Gouda Cheese with Modified Content of β-Casein as a Source of Peptides with ACE- and DPP-IV-Inhibiting Bioactivity: A Study Based on In Silico and In Vitro Protocol

In silico and in vitro methods were used to analyze ACE- and DPP-IV-inhibiting potential of Gouda cheese with a modified content of β-casein. Firstly, the BIOPEP-UWM database was used to predict the presence of ACE and DPP-IV inhibitors in casein sequences. Then, the following Gouda cheeses were produced: with decreased, increased, and normative content of β-casein after 1 and 60 days of ripening each (six variants in total). Finally, determination of the ACE/DPP-IV-inhibitory activity and the identification of peptides in respective Gouda-derived water-soluble extracts were carried out. The identification analyses were supported with in silico calculations, i.e., heatmaps and quantitative parameters. All Gouda variants exhibited comparable ACE inhibition, whereas DPP-IV inhibition was more diversified among the samples. The samples derived from Gouda with the increased content of β-casein (both stages of ripening) had the highest DPP-IV-inhibiting potency compared to the same samples measured for ACE inhibition. Regardless of the results concerning ACE and DPP-IV inhibition among the cheese samples, the heatmap showed that the latter bioactivity was predominant in all Gouda variants, presumably because it was based on the qualitative approach (i.e., peptide presence in the sample). Our heatmap did not include the bioactivity of a single peptide as well as its quantity in the sample. In turn, the quantitative parameters showed that the best sources of ACE/DPP-IV inhibitors were all Gouda-derived extracts obtained after 60 days of the ripening. Although our protocol was efficient in showing some regularities among Gouda cheese variants, in vivo studies are recommended for more extensive investigations of this subject.     

The Causes and Potential Injurious Effects of Elevated Serum Leptin Levels in Chronic Kidney Disease Patients

Leptin is an adipokine that regulates appetite and body mass and has many other pleiotropic functions, including regulating kidney function. Increased evidence shows that chronic kidney disease (CKD) is associated with hyperleptinemia, but the reasons for this phenomenon are not fully understood. In this review, we focused on potential causes of hyperleptinemia in patients with CKD and the effects of elevated serum leptin levels on patient kidney function and cardiovascular risk. The available data indicate that the increased concentration of leptin in the blood of CKD patients may result from both decreased leptin elimination from the circulation by the kidneys (due to renal dysfunction) and increased leptin production by the adipose tissue. The overproduction of leptin by the adipose tissue could result from: (a) hyperinsulinemia; (b) chronic inflammation; and (c) significant lipid disturbances in CKD patients. Elevated leptin in CKD patients may further deteriorate kidney function and lead to increased cardiovascular risk.     

MapReduce approach to relational influence propagation in complex networks

The relational label propagation problem for large data sets using MapReduce programming model was considered in the paper. The method we propose estimates class probability in relational domain in the networks. The method was examined on large real telecommunication data set. The results indicated that it could be used successfully to classify networks’ nodes and, thanks to that, new offerings or tariffs might be proposed to customers who belong to other providers. Moreover, basic properties of relational label propagation were examined and reported.     

Carbon nano-onion composites: Physicochemical characteristics and biological activity

Carbon nano-onion/surfactant (CNO/surfactant) composites offer the possibility to easily produce the soluble nanostructures. That approach combines the hydrophilicity of surfactants with the robustness of carbon structures to produce composites with superior and unusual physicochemical properties. We used the following surfactants: hexadecyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), 4-(1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol (Triton X-100), and polyethylene glycol sorbitan monolaurate (Tween 20) to non-covalently modify CNO surfaces. The existence of stable CNO composites are clearly evidenced by direct transmission electron microscopy observations, which are also supported by thermogravimetric analyses. Dynamic light scattering and zeta potential confirmed their dispersion and stability. Additionally, the biological activity of well-dispersed CNO/surfactant composites against a strain of Escherichia coli was assayed. In vitro antimicrobial assays for the composites revealed that only the CNO/CTAB composite decreased cell viability. This activity could be assigned to the simple composite dissociation in water solutions, however antimicrobial properties of the composite are slightly better when compared with pure CTAB. This indicate some synergic effect with respect to the properties of the pure surfactant.     

In Vitro Cytotoxicity,Colonisation by Fibroblasts and Antimicrobial Properties of Surgical Meshes Coated with Bacterial Cellulose

Hernia repairs are the most common abdominal wall elective procedures performed by general surgeons. Hernia-related postoperative infective complications occur with 10% frequency. To counteract the risk of infection emergence, the development of effective, biocompatible and antimicrobial mesh adjuvants is required. Therefore, the aim of our in vitro investigation was to evaluate the suitability of bacterial cellulose (BC) polymer coupled with gentamicin (GM) antibiotic as an absorbent layer of surgical mesh. Our research included the assessment of GM-BC-modified meshes’ cytotoxicity against fibroblasts ATCC CCL-1 and a 60-day duration cell colonisation measurement. The obtained results showed no cytotoxic effect of modified meshes. The quantified fibroblast cells levels resembled a bimodal distribution depending on the time of culturing and the type of mesh applied. The measured GM minimal inhibitory concentration was 0.47 µg/mL. Results obtained in the modified disc-diffusion method showed that GM-BC-modified meshes inhibited bacterial growth more effectively than non-coated meshes. The results of our study indicate that BC-modified hernia meshes, fortified with appropriate antimicrobial, may be applied as effective implants in hernia surgery, preventing risk of infection occurrence and providing a high level of biocompatibility with regard to fibroblast cells.     

Effect of the sintering temperature on microstructure and properties of Al2O3–Cu–Ni hybrid composites obtained by PPS

In the present research, the influence of sintering temperature on the microstructure and properties of Al₂O₃–Cu–Ni hybrid composites prepared by the Pulse Plasma Sintering (PPS) technique were described. In this research, three temperatures have been selected: 1250°C, 1300°C, and 1350°C. SEM observations were carried out to determine the distribution of the metallic phase in the composite depending on the sintering temperature. The conducted experiments and microscopic observations enabled a better understanding of the phenomena occurring between the ceramic matrix and metallic phase in the obtained materials. The mechanical properties like a hardness and fracture toughness were measured. The technology applied allowed us to obtain ceramic-metal composites with a homogeneous microstructure. It was found that the sintering temperature influences the selected physical and mechanical properties of the composites produced. It was found that samples produced at 1300°C are characterized by the highest relative density and the mechanical properties.     

Determination of Omega Fatty Acid Profiles in Egg Yolk by HILIC-LC-MS and GC-MS

The paper presents the analysis of the profile composition of fatty acids in the molecules of phosphatidylcholine and phosphatidylethanolamine, by using hydrophilic interaction liquid chromatography and gas chromatography coupled with mass spectrometry. The profiles of 15 phosphatidylcholine and 8 phosphatidylethanolamine species were analyzed with a newly developed hydrophilic interaction liquid chromatography (HILIC)–electrospray ionization (ESI)–tandem mass spectroscopy (MS/MS) method, by using a new stationary bonded phase. The application of the new method in control and experimental groups of egg yolk revealed significant differences in the composition of phospholipid species containing mainly polyunsaturated fatty acids. Additionally, using GC-MS, the profile of fatty acids in four groups with different dietary supplementation of hens was analyzed and 20 fatty acids in egg yolks were determined. Monounsaturated fatty acids were found in higher amounts than saturated fatty acids and polyunsaturated fatty acids in egg yolks. Oleic acid (18:1) was the major monounsaturated fatty acid in egg yolk while palmitic acid (16:0) was the major saturated fatty acid. Linoleic acid (18:2), arachidonic acid (20:4), and docosahexaenoic acid (22:6) reached the highest levels among the polyunsaturated fatty acids.     

Current state and perspectives for oilseed rape production for energy purposes in Poland

The article aims to analyze the current state and determine the perspectives for oilseed rape production for energy purposes in Poland. According to the study, in recent years the oilseed rape area for energy purposes and the production of biocomponents and biofuels from oilseed rape have been on the rise in Poland. The considerable and spatially concentrated energy potential of oilseed rape in Poland is noted. It is indicated that the greatest energy potential of the oilseed rape production is the four neighboring voivodeships: Dolno?l?skie, Opolskie, Wielkopolskie, and Kujawsko-Pomorskie.