Establishment time of liquid flow in a bath agitated by bottom gas injection

The establishment time of gas-liquid two-phase flows in a cylindrical bath agitated by bottom gas injection through a central single-hole bottom nozzle was investigated. Because the turbulence intensity in the bath was comparable to or larger than the unity, the conventional definition of the flow establishment time based on the history of mean velocity was not suitable for the present case. In fact, it was difficult to determine the flow establishment time based on the well-known 90 or 99 pct criterion for the mean velocity. Accordingly, two methods of determining the flow establishment time by focusing on the turbulence components instead of the mean velocity components were proposed. Velocity measurements were made with a two-channel laser Doppler velocimeter. The flow establishment time was correlated as a function of gas flow rate. Close agreement was obtained by the two methods.     

Changes in Aging Behavior and Defect Structure of Yttria-Fully-Stabilized ZrO2 with Sc2O3 Doping

Methods of suppressing decreased conductivity in 8 mol% Y₂O₃-stabilized–92 mol% ZrO₂ (8YSZ) with aging were investigated. Different amounts of Sc₂O₃ were doped into 8YSZ. The electrochemical properties of Sc₂O₃-doped 8YSZ were measured, and the microstructural and local structural changes were characterized. The present results indicate that an appropriate amount of Sc₂O₃ doping, 3 or 4 mol%, effectively suppresses decreased conductivity with aging in 8YSZ.     

On approximate solutions for the deformation of plane anisotropic beams

Plane deformation of anisotropic beams with narrow rectangular cross sections exhibits coupling of stretching, bending and transverse shearing. For anisotropic cantilever beams with a stiff end-cap under end forces and an end couple, assessments were made for approximate solutions by comparing these with numerically exact finite element (FE) solutions. Specific attention is given to point-wise or approximate satisfaction of the end-fixity conditions. As approximate methodologies, (i) the elementary polynomial form of Airy's stress function for the plane stress problem in a rectangular region, (ii) a Timoshenko-type beam theory, and (iii) the Bernoulli-Euler beam theory were selected. Among these, only the polynomial form of Airy's stress function violates the point-wise end-fixity conditions. Both the polynomial Airy stress function and the Timoshenko-type beam theory successfully model the effects of transverse shear deformation and the coupling of stretching and transverse deflection. Analytical solutions demonstrate that the normal shear coupling effect increases linearly with the thickness-to-span ratios in axial normal stress and axial displacement, while the coupling manifests quadratically in transverse displacement. The comparison of end displacements with the numerically exact FE solutions indicates that the polynomial form of Airy's stress function is no better than the Timoshenko-type beam theory. Similar conclusions were reached for the problem of uniformly loaded cantilever beams. It has been found that the accurate prediction of the deformation of thick anisotropic beams with significant normal-shear coupling requires the use of higher order theories.     

软件工程专业汇编语言课程实践教学模式研究

本文提出了汇编语言课程学习对于软件人才能力培养的重要性,分析了汇编语言课程教学现状,提出了一些实践教学改革措施。     

水文监测创新在2016年长江洪水测报中的作用

2016年,长江中下游发生了区域性大洪水。为保证洪水预报的水文资料需求,长江委水文局通过建立的由水文监测管理体系、水文监测服务体系、水文监测技术支撑体系、水文监测质量保障体系等四大部分组成的水文监测体系创新与关键技术,以“巡测优先、驻巡结合、测报自动、应急补充”的新型水文监测模式,大大提升了防洪监测的能力和水平。与往次防洪监测比较,在应对2016年的大洪水的过程中,长江水文测验的新型模式带来了测洪能力、技术水平、准确度、时效性的系统性提升,其中,流量测验时间缩短了73%~83%,水情信息到报率和准确率达到99.95%,远远高于国家标准。     

Recoverable shear strain of liquid crystal‐forming concentrated hydroxypropyl cellulose solutions

The recoverable shear strain (S_R) for the liquid crystal‐forming hydroxypropyl cellulose solutions was determined by means of a concentric cylinder rotational apparatus as functions of shear stress prior to recovery and concentration of the solutions at 30°C. S_R greatly depended on shear stress and concentration; the phase of the solution (the single phase or biphase) governed the dependences of S_R on stress and concentration. S_R increased with increasing stress for the single phase and decreased for the biphase. S_R seemed to be related to the die swell (B): S_R ∝ Bⁿ. S_R exhibited a maximum and a minimum with respect to concentration. S_R for the cellulosic cholesteric liquid crystalline solutions was greater than that for the isotropic solutions. A model was proposed for explaining the greater S_R. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 865–872, 2002     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

汉江下游防洪对策初探

2003年9月,2005年10月和2010年7月,汉江中下游均发生了近20 a一遇的较大洪水,千里汉江干堤险象环生,汉江下游地区如今正成为长江防汛的一块“短板”。从汉江洪水特性、汉江下游防洪能力和汉江中下游防洪工程体系等方面进行了分析,初步认为,汉江丹江口水库调度复杂、汉江干堤防洪标准偏低、杜家台分洪工程尚未完建、汉江蓄洪民垸建设严重滞后,仍是汉江中下游防洪工程体系存在的主要问题,直接影响到汉江中下游的防洪调度。只有在丹江口水库按最终规模建成、汉江干堤按设计标准加高加固、杜家台分洪工程按设计标准完建、汉江蓄洪民垸按要求进行建设的情况下,才能基本上解除汉江下游的洪水灾害。     

Topology optimization for fluid–thermal interaction problems under constant input power

This paper deals with density-based topology optimization considering fluid and thermal interactions, in which the Navier–Stokes and heat transport equations are coupled. We particularly focus on designing heat exchangers. In the engineering context, heat exchangers are designed while considering a certain amount of input power. Therefore it is important to maximize the performance of a heat exchanger under a constant input power. In this paper we propose a way to control the input power by introducing an extra integral equation. To be more precise, in the fluid analysis, the inlet pressure is determined by solving the extra integral equation together with the Navier–Stokes equation. By doing this we can keep the inlet power constant even when the flow channels are changed in the optimization process. Consequently, the system of equations of the fluid field takes an integrodifferential form. On the other hand, in the heat transport analysis, a single governing equation is defined for simultaneously modeling both the solid and fluid parts. The design variable is a fluid fraction whose distribution represents the topology of the solid and fluid domains. When designing heat exchangers, two different heat conditions are considered in the formulation of the optimization problems, namely temperature-dependent and temperature-independent heat sources. Through the numerical examples for designing flow channels in a heat exchanger, it is shown that distinct topologies can be obtained according to the input power and the heat source conditions.     

Construction of human monoclonal single-chain Fv antibodies against small-cell lung cancer by phage display libraries derived from cell-immunized SCID mice engrafted with human peripheral blood lymphocytes

In this study, we describe a phage display strategy to obtain human monoclonal single-chain Fv (scFv) antibodies binding target cancer cell surface proteins. By developing a cancer cell immunization protocol for SCID mice engrafted with human peripheral blood lymphocytes in combination with an antibody phage display method, we have isolated phage antibodies binding small-cell lung cancer cell line H889 by subtractive selection. One of the isolated scFv antibodies, 12EAb, recognized the E2 component of pyruvate dehydrogenase complex (PDC-E2) by immunoprecipitation according to MALDI-TOF MS analysis. Furthermore, we have confirmed the plasma membrane localization of PDC-E2 in small-cell lung cancer cells by immunocytochemistry and cell surface protein biotinylation, although PDC-E2 is usually located in the mitochondrial matrix. These results, including unique localization of identified antigens, were obtained by proteomic approaches. The present methods can be applied to generate human monoclonal scFv antibodies against tumor cells and to identify new molecular targets for immunotherapy and markers for diagnosis.