Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Discovery of Affinity-Based Probes for Btk Occupancy Assays

Bruton's tyrosine kinase (Btk) is an attractive target for the treatment of a wide array of B-cell malignancies and autoimmune diseases. Small-molecule covalent irreversible Btk inhibitors targeting Cys481 have been developed for the treatment of such diseases. In clinical trials, probe molecules are required in occupancy studies to measure the level of engagement of the protein by these covalent irreversible inhibitors. The result of this pharmacodynamic (PD) activity provides guidance for appropriate dosage selection to optimize inhibition of the drug target and correlation of target inhibition with disease treatment efficacy. This information is crucial for successful evaluation of drug candidates in clinical trials. Based on the pyridine carboxamide scaffold of a novel solvent-accessible pocket (SAP) series of covalent irreversible Btk inhibitors, we successfully developed a potent and selective affinity-based biotinylated probe 12 (2-[(4-{4-[5-(1-{5-[(3aS,4S,6aR)-2-oxo-hexahydro-1H-thieno[3,4-d]imidazol-4-yl]pentanamido}-3,6,9,12-tetraoxapentadecan-15-amido)pentanoyl]piperazine-1-carbonyl}phenyl)amino]-6-[1-(prop-2-enoyl)piperidin-4-yl]pyridine-3-carboxamide). Compound 12 has been used in Btk occupancy assays for preclinical studies to determine the therapeutic efficacy of Btk inhibition in two mouse lupus models driven by TLR7 activation and type I interferon.     

科技奖——“孵蛋机器”

设计师将这件作品比喻成一个孕育生命的机器。像鸡蛋一样的外形最适合孕育生命，生命成长所需要的养分通过与“蛋体”连接的金线来传输，生命的生长情况可以通过一个透明的小窗来观察。     

Formation of a geometric pattern with a mobile wireless sensor network

Mobile wireless sensor networks (MWSNs) will enable information systems to gather detailed information about the environment on an unprecedented scale. These self‐organizing, distributed networks of sensors, processors, and actuators that are capable of movement have a broad range of potential applications, including military reconnaissance, surveillance, planetary exploration, and geophysical mapping. In many of the foreseen applications, the MWSN will need to form a geometric pattern without assistance from the user. In military reconnaissance, for example, the nodes will be dropped onto the battlefield from a plane and land at random positions. The nodes will be expected to arrange themselves into a predetermined formation in order to perform a specific task. Thus, we present algorithms for forming a line, circle, and regular polygon from a given set of random positions. The algorithms are distributed and use no communication between the nodes to minimize energy consumption. Unlike past studies of geometric problems where algorithms are either tested in simulations where each node has global knowledge of all the other nodes or implemented on a small number of robots, the robustness of our algorithms has been studied with simulations that model the sensor system in detail. The simulations demonstrate that the algorithms are robust against random errors in the sensors and actuators. © 2004 Wiley Periodicals, Inc.     

Situating natural language understanding within experience-based design

Building useful systems with an ability to understand "real" natural language input has long been an elusive goal for Artificial Intelligence. Well-known problems such as ambiguity, indirectness, and incompleteness of natural language inputs have thwarted efforts to build natural language interfaces to intelligent systems. In this article, we report on our work on a model of understanding natural language design specifications of physical devices such as simple electrical circuits. Our system, called KA, solves the classical problems of ambiguity, incompleteness and indirectness by exploiting the knowledge and problem-solving processes in the situation of designing simple physical devices. In addition, KA acquires its knowledge structures (apart from a basic ontology of devices) from the results of its problem-solving processes. Thus, KA can be bootstrapped to understand design specifications and user feedback about new devices using the knowledge structures it acquired from similar devices designed previously.In this paper, we report on three investigations in the KA project. Our first investigation demonstrates that KA can resolve ambiguities in design specifications as well as infer unarticulated requirements using the ontology, the knowledge structures, and the problem-solving processes provided by its design situation. The second investigation shows that KA's problem-solving capabilities help ascertain the relevance of indirect design specifications, and identify unspecified relations between detailed requirements. The third investigation demonstrates the extensibility of KA's theory of natural language understanding by showing that KA can interpret user feedback as well as design requirements. Our results demonstrate that situating language understanding in problem solving, such as device design in KA, provides effective solutions to unresolved problems in natural language processing.     

Electro‐optical transfer function preferences for LCD TVs: The effect of display brightness and surround illumination on preferred gamma

Abstract— Recent commercial liquid‐crystal‐display (LCD) televisions are larger and brighter than traditional televisions, thus impacting the viewing conditions in which they are viewed. These changes in viewing conditions may require different electro‐optical transfer functions (EOTFs) for LCD TVs than those for conventional TVs. Here, the way various EOTFs affect the preferred image quality of test images with changes in brightness and surround illumination conditions are examined. The first method used a gain, offset, and gamma (GOG) function with a range of gamma values, and the second method altered the intrinsic EOTFs. Image preference for the simulated EOTFs was determined using a paired‐comparison experiment for ten images. The first experiment took place in a darkened room at two display luminance levels. The results indicated that a gamma of 1.6 was most preferred overall although more so at a lower screen luminance level. In a second experiment, the procedure was repeated with a dim surround of 10% of the display's white point. With this surround, preference for a gamma value of around 1.6 at both screen luminance levels was more enhanced. These results indicated that image preference for different EOTFs is dependent on display luminance and that this dependence is maintained with a dim surround.     

SURFACE ALLOYING OF MILD STEEL BY LASER MELTING OF AN ELECTROLESS NICKEL DEPOSIT CONTAINING CHROMIUM CARBIDES

It is possible to realize surface alloys by laser melting an electroless nickel layer containing chromium carbide particles predeposited on a mild steel substrate. By this way the surface alloy is expected to have not only a high nickel content but also an important chromium content in order to improve the corrosion resistance. The presence of chromium in solid solution results from the dissolution or melting of the carbide particles. Typical laser solidification microstructures are obtained. Dendrites consist of an austenitic Fe-Ni-Cr solid solution and interdendritic regions are constituted by an eutectic mixture containing the same austenitic solid solution and complex Fe, Ni, Cr carbides and phosphides. In comparison with a surface alloy obtained by laser melting of an electroless nickel layer without carbide particles, the corrosion resistance was slightly improved in saline aqueous solutions. The limited effect was due to the fact that the final chromium content in the present experimental conditions was not as high as that initially expected.