CD40 in addition to CD80 and CD86 on LC, and correlated the expression of each co-stimulatory molecule with antigen presentation for a Th1 clone by cultured LC (cLC) treated with these cytokines. LC cultured for 72 h significantly up-regulated MHC class II antigen expression and all the co-stimulatory molecules were examined. As previously reported, IL-10 or IFN-gamma inhibited the up-regulation of CD80 expression. Granulocyte/macrophage-colony-stimulating factor (GM-CSF) partially restored the suppression of CD80 expression induced by IFN-gamma on cultured LC, while it had virtually no effect on the inhibition induced by IL-10. Antigen presentation for the myoglobin-specific syngeneic Th1 clone by cLC, which were pre-incubated with these cytokines, correlated well with their CD80 expression. In addition, among the antibodies for CD80, CD86, CD28 or CD40, the suppression of the Th1 clone stimulation by LC was found to occur only with anti-CD80 and anti-CD28 antibodies. Finally, we studied the effects of IFN-gamma and IL-10 on GM-CSF production by epidermal keratinocytes (KC). We could show that only IFN-gamma, but not IL-10, suppressed GM-CSF production by KC. These findings suggest that both IFN-gamma and IL-10 suppress antigen presentation by LC for Th1 cells by suppressing their CD80 expression. The inhibitory effect of IFN-gamma on CD80 expression on LC appears to be partially mediated through the suppression of GM-CSF production by KC.     

Numerical analysis of short-circuit safe operating area forp-channel and n-channel IGBTs

The mechanisms of destructive failure of an insulated gate bipolar transistor (IGBT) at short-circuit state are discussed. Results from two-dimensional numerical simulation of p-channel and n-channel IGBTs are presented. It is found that there are two types of destructive failure mechanisms: a secondary breakdown and a latchup. Which type is dominant in p-channel and n-channel IGBTs depends on an absolute value of forward voltage |V_CE|. At moderately low |V _CE|, the p-channel IGBT is destroyed by secondary breakdown, and the n-channel IGBT, by latchup. This is due to the difference of a type of flowing carrier crossing a base-collector junction of wide base transistor and ionization rates of electrons and holes     

Fabrication of damascene Cu wirings using solid acidic catalyst

The copper damascene process is one of the most promising technologies for fabricating Cu wirings for electronic devices such as LSIs. In this research, the fabrication of damascene Cu wirings was conducted using solid acidic catalyst. When a Cu-plated wafer, whose oxide is a basic oxide is dipped into a mixture of oxidizing solution and acidic solution, surface atoms are ionized and etched off into the solution. However, because conventional nonelectrolytic etching does not have a reference surface, it is difficult to utilize for planarization. Therefore, a new nonelectrolytic machining method using a cation-exchange fabric instead of an acidic solution was developed. To be more precise, the planarization of a Cu-plated wafer was carried out by rubbing with the cation-exchange fabric in ozone water. Basically, this method exploits chemical reactions so that the physical properties of the workpiece surface are not deteriorated. Furthermore, this method uses no chemicals except for ozone water, which easily dissociates into water and oxygen molecules; thus, this method is a low-cost, environmentally friendly process. In this paper, as a preliminary experiment, the nonelectrolytic etching of a Cu sample using solutions of O₃ and CO₂ was carried out to inspect the dependence of the etching rate on [O₃] and [H⁺]. The results indicate that the etching rate increased as [O₃] and [H⁺] increased. When [H⁺] was high relative to [O₃], a smooth etch-pit-free surface was achieved. Next, nonelectrolytic etching using a cation-exchange fabric was carried out, and properties similar to those in the case of etching using solutions were obtained. Finally, damascene Cu wirings were fabricated using ozone water and a cation-exchange catalyst.     

氮化硅基陶瓷连接技术的研究进展

陶瓷连接技术是结构陶瓷实用化的有效手段，焊料成分对连接体的性能具有决定性作用。本文主要从焊料成分选择的角度，总结了氮化硅基陶瓷连接技术的发展现状；并重点讨论了陶瓷／玻璃复合焊料在β-Sialon陶瓷连接中的应用。     

Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

Crystalline complex between poly(γ-methyl l-glutamate) and dimethyl phthalate

The crystalline complex between poly(γ-methyl l-glutamate) (PMLG) and dimethyl phthalate (DMP) has been formed in films cast from a solution in dichloroethane. It has the stoichiometry of 1 mol of DMP to three or four residues of PMLG and shows two definite characteristics in X-ray diffraction patterns; one is the large hexagonal unit cell with the edge of around 28 Å and another the ‘extra’ 5.07 Å meridional reflection which can not be interpreted by a PMLG α-helical conformation. The structural examination for the films with various DMP contents is carried out by X-ray, viscoelastic, and d.s.c. measurements and the following structure is proposed for the crystalline complex. Four PMLG are associated to form a group which is hexagonally packed and DMP molecules, located in the gaps between groups, form a specific favourable helical structure along PMLG chains in which the van der Waals stacking of benzene rings of DMP is significant.     

Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.