Crosslinked acrylic pressure‐sensitive adhesives. II. Effect of humidity on the crosslinking reaction

The effect of humidity during storage on the crosslinking reactions of isocyanate groups was investigated with attenuated total reflectance Fourier transform infrared spectroscopy with pressure‐sensitive adhesives composed of poly[ethyl acrylate‐co‐(2‐ethylhexyl acrylate)‐co‐(2‐hydroxyethyl methacrylate)] as a base resin and polyisocyanate as a crosslinker. A peak‐resolving analysis of the amide II region revealed four bands. According to an analysis of the Fourier transform infrared spectra of the model compounds, these four bands were assigned to free urethane linkages, hydrogen‐bonded urethane linkages, free urea linkages, and hydrogen‐bonded urea linkages. As expected, storage under humid conditions led to the formation of free and hydrogen‐bonded urea linkages corresponding to the promotion of isocyanate consumption. Peak resolution of the amide II region was found to be a reasonable way of monitoring urethane and urea linkages during crosslinking reactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3039–3045, 2003     

Monitoring of human enteric viruses and coliform bacteria in waters after urban flood in Jakarta, Indonesia.

Floodwaters in Kampung Melayu village, Jakarta, Indonesia, as well as river water and consumable water (including groundwater and tap water) samples in flooded and non-flooded areas, were quantitatively analysed to assess occurrence of viruses and total coliforms and E. coli as bacterial indicators after flooding event. High numbers of enterovirus, hepatitis A virus, norovirus (G1, G2) and adenovirus were detected at high concentration in floodwaters and waters sampled from Ciliwung River which runs across metropolitan Jakarta and is used widely for agriculture and domestic purposes by poor residents. One out of three groundwater wells in the flooded area was contaminated with all viruses tested while no viruses were found in groundwater samples in non-flooded areas and tap water samples. The results revealed that human enteric viruses, especially hepatitis A virus and adenovirus, were prevalent in Jakarta, Indonesia. This study suggested that flooding posed a higher risk of viral infection to the people through contamination of drinking water sources or direct contact with floodwaters.     

Ecodesigns and applications for noble metal nanoparticles by ultrasound process

Ecodesigns for nano-sized noble metal particles were investigated by a new liquid-solid (metal oxide-alcohol) system. We have reduced noble metal oxides as low-emission starting materials by ultrasound and tried to fabricate various noble metal nanoparticles (Ag, Au, Pt, Pd) at room temperature, Noble metal oxides were investigated during decomposition. These reductions are ecologically clean, because many noble metal oxides are not toxic, and during decomposition, O/sub 2/ is evolved. By choosing suitable conditions, it is reasonable to expect that this simple sonochemical process can be extended to obtain nano-sized metal particles.     

Active sites of Cu-ZSM-5 for the decomposition of acrylonitrile

The catalytic decomposition of acrylonitrile (AN) over Cu-ZSM-5 prepared with various Cu loadings was investigated. AN conversion, during which the nitrogen atoms in AN were mainly converted to N₂, increased as Cu loading increased. N₂ selectivities as high as 90–95% were attained. X-ray diffraction measurements (XRD) and temperature-programmed reduction by H₂ (H₂-TPR) showed the existence of bulk CuO in Cu-ZSM-5 with a Cu loading of 6.4 wt% and the existence of highly dispersed CuO in Cu-ZSM-5 with a Cu loading of 3.3 wt%. Electron spin resonance measurements revealed that Cu-ZSM-5 contains three forms of isolated Cu²⁺ ions (square-planar, square-pyramidal, and distorted square-pyramidal). The H₂-TPR results suggested that in Cu-ZSM-5 with a Cu loading of 2.9 wt% and below, Cu⁺ existed even after oxidizing pretreatment. The activity of AN decomposition over Cu/SiO₂ suggested that CuO could form N₂, but, independent of the CuO dispersion, nitrogen oxides (NO_x) were formed above 350 °C. Cu⁺ and the square-pyramidal and distorted square-pyramidal forms of Cu²⁺ showed low activity for AN decomposition. Temperature-programmed desorption of NH₃ suggested that N₂ formation from NH₃ proceeded on Cu²⁺, resulting in the formation of Cu⁺. The Cu⁺ ions were oxidized to Cu²⁺ at around 300 °C. Thus, high N₂ selectivity over Cu-ZSM-5 with a wide range of temperature was probably attained by the reaction over the square-planar Cu²⁺, which can be reversibly reduced and oxidized.     

Effects of soil erosion on water quality and water uses in the upper Phong watershed.

The main objective of this paper is to simulate the effects of soil erosion on river water quality and on agricultural production as a result of the transformation of forestlands in the catchment of the upstream Phong River. Suspended solids carry down attached nutrients and agricultural chemicals causing water pollution in the downstream. There are four different types of land use in this simulation, namely forestlands, flatland and highland sugarcane plantation areas, and paddy fields. The highest mean annual amount of soil erosion is from paddy fields (585,700 tons/year), followed by highland (73,800 tons/year) and flatland (63,950 tons/year) sugarcane plantation areas and forestlands (41,800 tons/year), respectively. However, as most of paddy fields are located in a low land and are wet type cultivations, the soil erosion occurred has less impact on river water quality and its production compared to the soil erosion from the steeper slopes of highland plantation areas. Under the resource-based agriculture, the sugarcane production is mainly increased by expanding the plantation areas leading to a significant loss of topsoil and a considerable reduction of agricultural production. Soil erosion contributes to an increase in the average annual suspended solids concentration by 72 mg/l.     

New approach to environmentally benign epoxidation: the solid-phase-system using urea–H2O2 and recyclable dodecatungstate on apatite

On the basis of new concept using a solid disperse phase we have developed an efficient catalytic solid-phase-system for epoxidations of alkenes using urea–hydrogen peroxide (urea–H₂O₂) complex and cetylpyridinium dodecatungstate ((CetylPy)₁₀[H₂W₁₂O₄₂]) catalyst on fluorapatite (FAp). The recovered solid catalyst phase was reused to keep the catalytic activity after several times. In the conceptual idea it is a key point that in situ solid-phase-activation of the catalyst with urea–H₂O₂ proceeds to form microcrystals of the active species dispersed on the solid phase. The dispersion of the catalyst on FAp in the case of tungstic acid (H₂WO₄) was suggested by EPMA analysis. We proposed the peroxo type of species keeping the parent polyoxometalate framework as novel active species from FT-IR spectroscopic studies. FAp phase plays important roles of dispersing the active species on its surface to have high catalytic activity and of stabilizing the active species to lead to high reusability.     

Radiation tolerance for the SMASH-series front-end chips for a silicon micro-strip detector

The radiation tolerance for prototype front-end chips designed for a silicon micro-strip detector was examined with a ⁶⁰Co irradiation source to establish an allowable range of the radiation dose. The irradiated front-end chips were SMA²SH-64A, a 64-channel preamplifier array; SMA²SH-1, a single-channel preamplifier circuit with a comparator; and Control-C, a digital-control chip for the preamplifiers.     

Optical bistability and set-reset operation of a Fabry-Perotsemiconductor laser amplifier with two detuned light injections

Optical bistability in a Fabry-Perot semiconductor laser amplifier when two optical inputs detuned from the resonant wavelength of a semiconductor laser amplifier are injected is discussed. A split branch is found in the optical output versus input characteristics in addition to conventional optical bistability behavior. It is shown analytically and experimentally that set and reset can be achieved in the optical output of the semiconductor laser amplifier for each wavelength by applying two detuned optical pulses and using the split branch     

Blue electroluminescent devices withSrGa2S4:Ce for full-color display

In order to realize full-color electroluminescent (EL) displays, which are expected as a dominant candidate for the future multimedia flat panel display, blue EL devices with SrGa₂S₄:Ce have been prepared by molecular beam epitaxy (MBE). This paper proposes a novel deposition method employing Sr metal and Ga₂S₄ compound as the source materials. A single-phase SrGa₂S₄ layer is obtained in a Ga₂S₃/Sr flux ratio of 60 and at the growth temperature of 560°C. We have obtained the well-saturated blue with CIE color coordinates of x=0.14, y=0.14 and brighter blue EL devices made by optimizing the growth conditions in MBE. The maximum luminance of 70 cd/m² in comparison with the 3 cd/m₂ of our previous EL devices, is achieved at a driving frequency of 1 kHz